[1] Cai J J, Wei X H, Lin S et al. Application and prospect of 3D printing technology in biomedical field[J]. Chinese Medical Equipment Journal, 42, 91-96(2021).

[2] Guo Z J, Zhong G C[J]. Application of modern 3D printing technology in aviation titanium alloy parts World Nonferrous Metals, 2020, 37-38.

[3] Martin J H, Yahata B D, Hundley J M et al. 3D printing of high-strength aluminium alloys[J]. Nature, 549, 365-369(2017).

[4] Lin X C, Liu H G. Continuous liquid interface production 3D printing technology and its application in fabrication of architecture models[J]. Acta Optica Sinica, 36, 0816002(2016).

[5] Zhang R H, Zhang J H, Zhu Y F, Measurement & Diagnosis et al. 36(2): 378-, 382, 407-408(2016).

[6] Zhang X J, Luo W Z, Zhang J et al. Development of a FBG water content sensor adopting FDM method and its application in field drying-wetting monitoring test[J]. Sensors and Actuators A: Physical, 297, 111494(2019).

[7] Hong C Y, Zhang Y F, Su D et al. Development of a FBG based hoop-strain sensor using 3D printing method[J]. IEEE Access, 7, 107154-107160(2019).

[8] Hong C Y, Yuan Y, Yang Y Y et al. A simple FBG pressure sensor fabricated using fused deposition modelling process[J]. Sensors and Actuators A: Physical, 285, 269-274(2019).

[9] Hong C Y, Zhang Y F, Abro Z A. A fiber Bragg grating-based inclinometer fabricated using 3-D printing method for slope monitoring[J]. Geotechnical Testing Journal, 43, 20170277(2020).

[10] Bao C Z, Hong C Y, Sun D A et al. Development and verification of carbon fiber based FBG earth pressure sensors using additive manufacturing technology[J]. Acta Optica Sinica, 40, 2106002(2020).

[11] Yao T Y, Ye J, Deng Z C et al. Tensile failure strength and separation angle of FDM 3D printing PLA material: experimental and theoretical analyses[J]. Composites Part B: Engineering, 188, 107894(2020).

[12] Kousiatza C, Karalekas D. In-situ monitoring of strain and temperature distributions during fused deposition modeling process[J]. Materials & Design, 97, 400-406(2016).

[13] Saenz F, Otarola C, Valladares K et al. Influence of 3D printing settings on mechanical properties of ABS at room temperature and 77 K[J]. Additive Manufacturing, 39, 101841(2021).

[14] Wang S Q, Lasn K, Elverum C W et al. Novel in situ residual strain measurements in additive manufacturing specimens by using the optical backscatter reflectometry[J]. Additive Manufacturing, 32, 101040(2020).

[15] Lin H T, Zhang L, Liu X et al. Research on dynamic characteristics of temperature sensing based on loop ring-down cavity with FBG[J]. Acta Optica Sinica, 40, 1006003(2020).

[16] Xia M, Tang X H, Wang Y et al. Comparative analysis of strain monitoring of the installed optical fiber composite overhead ground wire using BOTDA/R[J]. Acta Optica Sinica, 40, 1506001(2020).

[17] Wu J H, Liu H, Yang P et al. Identification and monitoring of concrete cracks based on optical frequency domain reflectometry technique[J]. Laser & Optoelectronics Progress, 56, 241201(2019).

[18] Zhang Z L, Sun Y Y, Zhang Q H et al. Applications of optical frequency-domain reflectometry technology in strain-deformed configuration conversion of structural surface deformed configuration measurement[J]. International Journal of Distributed Sensor Networks, 15, 15501477198(2019).

[19] Sun Y J, Zhang Q, Cheng G et al. Optical frequency domain reflectometry technology based theoretical analysis and experiment on strain transferring of surface-attached optical fiber sensor[J]. Science Technology and Engineering, 18, 46-52(2018).

[20] Qiu T G, Sun Y Y, Lu T M et al. Research on monitoring of horizontal displacement field of deep soil based on OFDR technology[J]. Piezoelectrics & Acoustooptics, 42, 108-112(2020).

[21] Suo L J, Lei Z K, Qu X X et al. A large strain demodulation method based on dynamic reference Rayleigh backscattering spectrum in distributed optical fiber strain measurement[J]. Journal of Experimental Mechanics, 34, 729-738(2019).

[22] Song J, Li W H, Lu P et al. Long-range high spatial resolution distributed temperature and strain sensing based on optical frequency-domain reflectometry[J]. IEEE Photonics Journal, 6, 1-8(2014).