[2] GOLDSTEIN A, SINGURINDI A. Al₂O₃/TiC based metal cutting tools by microwave sintering followed by hot isostatic pressing[J]. Journal of the American Ceramic Society, 1530(2010).

[4] EVANS A G, CANNON R M. Toughening of brittle solids by martensitic transformations[J]. Acta Metallurgica, 761(1986).

[5] CAI K F, MCLACHLAN D S, AXEN N et al. Preparation, microstructures and properties of Al₂O₃-TiC composites[J]. Ceramics International, 217(2002).

[6] GEVORKYAN E, RUCKI M, PANCHENKO S et al. Effect of SiC addition to Al₂O₃ ceramics used in cutting tools[J]. Materials, 5195(2020).

[9] XIA T, MUNIR Z, TANG Y et al. Structure formation in the combustion synthesis of Al₂O₃/TiC composites[J]. Journal of the American Ceramic Society, 507(2000).

[13] WU D, YU X, ZHAO Z. Direct additive manufacturing of TiC_p reinforced Al₂O₃-ZrO₂ eutectic functionally graded ceramics by laser directed energy deposition[J]. Journal of the European Ceramic Society, 2718(2023).

[14] LIU H, SU H, SHEN Z et al. Research progress on ultrahigh temperature oxide eutectic ceramics by laser additive manufacturing[J]. Journal of Inorganic Materials, 255(2022).

[15] WU D, YU C, WANG Q et al. Synchronous-hammer-forging- assisted laser directed energy deposition additive manufacturing of high-performance 316L samples[J]. Journal of Materials Processing Technology, 117695(2022).

[18] WU D, SHI J, NIU F et al. Direct additive manufacturing of melt growth Al₂O₃-ZrO₂ functionally graded ceramics by laser directed energy deposition[J]. Journal of the European Ceramic Society, 2957(2022).

[19] HUANG Y, WU D, ZHAO D et al. Process optimization of melt growth alumina/aluminum titanate composites directed energy deposition: effects of scanning speed[J]. Additive Manufacturing, 35: 101210(2020).

[20] WU D, ZHAO D, HUANG Y et al. Shaping quality, microstructure, and mechanical properties of melt-grown mullite ceramics by directed laser deposition[J]. Journal of Alloys and Compounds, 871: 159609(2021).

[21] SU H, ZHANG J, LIU L et al. Rapid growth and formation mechanism of ultrafine structural oxide eutectic ceramics by laser direct forming[J]. Applied Physics Letters, 1174(2011).

[22] ZHAO D, WU D, NIU F et al. Heat treatment of melt-grown alumina ceramics with trace glass fabricated by laser directed energy deposition[J]. Materials Characterization, 196: 112639(2023).

[23] HUANG Y, WU D, ZHAO D et al. Investigation of melt-growth alumina/aluminum titanate composite ceramics prepared by directed energy deposition[J]. International Journal of Extreme Manufacturing, 3: 035101(2021).

[24] WEI X, JIN M, YANG H et al. Advances in 3D printing of magnetic materials: fabrication, properties, and their applications[J]. Journal of Advanced Ceramics, 665(2022).

[28] VOIGT W. Ueber die beziehung zwischen den beiden elasticitätsconstanten isotroper körper[J]. Annalen Der Physik, 573(1889).

[29] REUSS A. Berechnung der fleissgrenze von mischkristallen auf grund der plastizitats bedingung für einkrisalle[J]. Zeitschrift für Angewandte Mathematik und Mechanik, 49(1929).

[30] YUAN P, GU D. Molten pool behaviour and its physical mechanism during selective laser melting of TiC/AlSi₁₀Mg nanocomposites: simulation and experiments[J]. Journal of Physics D: Applied Physics, 035303(2015).

[31] YUAN P, GU D, DAI D. Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites[J]. Materials and Design, 46(2015).

[33] GOINS P E, FRAZIER W E. A model of grain boundary complexion transitions and grain growth in yttria-doped alumina[J]. Acta Materialia, 79(2020).

[35] KIM Y W, LEE J G. Pressureless sintering of alumina-titanium carbide composites[J]. Journal of the American Ceramic Society, 1333(1989).

[36] ISHIDA K. Effect of grain size on grain boundary segregation[J]. Journal of Alloys and Compounds, 244(1996).

[37] TERWILLIGER C D, CHIANG Y M. Size-dependent solute segregation and total solubility in ultrafine polycrystals: Ca in TiO₂[J]. Acta Metallurgica Et Materialia, 319(1995).

[38] NIU F, WU D, YAN S et al. Process optimization for suppressing cracks in laser engineered net shaping of Al₂O₃ ceramics[J]. The Journal of The Minerals, Metals & Materials Society, 557(2016).

[39] LAWN B R, WILSHAW T R[M]. Fracture of brittle solids.

[40] WU D, YU X, ZHAO Z et al. One-step additive manufacturing of TiC_p reinforced Al₂O₃-ZrO₂ eutectic ceramics composites by laser directed energy deposition[J]. Ceramics International, 12758.

[41] LANGE F F. Fracture mechanics of ceramics[J]. Ceramurgia International, 142(1978).

[42] GUO J K. The Exploration on new approach of strengthening and toughening of ceramic materials[J]. Journal of Inorganic Materials, 23(1998).

[43] AHSAN M N, BRADLEY R, PINKERTON A J. Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causes[J]. Journal of Laser Applications, 807(2011).

[44] KOBRYN P A, MOORE E H. The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti₆A1₄V[J]. Scripta materialia, 299(2000).

[45] SUSAN D F, PUSKAR J D, BROOKS J A et al. Quantitative characterization of porosity in stainless steel LENS powders and deposits[J]. Materials Characterization, 36(2006).

[46] NIU F, WU D, LU F et al. Microstructure and macro properties of Al₂O₃ ceramics prepared by laser engineered net shaping[J]. Ceramics International, 14303(2018).

[47] FRANCISCO I D, MERINO R I, ORERA V M et al. Growth of Al₂O₃/ZrO₂(Y₂O₃) eutectic rods by the laser floating zone technique: effect of the rotation[J]. Journal of the European Ceramic Society, 1341(2005).

[48] WU D, HUANG Y, NIU F et al. Effects of TiO₂ doping on microstructure and properties of directed laser deposition alumina/ aluminum titanate composites[J]. Virtual and Physical Prototyping, 371(2019).

[49] ZHAO D, WU D, SHI J et al. Microstructure and mechanical properties of melt-grown alumina-mullite/glass composites fabricated by directed laser deposition[J]. Journal of Advanced Ceramics, 75(2022).

[50] PETCH N J. The cleavage strength of polycrystals[J]. Journal of the Iron and Steel Institute, 25(1953).

[51] HALL E O. The deformation and ageing of mild steel: III discussion of results[J]. Proceedings of the Physical Society of London, 747(1951).