[1] [1] ZHAI Zh Y,MEI X S,WANG W J,et al. Research advancement on laser etching technology of silicon carbide ceramic matrix composite［J］. Chinese Journal of Lasers,2020,47(6):0600002(in Chinese).

[2] [2] LI Ch R,GAO C,SHI P Ch, et al. Multi-scale interface simulation research and development of fiber reinforced resin composites［J］. Composites Science and Engineering,2020(11):116-122(in Chinese).

[3] [3] JI L B, ZHU X W, DING J P,et al. Progress in research and application on carbon fiber reinforced polymer in passenger cars［J］. Automotive Digest,2020(9):17-22(in Chinese).

[4] [4] ZHANG W Q,LI Zh C,WU T Y,et al. Molecular simulation research and development of cross-linked structure and macroscopic properties of epoxy resin and its composites［J］. Acta Materiae Compositae Sinica,2019,36(2):269-276(in Chinese).

[5] [5] MELTEM A K, HASAN G. A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials［J］.Defence Technology,2018,14(4):318-326.

[6] [6] JIAN L Y,LIN Y X. Review of milling of carbon fiber reinforced plastic［J］. Tool Engineering,2014,48(4):3-6(in Chinese).

[7] [7] PHAPALE K,SINGH R,SINGH R. Comparative assessment of delamination control techniques in conventional drilling of CFRP［J］. Procedia Manufacturing,2020, 48:123-130.

[8] [8] PHAPALE K,SINGH R,PATIL S, et al. Delamination characterization and comparative assessment of delamination control techniques in abrasive water jet drilling of CFRP［C］// 44th North American Manufacturing Research Conference. Amsterdam, The Netherlands: Elsevier Science,2016:521-535.

[9] [9] SEZER M, UGUR K, MEHMET B, et al. Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study［J］. Composites,2018, B147:1-11.

[10] [10] KAKINUMA Y,ISHIDA T,KOIKE R, et al. Ultrafast feed drilling of carbon fiber-reinforced thermoplastics［C］//15th Machining Innovations Conference for Aerospace Industry .Amsterdam, The Netherlands: Elsevier Science,2015:91-95.

[11] [11] AKSHAY H,DILPREET S,SAGAR K,et al. Machining damage in FRPs: Laser versus conventional drilling［J］. Composites,2016, A82:42-52.

[12] [12] YE Y Y,JIA S H,XU Z F,et al. Research on hole drilling in carbon fiber reinforced composite by using laser cutting method［J］. Aeronautical Manufacturing Technology,2019,62(18):50-55(in Chinese).

[13] [13] STOCK J W, ZAEH M F, SPAETH J P. Remote laser cutting of CFRP: Influence of the edge quality on fatigue strength［J］.Proceedings of the SPIE,2014:8963:89630T.

[14] [14] PANG S Q,LIU W Ch. A study on the process and mechanisms of laser machining of high-performance composites［J］. Acta Armamentarii,1992,13(4):84-91(in Chinese).

[15] [15] TAO N, CHEN G Y, YU T Y, et al. Dual-beam laser drilling process for thick carbon fiber reinforced plastic composites plates［J］. Journal of Materials Processing Technology,2020, 281: 116590 .

[16] [16] TAKAHASHI K, TSUKAMOTO M, MASUNO S, et al. Heat conduction analysis of laser CFRP processing with IR and UV laser light［J］. Composites,2016, A84:114-122.

[17] [17] ZHU D Zh,HU J.Experimental study on picosecond pulsed laser machining of carbon fiber reinforced plastics［J］. Aeronautical Manufacturing Technology,2017,60(20):54-59(in Chinese).

[18] [18] EL-HOFY M H, EL-HOFY H. Laser beam machining of carbon fiber reinforced composites: A review［J］. Springer London,2019, 101(9):2965-2975.

[19] [19] ZHANG K H,YU Y,ZHANG X M,et al. Laser cutting induced heat affected zone in fiber reinforced polymer: A comparative analysis［J］. Navigation and Control,2019,18(5):60-66(in Chinese).

[20] [20] ZHANG J L,LIU G D,WANG W P,et al. Simulation to thermal ablation of carbon fiber reinforced composites under laser irradiation［J］. High Power Laser and Particle Beams,2013,25(8):1888-1892(in Chinese).

[21] [21] ROMOLI L, FISCHER F, KLING R. A study on UV laser drilling of PEEK reinforced with carbon fibers［J］. Optics and Lasers in Engineering,2011, 50(3):449-457.

[22] [22] DELL’ERBA M, GALANTUCCI L M,MIGLIETTA S. An experimental study on laser drilling and cutting of composite materials for the aerospace industry using excimer and CO2 sources［J］. Composites Manufacturing,1992, 3(1):14-19.

[23] [23] MEIJER J,DU K,GILLNER A,et al. Laser machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons［J］. CIRP Annals-Manufacturing Technology,2002, 51(2):531-550.

[24] [24] GOEKE A,EMMELMANN C. Influence of laser cutting parameters on CFRP part quality［J］. Physics Procedia,2010, B5:253-258.

[25] [25] FUJITA M, OHKAWA H, SOMEKAWA T, et al. Wavelength and pulsewidth dependences of laser processing of CFRP［C］//9th International Conference on Photonic Technologies. Amsterdam, The Netherlands: Elsevier Science,2016:1031-1036.

[26] [26] WOLYNSKI A, HERRMANN T,MUCHA P, et al. Laser ablation of CFRP using picosecond laser pulses at different wavelengths from UV to IR［J］. Physics Procedia,2011, B12:292-301.

[27] [27] LI J Y, CHAO J H, MING Z, et al. Study on UV laser cutting carbon fibre reinforced composites［J］. Applied Mechanics and Materials,2014, 3484:738-742.

[28] [28] JIANG Sh Sh. Research of damage characteristics of carbon fiber reinforced epoxy resin by millisecond/nanosecond laser［D］.Changchun: Changchun University of Science and Technology,2018:9-46(in Chinese).

[29] [29] ZHAO X. Research on processing of carbon fiber materials based on the short pulse laser［D］. Haerbin : Harbin Institute of Technology,2014:12-23(in Chinese).

[30] [30] ZHANG X J,WANG J Ch,SHEN J J. Research status of thermal damage in laser processing of carbin fiber reinforced plastic［J］. Applied Laser,2019,39(6):1041-1044(in Chinese).

[31] [31] HERZOG D, JAESCHKE P,MEIER O, et al. Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRP［J］. International Journal of Machine Tools and Manufacture,2008, 48(12):1464-1473.

[32] [32] FENOUGHTY K A, JAWAID A, PASHBY I R. Machining of advanced engineering materials using traditional and laser techniques［J］. Elsevier,1994, 42(4):391-400.

[33] [33] SCHNEIDER F,WOLF N,PETRING D. High power laser cutting of fiber reinforced thermoplastic polymers with CW- and pulsed lasers［C］//7th International WLT Conference on Lasers in Manufacturing. Amsterdam, The Netherlands: Elsevier Science,2013:415-420.

[34] [34] WALTER J,BRODESSER A, HUSTEDT M, et al. Laser processing of carbon fiber reinforced plastics-release of carbon fiber segments during short-pulsed laser processing of CFRP［C］//9th International Conference on Photonic Technologies. Amsterdam, The Netherlands: Elsevier Science, 2016:1021-1030.

[35] [35] OLIVEIRA V,SHARMA S P,DEMOURA M F S F, et al. Surface treatment of CFRP composites using femtosecond laser radiation［J］. Optics and Lasers in Engineering,2017, 94:37-43.

[36] [36] OHIN S, LEE Y, PARK Y B, et al. Investigation of cut quality in fiber laser cutting of CFRP［J］. Optics and Laser Technology,2019, 113:129-140.

[37] [37] LEONE C,GENNA S. Heat affected zone extension in pulsed Nd∶YAG laser cutting of CFRP［J］. Composites Part,2018, B140:174-182.

[38] [38] RIVEIRO A,QUINTERO F,LUSQUINOS F, et al. Laser cutting of carbon fiber composite materials［C］//7th Manufacturing-Engineering-Society International Conference. Amsterdam, The Netherlands: Elsevier Science ,2017:388-395.

[39] [39] LI M J, LI Sh, YANG X J, et al. Fiber laser cutting of CFRP laminates with single-and multi-pass strategy: A feasibility study［J］. Optics and Laser Technology,2018, 107:443-453.

[40] [40] LEONE C,PAPA I,TAGLIAFERRI F, et al. Investigation of CFRP laser milling using a 30W Q-switched Yb∶YAG fiber laser: Effect of process parameters on removal mechanisms and HAZ formation［J］. Composites,2013, A55:129-142.

[41] [41] MATHEW J,GOSWAMI G L,RAMAKRISHNAN N, et al. Parametric studies on pulsed Nd∶YAG laser cutting of carbon fibre reinforced plastic composites［J］. Journal of Materials Processing Technology,1999, 89:198-203.

[42] [42] FREITAG C,ONUSEIT C,WEBER R, et al. High-speed observation of the heat flow in CFRP during laser processing［C］//7th Conference on Laser Assisted Net shape Engineering (LANE) / International Conference on Photonic Technologies. Amsterdam, The Netherlands: Elsevier Science,2012:171-178.

[43] [43] TAKAHASHI K,TSUKAMOTO M,MASUNO S, et al. Influence of laser scanning conditions on CFRP processing with a pulsed fiber laser［J］. Journal of Materials Processing Technology,2015, 222:110-121.

[44] [44] PAGANO N,ASCARI A,LIVERANI E, et al. Laser Interaction with Carbon Fibre Reinforced Polymers［C］//9th CIRP International Conference on Intelligent Computation in Manufacturing Engineering. Amsterdam, The Netherlands: Elsevier Science,2015:423-427.

[45] [45] HE F,HU Zh L,LIU P. Influence of process parameters on cutting quality in optical fiber laser cutting［J］. Forging & Stamping Technology,2020,45(11):82-88.

[46] [46] FUCHS A N,SCHOEBER M,TREMMER J, et al. Laser cutting of carbon fiber fabrics［C］//7th International WLT Conference on Lasers in Manufacturing. Amsterdam, The Netherlands: Elsevier Science,2013:372-380.

[47] [47] HUA Y Q,XIAO T,XUE Q,et al. Experimental study about laser cutting of carbon fiber reinforced polymer［J］. Laser Technology,2013,37(5):565-570(in Chinese).

[48] [48] NEGARESTANI R, LIN L,SEZER H K, et al. Nano-second pulsed DPSS Nd∶YAG laser cutting of CFRP composites with mixed reactive and inert gases［J］. The International Journal of Advanced Manufacturing Technology,2010, 49(5/8):553-566.

[49] [49] KONONENKO T V,FREITAG C,KOMLENOK M S,et al.Oxygen-assisted multipass cutting of carbon fiber reinforced plastics with ultra- shortlaser pulses［J］.Journal of Applied Physics, 2014,115(10): 103-107.

[50] [50] KAAKKUNEN J J J,SILVENNOINEN M,PAIVASAARI K, et al. Water-assisted femtosecond laser pulse ablation of high aspect ratio holes［J］. Physics Procedia,2011, B12:89-93.

[51] [51] WEE L M, LING E K, CHI W T, et al. Solvent-ssisted laser drilling of silicon carbide［J］. International Journal of Applied Ceramic Technology,2011, 8(6):1263-1276.

[52] [52] ZHANG Ch.Experimental study on water jet assisted laser cutting of carbin fiber reinforced polymer comosite［D］. Wuxi:Jiangnan University,2018:29-47(in Chinese).

[53] [53] VIBOON T,KETSADA K,QI H. Investigation into laser machining of carbon fiber reinforced plastic in a flowing water layer［J］. The International Journal of Advanced Manufacturing Technology,2019, 104(9/12):3629-3645.

[54] [54] SUN D, HAN F Zh, YING W Sh. The experimental investigation of water jet-guided laser cutting of CFRP［J］. The International Journal of Advanced Manufacturing Technology, 2019,102(4): 719-729.

[55] [55] SUN D, HAN F Zh, YING W Sh, et al. Surface integrity of water jet guided laser machining of CFRP［C］//4th CIRP Conference on Surface Integrity. Amsterdam, The Netherlands: Elsevier Science,2018:71-74.

[56] [56] ZHANG Y N, QIAO H Ch, ZHAO J B, et al. Numerical simulation of water jet-guided laser micromachining of CFRP［J］. Materials Today Communications, 2020,25: 2352-4928.

[57] [57] SOBRI S A,HEINEMANN R,WHITEHEAD D. Development of laser drilling strategy for thick carbon fiber reinforced polymer composites (CFRP) ［J］. Polymers,2020, 12(11): 2674.

[58] [58] SONG Sh H. Experimental study on laser cutting of carbon fiber composites［J］. Machinery,2015,53(9):49-51(in Chinese).

[59] [59] KUMAR D, SINGH K K. Effect of nanofiller on fibre laser drilling quality of carbon fibre reinforced polymer composite laminates［J］. Proceedings of the Institution of Mechanical Engineers, 2019, 233(4):857-870.

[60] [60] FAN Y Q. Study on processing characteristics of CFRP based on deionized water mixed with carbon nanotubes using EDM［D］. Haerbin:Harbin Institute of Technology,2018:12-63(in Chinese).

[61] [61] HAN X,WANG X Y. Experimental study on laser cutting of double-layer carbon fiber reinforced plastics sheets［J］. Modern Machinery,2019,212(4):50-56(in Chinese).

[62] [62] DING J G,GONG Y,YANG F H, et al. Research progress on recovery methods of thermosetting resin composites［J］.Modern Chemical Industry, 2020,40(3):22-25(in Chinese).

[63] [63] ZHANG Q,ZHANG Sh J. Research development on carbon fiber reinforced thermoplastic composites［J］. Petrochemical Technology,2020,49(12):1153-1164(in Chinese).

[64] [64] YU D Y,WANG X Y.Temperature field simulation of single-layer carbon fiber reinforced plastics in multi-directional laser cutting［J］. Laser and Optoelectronics Progress,2017,54(11):111409(in Ch-inese).