[1] [1] Fu X A, Zorman C A and Mehregany M 2004 Surface roughness control of 3C-SiC films during the epitaxial growth process J. Electrochem. Soc. 151 G910

[2] [2] Davim J P and Jackson M J 2009 Nano and Micromachining (Hoboken, NJ: Wiley)

[3] [3] Yoon H S, Park B and Jun S C 2013 Surface roughness effects on the frequency tuning performance of a nanoelectromechanical resonator Nanoscale Res. Lett. 8 270

[4] [4] HanJH,ChenYB,WangJP, ZhangGQandWangHT 2022 A review of molecular dynamics simulation in studying surface generation mechanism in ultra-precision cutting Int. J. Adv. Manuf. Technol. 122 1195–231

[5] [5] Lee K K, Lim D R, Luan H C, Agarwal A, Foresi J and Kimerling L C 2000 Effect of size and roughness on light transmission in a Si/SiO2 waveguide: experiments and model Appl. Phys. Lett. 77 1617–9

[6] [6] Frost F, Ziberi B, Schindler A and Rauschenbach B 2008 Surface engineering with ion beams: from self-organized nanostructures to ultra-smooth surfaces Appl. Phys. A 91 551–9

[7] [7] ZhangZY,CuiJF,ZhangJB,LiuDD,YuZJandGuoDM 2019 Environment friendly chemical mechanical polishing of copper Appl. Surf. Sci. 467–468 5–11

[8] [8] GuoXG,GouYJ,DongZG,Yuan S,LiM,DuWHand Kang R K 2020 Study on subsurface layer of nano-cutting single crystal tungsten in different crystal orientations Appl. Surf. Sci. 526 146608

[9] [9] Pramanik A, Neo K S, Rahman M, Li X P, Sawa M and Maeda Y 2003 Cutting performance of diamond tools during ultra-precision turning of electroless-nickel plated die materials J. Mater. Process. Technol. 140 308–13

[10] [10] Wang J H, Dong S, Wang H X, Chen M J, Zong W J and Zhang L J 2007 Forecasting of surface roughness and cutting force in single point diamond turning for KDP crystal Key Eng. Mater. 339 78–83

[11] [11] Wang Z Y, Dong L H, Wang D S and Dong Y H 2012 Study of HPHT single crystal diamond as precision cutting tool material Precis. Eng. 36 162–7

[12] [12] Chen Y L, Cai Y D, Xu M L, Shimizu Y, Ito S and Gao W 2017 An edge reversal method for precision measurement of cutting edge radius of single point diamond tools Precis. Eng. 50 380–7

[13] [13] Sato Y and Yan J W 2022 Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo Int. J. Extrem. Manuf. 4 025102

[14] [14] Mathew P T, Rodriguez B J and Fang F Z 2020 Atomic and close-to-atomic scale manufacturing: a review on atomic layer removal methods using atomic force microscopy Nanomanuf. Metrol. 3 167–86

[15] [15] Huang N, Yan Y, Zhou P, Kang R K and Guo D M 2019 Elastic–plastic deformation of single-crystal silicon in nano-cutting by a single-tip tool Jpn. J. Appl. Phys. 58 086501

[16] [16] Sujuan W, Hao S, Haojie M, Feng X and Ziqiang Y 2019 Characterization of the material-induced elastic–plastic deformations in ultra-precision diamond cutting J. Braz. Soc. Mech. Sci. Eng. 41 369

[17] [17] FangZ,Yan YD,LiZH,ZhangAXandGengYQ2023 Molecular dynamics simulation of the tool geometry effect on nanowire formation behavior during nanoskiving Mater. Des. 225 111498

[18] [18] Ding X, Jarfors A E W, Lim G C, Shaw K C, Liu Y C and Tang L J 2012 A study of the cutting performance of poly-crystalline oxygen free copper with single crystalline diamond micro-tools Precis. Eng. 36 141–52

[19] [19] Lee W B, Wang H, Chan C Y and To S 2013 Finite element modelling of shear angle and cutting force variation induced by material anisotropy in ultra-precision diamond turning Int. J. Mach. Tools Manuf. 75 82–86

[20] [20] Yu J C, Wang G and Rong Y M 2015 Experimental study on the surface integrity and chip formation in the micro cutting process Proc. Manuf. 1 655–62

[21] [21] Sharma A, Datta D and Balasubramaniam R 2018 Molecular dynamics simulation to investigate the orientation effects on nanoscale cutting of single crystal copper Comput. Mater. Sci. 153 241–50

[22] [22] Wang Z F, Zhang J J, Zhang J G, Li G, Zhang H J, Hassan H, Hartmaier A, Yan Y D and Sun T 2020 Towards an understanding of grain boundary step in diamond cutting of polycrystalline copper J. Mater. Process. Technol. 276 116400

[23] [23] WangZF, ZhangJJ,LiG,XuZW, ZhangHJ,ZhangJG, Hartmaier A, Fang F Z, Yan Y D and Sun T 2020 Anisotropy-related machining characteristics in ultra-precision diamond cutting of crystalline copper Nanomanuf. Metrol. 3 123–32

[24] [24] He C L and Zong W J 2019 Diffraction effect and its elimination method for diamond-turned optics Opt. Express 27 1326–44

[25] [25] Huang W H and Yan J W 2020 Surface formation mechanism in ultraprecision diamond turning of coarse-grained polycrystalline ZnSe Int. J. Mach. Tools Manuf. 153 103554

[26] [26] Liu S Q, Zhang H J, Zhao L, Li G, Zhang C Y, Zhang J J and Sun T 2021 Coupled thermo-mechanical sticking-sliding friction model along tool-chip interface in diamond cutting of copper J. Manuf. Process. 70 578–92

[27] [27] LuSJ,LiZQ,ZhangJJ,ZhangJG,WangXH,Yan YD and Sun T 2020 Finite element investigation of the influence of SiC particle distribution on diamond cutting of SiCp/Al composites Nanomanuf. Metrol. 3 251–9

[28] [28] Han L, Zhang J J, Liu Y, Gu Q M and Li Z Q 2021 Finite element investigation on pretreatment temperature-dependent orthogonal cutting of unidirectional CFRP Compos. Struct. 278 114678

[29] [29] Davim J P 2002 Diamond tool performance in machining metal–matrix composites J. Mater. Process. Technol. 128 100–5

[30] [30] Chan K C, Cheung C F, Ramesh M V, Lee W B and To S 2001 A theoretical and experimental investigation of surface generation in diamond turning of an Al6061/SiCp metal matrix composite Int. J. Mech. Sci. 43 2047–68

[31] [31] Davim J P and Mata F 2005 Optimisation of surface roughness on turning fibre-reinforced plastics (FRPs) with diamond cutting tools Int. J. Adv. Manuf. Technol. 26 319–23

[32] [32] Wang J J, Liao W H and Guo P 2020 Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2D combined resonant and non-resonant vibrations Int. J. Mech. Sci. 170 105347

[33] [33] Zhang X Q, Deng H and Liu K 2019 Oxygen-shielded ultrasonic vibration cutting to suppress the chemical wear of diamond tools CIRP Ann. 68 69–72

[34] [34] Zhang X Q, Liu K, Kumar A S and Rahman M 2014 A study of the diamond tool wear suppression mechanism in vibration-assisted machining of steel J. Mater. Process. Technol. 214 496–506

[35] [35] Huang K, Shen Z F, Zheng Z D, Lin C T, Huang W Q, Zhang J G,Chen X, Xiao J F and Xu JF 2022 Investigation on the machinability of nitriding mold steel by applying in-situ laser assisted diamond cutting J. Manuf. Process. 84 149–61

[36] [36] La Monaca A, Axinte D A, Liao Z R, M’Saoubi R and Hardy M C 2022 Temperature-dependent shear localisation and microstructural evolution in machining of nickel-base superalloys Mater. Des. 219 110792

[37] [37] GuoYJ,YangXJ,KangJ,LiMZ,XieQM, XiaoJGand Zhang W Q 2021 Experimental investigations on the laser-assisted machining of single crystal Si for optimal machining Opt. Laser Technol. 141 107113

[38] [38] Lee Y J, Chaudhari A, Zhang J and Wang H 2019 Thermally assisted microcutting of calcium fluoride single crystals Simulation and Experiments of Material-Oriented Ultra-Precision Machining ed J J Zhang, B Guo and J G Zhang (Singapore: Springer) pp 77–102

[39] [39] RaoXS,ZhangFH,LuoXC,DingF, CaiYK,SunJNand Liu H T 2019 Material removal mode and friction behaviour of RB-SiC ceramics during scratching at elevated temperatures J. Eur. Ceram. Soc. 39 3534–45

[40] [40] LiuCL,ChenX,Ke JY, SheZD,ZhangJG,XiaoJFand Xu J F 2021 Numerical investigation on subsurface damage in nanometric cutting of single-crystal silicon at elevated temperatures J. Manuf. Process. 68 1060–71

[41] [41] Zhao L, Zhang J G, Fu Y F, Zhang J J, Hartmaier A and Sun T 2022 Thermal softening-suppressed inter-granular embrittlement of polycrystalline 3C-SiC under diamond cutting Mater. Des. 223 111250

[42] [42] Chavoshi S Z and Luo X C 2016 Molecular dynamics simulation study of deformation mechanisms in 3C–SiC during nanometric cutting at elevated temperatures Mater. Sci. Eng. A 654 400–17

[43] [43] Wang J S, Zhang X D, Fang F Z and Chen R T 2019 Diamond cutting of micro-structure array on brittle material assisted by multi-ion implantation Int. J. Mach. Tools Manuf. 137 58–66

[44] [44] Wang J S, Fang F Z and Zhang X D 2015 An experimental study of cutting performance on monocrystalline germanium after ion implantation Precis. Eng. 39 220–3

[45] [45] Tanaka H and Shimada S 2013 Damage-free machining of monocrystalline silicon carbide CIRP Ann. 62 55–58

[46] [46] To S, Wang H and Jelenkovi′c E V 2013 Enhancement of the machinability of silicon by hydrogen ion implantation for ultra-precision micro-cutting Int. J. Mach. Tools Manuf. 74 50–55

[47] [47] Liu B, Xu Z W, Wang Y, Gao X and Kong R J 2020 Effect of ion implantation on material removal mechanism of 6H-SiC in nano-cutting: a molecular dynamics study Comput. Mater. Sci. 174 109476

[48] [48] Chavoshi S Z, Goel S and Luo X C 2016 Molecular dynamics simulation investigation on the plastic flow behaviour of silicon during nanometric cutting Model. Simul. Mater. Sci. Eng. 24 015002

[49] [49] Zhang S, Qi Y Z and Chen J Y 2023 Brittle.ductile transition behavior of 6H-SiC in oblique diamond cutting Int. J. Mech. Sci. 246 108155

[50] [50] ZhangL,ZhaoHW, DaiL,YangYH,DuXC,TangPY and Zhang L 2015 Molecular dynamics simulation of deformation accumulation in repeated nanometric cutting on single-crystal copper RSC Adv. 5 12678–85

[51] [51] Celik F A 2022 Molecular dynamics study of crystal lattice effect on mechanical properties of SiO2: a density functional tight binding investigation Vacuum 203 111305

[52] [52] Lu M, Wang F, Zeng X G, Chen W J and Zhang J Q 2020 Cohesive zone modeling for crack propagation in polycrystalline NiTi alloys using molecular dynamics Theor. Appl. Fract. Mech. 105 102402

[53] [53] Liang X L, Liu Z Q, Wang B and Hou X 2018 Modeling of plastic deformation induced by thermo-mechanical stresses considering tool flank wear in high-speed machining Ti-6Al-4V Int. J. Mech. Sci. 140 1–12

[54] [54] Yan J W, Zhang Z Y and Kuriyagawa T 2009 Mechanism for material removal in diamond turning of reaction-bonded silicon carbide Int. J. Mach. Tools Manuf. 49 366–74

[55] [55] Yan J W, Syoji K and Tamaki J 2003 Some observations on the wear of diamond tools in ultra-precision cutting of single-crystal silicon Wear 255 1380–7

[56] [56] Mohammadi H, Ravindra D, Kode S K and Patten J A 2015 Experimental work on micro laser-assisted diamond turning of silicon (111) J. Manuf. Process. 19 125–8

[57] [57] Goel S et al 2020 Horizons of modern molecular dynamics simulation in digitalized solid freeform fabrication with advanced materials Mater. Today Chem. 18 100356

[58] [58] ZhangJ,OuyangQB,GuoQ,LiZQ,Fan GL,SuYS, Jiang L, Lavernia E J, Schoenung J M and Zhang D 2016 3D microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites Compos. Sci. Technol. 123 1–9

[59] [59] Inamura T, Shishikura Y and Takezawa N 2009 Digital microscope observation of the initial stage of cutting monocrystalline silicon CIRP Ann. 58 69–72

[60] [60] Wang Z F et al 2019 Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper J. Manuf. Process. 38 187–95

[61] [61] Belak J F and Stowers I F 1990 A molecular dynamics model of the orthogonal cutting process Proc. 1990 ASPE Annual Conf. (Rochester, NY, USA)

[62] [62] Wang P C, Yu J G and Zhang Q X 2020 Nano-cutting mechanical properties and microstructure evolution mechanism of amorphous/single crystal alloy interface Comput. Mater. Sci. 184 109915

[63] [63] Vardanyan V H, Zhang Z B, Alhafez I A and Urbassek H M 2020 Cutting of Al/Si bilayer systems: molecular dynamics study of twinning, phase transformation, and cracking Int. J. Adv. Manuf. Technol. 107 1297–307

[64] [64] Xu F F, Fang F Z and Zhang X D 2017 Hard particle effect on surface generation in nano-cutting Appl. Surf. Sci. 425 1020–7

[65] [65] Pachaury Y and Shin Y C 2019 Assessment of sub-surface damage during machining of additively manufactured Fe-TiC metal matrix composites J. Mater. Process. Technol. 266 173–83

[66] [66] Gao J, Luo X C, Fang F Z and Sun J N 2022 Fundamentals of atomic and close-to-atomic scale manufacturing: a review Int. J. Extrem. Manuf. 4 012001

[67] [67] Papanikolaou M and Salonitis K 2021 Grain size effects on nanocutting behaviour modelling based on molecular dynamics simulations Appl. Surf. Sci. 540 148291

[68] [68] ZhaoPY, Wu JW, ChenHF, LiuH,LiDandTan JB2021 Molecular dynamics simulation study of interaction mechanism between grain boundaries and subgrain boundaries in nano-cutting J. Manuf. Process. 67 418–26

[69] [69] Liu Q, Roy A, Tamura S, Matsumura T and Silberschmidt V V 2016 Micro-cutting of single-crystal metal: finite-element analysis of deformation and material removal Int. J. Mech. Sci. 118 135–43

[70] [70] Demiral M, Roy A, Sayed T E and Silberschmidt V V 2014 Numerical modelling of micro-machining of f.c.c. single crystal: influence of strain gradients Comput. Mater. Sci. 94 273–8

[71] [71] Qiu S, Zhang C Y, Zhao L, Lu S J, Li G, Zhang J J, Song C W and Zhang H J 2022 Finite element simulation and experimental investigation of crystallographic orientation-dependent residual stress in diamond cutting of polycrystalline aluminum Proc. Inst. Mech. Eng. C 237 1178–89

[72] [72] Wang Z F et al 2020 Crystal anisotropy-dependent shear angle variation in orthogonal cutting of single crystalline copper Precis. Eng. 63 41–48

[73] [73] Brinksmeier E, Preuss W, Riemer O and Rentsch R 2017 Cutting forces, tool wear and surface finish in high speed diamond machining Precis. Eng. 49 293–304

[74] [74] Liu D H, Wang G, Yu J C and Rong Y 2017 Molecular dynamics simulation on formation mechanism of grain boundary steps in micro-cutting of polycrystalline copper Comput. Mater. Sci. 126 418–25

[75] [75] Li X, Shi Z Y, Duan N M, Cui P, Zhang S and Zhang X Z 2020 Cutting performance investigation based on the variable friction model by considering sliding velocity and limiting stress Proc. Inst. Mech. Eng. B 234 1113–23

[76] [76] Zong W J, Li D, Cheng K, Sun T and Liang Y C 2007 Finite element optimization of diamond tool geometry and cutting-process parameters based on surface residual stresses Int. J. Adv. Manuf. Technol. 32 666–74

[77] [77] Sun Z W, To S and Wang S J 2019 An analytical force model for ultra-precision diamond sculpturing of micro-grooves with textured surfaces Int. J. Mech. Sci. 160 129–39

[78] [78] Arrazola P J and .zel T 2010 Investigations on the effects of friction modeling in finite element simulation of machining Int. J. Mech. Sci. 52 31–42

[79] [79] Narulkar R, Bukkapatnam S, Raff L M and Komanduri R 2009 Graphitization as a precursor to wear of diamond in machining pure iron: a molecular dynamics investigation Comput. Mater. Sci. 45 358–66

[80] [80] Zhang Y J, Dong G J and Zhou M 2016 Simulation and experiment analysis on thermal deformation of tool system in single-point diamond turning of aluminum alloy J. Cent. South Univ. 23 2223–9

[81] [81] Zou L, Yin J C, Huang Y and Zhou M 2018 Essential causes for tool wear of single crystal diamond in ultra-precision cutting of ferrous metals Diam. Relat. Mater. 86 29–40

[82] [82] Rosenkranz A, Costa H L, Baykara M Z and Martini A 2021 Synergetic effects of surface texturing and solid lubricants to tailor friction and wear-a review Tribol. Int. 155 106792

[83] [83] Yan XT, JinYK,ChenXM,ZhangC,HaoCLand Wang Z K 2020 Nature-inspired surface topography: design and function Sci. China 63 224601

[84] [84] Costa H L, Schille J and Rosenkranz A 2022 Tailored surface textures to increase friction—a review Friction 10 1285–304

[85] [85] Rosenkranz A and Marian M 2022 Combining surface textures and MXene coatings—towards enhanced wear-resistance and durability Surf. Topogr. Metrol. Prop. 10 033001

[86] [86] HaoXQ,CuiW, LiL,LiHL,KhanAMandHeN2018 Cutting performance of textured polycrystalline diamond tools with composite lyophilic/lyophobic wettabilities J. Mater. Process. Tech. 260 1–8

[87] [87] Kumar S, Tong Z and Jiang X Q 2022 Advances in the design and manufacturing of novel freeform optics Int. J. Extrem. Manuf. 4 032004

[88] [88] Joya Y F, Yan B, James K, Yue L Y, Middleburgh S C and Wang Z B 2021 Ultrafast femtosecond laser micro-marking of single-crystal natural diamond by two-lens focusing system Mater. Today Commun. 26 101800

[89] [89] Nolasco L K, Couto F A, Andrade M B and Mendon.aCR 2023 Femtosecond laser micromachining study with multiple wavelengths in CVD diamond Diam. Relat. Mater. 131 109589

[90] [90] Ali B, Litvinyuk I V and Rybachuk M 2021 Femtosecond laser micromachining of diamond: current research status, applications and challenges Carbon 179 209–26

[91] [91] WangQW, YangY, Yao P, ZhangZY, Yu SM,ZhuHTand Huang C Z 2021 Friction and cutting characteristics of micro-textured diamond tools fabricated with femtosecond laser Tribol. Int. 154 106720

[92] [92] DaiHF, ChenGY, LiSB,FangQHandHuB2017 Influence of laser nanostructured diamond tools on the cutting behavior of silicon by molecular dynamics simulation RSC Adv. 7 15596–612

[93] [93] Dai H F, Zhou Y Q and Zhang F 2020 Atomistic simulation of influence of laser nano-structured diamond abrasive on the polishing behavior of silicon Mater. Sci. Semicond. Process. 105 104706

[94] [94] Fan PF, DingF, LuoXC,Yan YD,GengYQand Wang Y Z 2020 A simulated investigation of ductile response of GaAs in single-point diamond turning and experimental validation Nanomanuf. Metrol. 3 239–50

[95] [95] Fan PF, GoelS,LuoXC,Yan YD,GengYQandHeY 2021 Origins of ductile plasticity in a polycrystalline gallium arsenide during scratching: MD simulation study Appl. Surf. Sci. 552 149489

[96] [96] Meng B B, Zhang Y and Zhang F H 2016 Material removal mechanism of 6H-SiC studied by nano-scratching with Berkovich indenter Appl. Phys. A 122 247

[97] [97] Zhang S, Cheng X and Chen J Y 2022 Surface deformation, phase transition and dislocation mechanisms of single crystalline 6H-SiC in oblique nano-cutting Appl. Surf. Sci. 588 152944

[98] [98] Lai M, Zhang X D, Fang F Z, Wang Y F, Feng M and Tian W H 2013 Study on nanometric cutting of germanium by molecular dynamics simulation Nanoscale Res. Lett. 8 13

[99] [99] Wang Y Q, Tang S and Guo J 2020 Molecular dynamics study on deformation behaviour of monocrystalline GaN during nano abrasive machining Appl. Surf. Sci. 510 145492

[100] [100] Song J, Zhou H, Xu Y M, Jiang W and Zhang C W 2022 Molecular dynamics simulation and experimental investigation on deformation anisotropy of gallium nitride Ga-plane and N-plane nano-scratching Solid State Commun. 353 114866

[101] [101] Li C, Piao Y, Meng B B, Zhang Y, Li L Q and Zhang F H 2022 Anisotropy dependence of material removal and deformation mechanisms during nanoscratch of gallium nitride single crystals on (0001) plane Appl. Surf. Sci. 578 152028

[102] [102] Wang J S, Fang F Z, Yan G P and Guo Y B 2019 Study on diamond cutting of ion implanted tungsten carbide with and without ultrasonic vibration Nanomanuf. Metrol. 2 177–85

[103] [103] Bulla B, Klocke F and Dambon O 2012 Analysis on ductile mode processing of binderless, nano crystalline tungsten carbide through ultra precision diamond turning J. Mater. Process. Technol. 212 1022–9

[104] [104] Liu K and Li X P 2001 Ductile cutting of tungsten carbide J. Mater. Process. Technol. 113 348–54

[105] [105] ZhangGQ,HanJH,ChenYB,WangJPandWangHT 2022 Brittle-ductile transition and nano-surface generation in diamond turning of single-crystal germanium J. Manuf. Process. 82 628–45

[106] [106] Lai M, Zhang X D, Fang F Z and Bi M H 2019 Effects of crystallographic orientation and negative rake angle on the brittle-ductile transition and subsurface deformation in machining of monocrystalline germanium Precis. Eng. 56 164–71

[107] [107] Goel S, Luo X C, Agrawal A and Reuben R L 2015 Diamond machining of silicon: a review of advances in molecular dynamics simulation Int. J. Mach. Tools Manuf. 88 131–64

[108] [108] ChenX,LiuCL,Ke JY, ZhangJG,ShuXWandXuJF 2020 Subsurface damage and phase transformation in laser-assisted nanometric cutting of single crystal silicon Mater. Des. 190 108524

[109] [109] LiuCL,ChuJN,ChenX,XiaoJFandXuJF2020 Molecular dynamics simulation on structure evolution of silica glass in nano-cutting at high temperature Mol. Simul. 46 957–65

[110] [110] GuoXG,ZhaiCH,KangRKandJinZJ2015The mechanical properties of the scratched surface for silica glass by molecular dynamics simulation J. Non-Cryst. Solids 420 1–6

[111] [111] Chen C H, Lai M and Fang F Z 2021 Study on the crack formation mechanism in nano-cutting of gallium arsenide Appl. Surf. Sci. 540 148322

[112] [112] Wang J S and Fang F Z 2021 Nanometric cutting mechanism of silicon carbide CIRP Ann. 70 29–32

[113] [113] CaoZH,YangH,SunSL,LiuYH,ZhangMandDaiXJ 2020 Study on the influence of anisotropy of ZnGeP2 single crystal on its surface cutting quality Opt. Mater. 110 110383

[114] [114] Liu C L, To S, Sheng X X and Xu J F 2023 Molecular dynamics simulation on crystal defects of single-crystal silicon during elliptical vibration cutting Int. J. Mech. Sci. 244 108072

[115] [115] Wu Z H, Zhang L C and Liu W D 2021 Structural anisotropy effect on the nanoscratching of monocrystalline 6H-silicon carbide Wear 476 203677

[116] [116] Goel S, Stukowski A, Luo X C, Agrawal A and Reuben R L 2013 Anisotropy of single-crystal 3C–SiC during nanometric cutting Model. Simul. Mater. Sci. Eng. 21 065004

[117] [117] Goel S, Kovalchenko A, Stukowski A and Cross G 2016 Influence of microstructure on the cutting behaviour of silicon Acta Mater. 105 464–78

[118] [118] Yan J W and Okuuchi T 2019 Chip morphology and surface integrity in ultraprecision cutting of yttria-stabilized tetragonal zirconia polycrystal CIRP Ann. 68 53–56

[119] [119] Zhang S and Zong W J 2021 FE-SPH hybrid method to simulate the effect of tool inclination angle in oblique diamond cutting of KDP crystal Int. J. Mech. Sci. 196 106271

[120] [120] Zhang S, Zhang H J and Zong W J 2019 Modeling and simulation on the effect of tool rake angle in diamond turning of KDP crystal J. Mater. Process. Technol. 273 116259

[121] [121] Kalkhoran S N A, Vahdati M and Yan J W 2020 Effect of relative tool sharpness on subsurface damage and material recovery in nanometric cutting of mono-crystalline silicon: a molecular dynamics approach Mater. Sci. Semicond. Process. 108 104868

[122] [122] Liu B, Xu Z W, Chen C, Pang K, Wang Y and Ruan Q H 2019 Effect of tool edge radius on material removal mechanism of single-crystal silicon: numerical and experimental study Comput. Mater. Sci. 163 127–33

[123] [123] Heidari M, Akbari J and Yan J W 2019 Effects of tool rake angle and tool nose radius on surface quality of ultraprecision diamond-turned porous silicon J. Manuf. Process. 37 321–31

[124] [124] Alam M, Zhao L, Vajragupta N, Zhang J J and Hartmaier A 2021 Finite element modeling of brittle and ductile modes in cutting of 3C-SiC Crystals 11 1286

[125] [125] ZhangJJ,HanL,ZhangJG,LiG,XuJF, Yan YDand Sun T 2019 Finite element analysis of the effect of tool rake angle on brittle-to-ductile transition in diamond cutting of silicon Int. J. Adv. Manuf. Technol. 104 881–91

[126] [126] LuSJ,LiZQ,ZhangJJ,ZhangCY, LiG,ZhangHJand Sun T 2022 Coupled effect of tool geometry and tool-particle position on diamond cutting of SiCp/Al J. Mater. Process. Technol. 303 117510

[127] [127] Han L, Zhang J J, Liu Y and Sun T 2021 Effect of fiber orientation on depth sensing intra-laminar failure of unidirectional CFRP under nano-scratching Composites B 224 109211

[128] [128] Wu Q, Xu W X and Zhang L C 2019 Machining of particulate-reinforced metal matrix composites: an investigation into the chip formation and subsurface damage J. Mater. Process. Technol. 274 116315

[129] [129] Xu J, Deng Y, Wang C X and Liang G Q 2021 Numerical model of unidirectional CFRP in machining: development of an amended friction model Compos. Struct. 256 113075

[130] [130] Liu J W, Cheng K, Ding H, Chen S J and Zhao L 2018 Simulation study of the influence of cutting speed and tool–particle interaction location on surface formation mechanism in micromachining SiCp/Al composites Proc. Inst. Mech. Eng. C 232 2044–56

[131] [131] DuJC,ZhangHZ,HeWB,MaJ,MingWYandCaoY 2019 Simulation and experimental study on surface formation mechanism in machining of SiCp/Al composites Appl. Compos. Mater. 26 29–40

[132] [132] LuSJ,ZhangJJ,LiZQ,ZhangJG,WangXH, Hartmaier A, Xu J F, Yan Y D and Sun T 2021 Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cutting Chin. J. Aeronaut. 34 241–52

[133] [133] LiHN,WangJP, Wu CQ,ZhaoYJ,XuJ,LiuXLand Zhu W Q 2020 Damage behaviors of unidirectional CFRP in orthogonal cutting: a comparison between single-and multiple-pass strategies Composites B 185 107774

[134] [134] Han L, Zhang J J and Sun T 2022 Tailoring fiber arrangement in subsurface damage layer of unidirectional CFRP composites by reverse multi-pass cutting Compos. Sci. Technol. 227 109571

[135] [135] WangJJ,YangY,ZhuZW, WangYK,LiaoWHandGuoP 2020 On ductile-regime elliptical vibration cutting of silicon with identifying the lower bound of practicable nominal cutting velocity J. Mater. Process. Technol. 283 116720

[136] [136] Zhang J G, Zhang J J, Rosenkranz A, Suzuki N and Shamoto E 2019 Frictional properties of surface textures fabricated on hardened steel by elliptical vibration diamond cutting Precis. Eng. 59 66–72

[137] [137] Zhang J J, Zhang J G, Rosenkranz A, Zhao X L and Song Y L 2018 Surface textures fabricated by laser surface texturing and diamond cutting—influence of texture depth on friction and wear Adv. Eng. Mater. 20 1700995

[138] [138] Zhang J G, Rosenkranz A, Zhang J J, Guo J, Li X Q, Chen X, Xiao J F and Xu J F 2022 Modified wettability of micro-structured steel surfaces fabricated by elliptical vibration diamond cutting Int. J. Precis. Eng. Manuf. Green Technol. 9 1387–97

[139] [139] Lu Y X, Wang B, Mu Q, Yang K, Li H, Rosenkranz A, Jiang N and Zhou P 2022 Nanoscale smooth and damage-free polycrystalline diamond surface ground by coarse diamond grinding wheel Diam. Relat. Mater. 125 108971

[140] [140] Chen W Q, Zheng L, Teng X Y, Yang K and Huo D H 2018 Cutting mechanism investigation in vibration-assisted machining Nanomanuf. Metrol. 1 268–76

[141] [141] Klocke F, Heselhaus M and Puellen J 2005 Ultrasonic assisted diamond turning of hardened steel alloys Proc. Int. Conf. Eur. Soc. Precis. Eng. Nanotechnol. vol 2 pp 517–20

[142] [142] Zou L and Zhou M 2013 Finite element analysis of ultrasonic vibration assisted turning of ferrous metals Key Eng. Mater. 567 33–38

[143] [143] Zou L, Huang Y, Zhou M and Duan L 2017 Investigation on diamond tool wear in ultrasonic vibration-assisted turning die steels Mater. Manuf. Process. 32 1505–11

[144] [144] Zhang J G, Suzuki N, Wang Y L and Shamoto E 2014 Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond J. Mater. Process. Technol. 214 2644–59

[145] [145] Dai H F, Chen J J and Liu G J 2019 A numerical study on subsurface quality and material removal during ultrasonic vibration assisted cutting of monocrystalline silicon by molecular dynamics simulation Mater. Res. Express 6 065908

[146] [146] Liu C L, Zhang J G, Zhang J J, Chu J N, Chen X, Xiao J F and Xu J F 2021 Numerical investigation on material removal mechanism in elliptical vibration cutting of single-crystal silicon Mater. Sci. Semicond. Process. 134 106019

[147] [147] LiuCL,ZhangJG,ZhangJJ,ChenX,XiaoJFandXuJF 2020 A simulation investigation on elliptical vibration cutting of single-crystal silicon Int. J. Adv. Manuf. Technol. 108 2231–43

[148] [148] Zhu B, Zhao D, Zhao H W, Guan J, Hou P L, Wang S B and Qian L 2017 A study on the surface quality and brittle–ductile transition during the elliptical vibration-assisted nanocutting process on monocrystalline silicon via molecular dynamic simulations RSC Adv. 7 4179–89

[149] [149] Zhao L, Zhang J J, Zhang J G and Hartmaier A 2021 Atomistic investigation of machinability of monocrystalline 3C–SiC in elliptical vibration-assisted diamond cutting Ceram. Int. 47 2358–66

[150] [150] ZhangJJ,HanL,ZhangJG,LiuHY, Yan YDandSunT 2019 Brittle-to-ductile transition in elliptical vibration-assisted diamond cutting of reaction-bonded silicon carbide J. Manuf. Process. 45 670–81

[151] [151] Park S S, Wei Y and Jin X L 2018 Direct laser assisted machining with a sapphire tool for bulk metallic glass CIRP Ann. 67 193–6

[152] [152] You K Y, Yan G P, Luo X C, Gilchrist M D and Fang F Z 2020 Advances in laser assisted machining of hard and brittle materials J. Manuf. Process. 58 677–92

[153] [153] Langan S M, Ravindra D and Mann A B 2018 Process parameter effects on residual stress and phase purity after microlaser-assisted machining of silicon Mater. Manuf. Process. 33 1578–86

[154] [154] Shahinian H, Di K, Navare J, Bodlapati C, Zaytsev D and Ravindra D 2020 Ultraprecision laser-assisted diamond machining of single crystal Ge Precis. Eng. 65 149–55

[155] [155] You K Y and Fang F Z 2022 High effective laser assisted diamond turning of binderless tungsten carbide J. Mater. Process. Technol. 302 117505

[156] [156] You K Y, Fang F Z and Yan G P 2021 Surface generation of tungsten carbide in laser-assisted diamond turning Int. J. Mach. Tools Manuf. 168 103770

[157] [157] LiC,HuYX,ZhangFH,GengYQandMengBB2023 Molecular dynamics simulation of laser assisted grinding of GaN crystals Int. J. Mech. Sci. 239 107856

[158] [158] Chavoshi S Z, Goel S and Luo X C 2016 Influence of temperature on the anisotropic cutting behaviour of single crystal silicon: a molecular dynamics simulation investigation J. Manuf. Process. 23 201–10

[159] [159] FangFZ,ChenYH,ZhangXD,HuXTandZhangGX 2011 Nanometric cutting of single crystal silicon surfaces modified by ion implantation CIRP Ann. 60 527–30

[160] [160] FangFZ,LaiM,WangJS,LuoXC,Yan JWandYan YD 2022 Nanometric cutting: mechanisms, practices and future perspectives Int. J. Mach. Tools Manuf. 178 103905

[161] [161] Wang J S, Chen R T, Zhang X D and Fang F Z 2018 Study on machinability of silicon irradiated by swift ions Precis. Eng. 51 577–81

[162] [162] Wang J S, Fang F Z and Zhang X D 2017 Nanometric cutting of silicon with an amorphous-crystalline layered structure: a molecular dynamics study Nanoscale Res. Lett. 12 41

[163] [163] Wang J S, Zhang X D and Fang F Z 2016 Molecular dynamics study on nanometric cutting of ion implanted silicon Comput. Mater. Sci. 117 240–50

[164] [164] DaiHF, HuY, Wu WL,Yue HX,MengXS,LiPand Duan H G 2021 Molecular dynamics simulation of ultra-precision machining 3C-SiC assisted by ion implantation J. Manuf. Process. 69 398–411

[165] [165] Fan YX,XuZW, SongY, DongB,XueZF, LiuB,LiuL and Tian D Y 2021 Nano material removal mechanism of 4H-SiC in ion implantation-assisted machining Comput. Mater. Sci. 200 110837