[1] [1] TIAN H Y, CUI Z Y, MA H, et al. Corrosion evolution and stress corrosion cracking behavior of a low carbon bainite steel in the marine environments: Effect of the marine zones[J]. Corros Sci, 2022, 206: 110490.

[2] [2] HOU B R, LI X G, MA X M, et al. The cost of corrosion in China[J]. NPJ Mater Degrad, 2017, 1: 4.

[4] [4] SRENSEN P A, KIIL S, DAM-JOHANSEN K, et al. Anticorrosive coatings: A review[J]. J Coat Technol Res, 2009, 6(2): 135-176.

[9] [9] ZAVAREH, AKHTARI M, et al. Analysis of corrosion protection behavior of Al2O3-TiO2 oxide ceramic coating on carbon steel pipes for petroleum industry[J]. Ceram Int, 2018, 44(6): 5967-5975.

[10] [10] ZHOU F F, WANG S, XU B S, et al. Nanomechanical properties of plasma-sprayed nanostructured and conventional 8YSZ thermal barrier coatings[J]. Ceram Int, 2022, 48(24): 37483-37487.

[11] [11] DUDAS A, LAKI G, NAGY A L, et al. Wear behaviour of ceramic particle reinforced atmospheric plasma spray coatings on the cylinder running surface of internal combustion engines[J]. Wear, 2022: 502-503.

[12] [12] ZHANG K C, ZHOU Z H, DENG Y, et al. Protection performance of plasma sprayed Al2O3-13% TiO2 coating sealed with an organic-inorganic hybrid agent[J]. J Wuhan Univ Techno Mater Sci Ed, 2022, 37(3): 331-335.

[14] [14] DAI K Y, LI S L, HU P Y, et al. Effect of outer rust layer on cathodic protection and corrosion behavior of high-strength wire hangers with sheath crack in marine rainfall environment[J]. Case Stud Constr Mater, 2023, 18: e02043.

[15] [15] GAO Y L, XIAO Z X, LIU B X, et al. Effect of addition of alumina and rare-earth oxide particles on the corrosion resistance and mechanism of low carbon low alloy steel[J]. Materials Research Express, 2023, 10(4): 046520.

[19] [19] ZHANG L M, MA A L, HU H X, et al. Effect of microalloying with Ti or Cr on the corrosion behavior of Al-Ni-Y amorphous alloys[J]. Corrosion, 2018, 74(1): 66-74.

[20] [20] BIJALWAN P, KUMAR A, NAYAK S K, et al. Microstructure and corrosion behavior of Fe-based amorphous composite coatings developed by atmospheric plasma spraying[J]. J Alloys Compd, 2019, 796: 47-54.

[22] [22] WANG Z, ZHANG J, ZHANG H, et al. Fabrication and corrosion resistance of plasma-sprayed glass-powder-doped Al2O3-13% TiO2 Coatings[J]. J Therm Spray Tech, 2020, 29: 500-509.

[23] [23] BANSAL P, PADTURE N P, VASILIEV A. Improved interfacial mechanical properties of Al2O3-13% TiO2 plasma-sprayed coatings derived from nanocrystalline powders[J]. Acta Mater, 2003, 51(10): 2959-2970.

[25] [25] YANG K, CHEN J, HAO F, et al. Stress-induced phase transformation and amorphous-to-nanocrystalline transition in plasma-sprayed Al2O3 coating with relative low temperature heat treatment[J]. Surf Coat Technol, 2014, 253: 277-283.

[26] [26] NGA P T H, NGUYEN V T. Microstructure and micro-hardness of Al2O3-TiO2 coating by plasma spraying on SKD61 steel[J]. Mater Trans, 2020, 61(9): 1829-1832.