[1] Wei D Q, Liu K, Wang R. Research on the microstructure and hardness of transformation hardening of 45 steel during electron beam scanning[J]. Journal of Mechanical Engineering, 48, 127-132(2012).

[2] Cai W, Meng F N, Gao X Y et al. Effect of QPQ nitriding time on wear and corrosion behavior of 45 carbon steel[J]. Applied Surface Science, 261, 411-414(2012). http://www.sciencedirect.com/science/article/pii/S016943321201392X

[3] Wu G L, Ren F C, Yao J H et al. Abrasion resistance mechanism of new Co-based alloy by diode laser cladding[J]. Chinese Journal of Lasers, 44, 0602006(2017).

[4] Hemmati I. Ocelík V, deHosson J T M. Dilution effects in laser cladding of Ni-Cr-B-Si-C hardfacing alloys[J]. Materials Letters, 84, 69-72(2012).

[5] Lu Y Z, Huang G K, Wang Y Z et al. Crack-free Fe-based amorphous coating synthesized by laser cladding[J]. Materials Letters, 210, 46-50(2018).

[6] Feng H, Li J F, Sun J. Study on remanufacturing repair of damaged crank shaft journal surface by laser cladding[J]. Chinese Journal of Lasers, 41, 0803003(2014).

[7] Han Y Y, Lu J J, Li J F et al. Lathe spindle remanufacturing based on laser cladding technology[J]. China Surface Engineering, 28, 147-153(2015).

[8] Liu H L, Dang S E, Liu J S. Effect of quenching temperature on ferrite content of 1Cr13 martensitic stainless steel[J]. Heat Treatment of Metals, 41, 33-36(2016).

[9] Xu H F, Xiao J K, Zhang G et al. Progress of thermal sprayed NiCrBSi based wear-resistant coatings[J]. Surface Technology, 45, 109-117, 174(2016).

[10] Zhang W H[M]. Stainless steel and its heat treatment(2010).

[11] Yan X L, Dong S Y, Xu B S et al[J]. Analysis of microstructure distribution and defect generation mechanism of the laser cladding layer with Fe901 alloy powder Manufacturing Technology & Machine Tool, 2013, 115-118.

[12] Dong S Y, Yan S X, Xu B S et al. Processing optimization and properties of laser cladding Fe90 coating[J]. Functional Material, 42, 15-18(2011).

[13] Hemmati I. Ocelík V, de Hosson J T M. Microstructural characterization of AISI 431 martensitic stainless steel laser-deposited coatings[J]. Journal of Materials Science, 46, 3405-3414(2011).

[14] Wang H Y, Cui C Y, Zhou J. Microstructure and properties of cobalt-based alloy coating on tool steel surface prepared by laser cladding[J]. Journal of Jilin University (Engineering and Technology Edition), 40, 1000-1004(2010).

[15] Ren C, Li Z G, Shu D et al. Microstructure and water erosion resistance property of stellite6 coating by laser cladding on 17-4PH stainless steel surface[J]. Chinese Journal of Lasers, 44, 0402010(2017).

[16] Leiro A, Kankanala A, Vuorinen E et al. Tribological behaviour of carbide-free bainitic steel under dry rolling/sliding conditions[J]. Wear, 273, 2-8(2011). http://www.sciencedirect.com/science/article/pii/S0043164811002122

[17] Wen S Z, Huang P[M]. Principles of tribology, 10(2012).

[18] Ma H S, Liang G X, Lü M et al. Investigation on friction and wear behavior of AISI 4340 steel in dry sliding condition[J]. Tribology, 38, 59-66(2018).

[19] Zhong A W, Yao P P, Xiao Y L et al. Tribological behaviors and reliability life of Cu-based sintered materials for space applications in air[J]. Tribology, 37, 686-694(2017).

[20] Wang W, Cui H Z, Wang Z N et al. Microstructure and wear mechanism of induction quenching 50CrMo4 steel[J]. Transactions of Materials and Heat Treatment, 36, 62-68(2015).