[1] [1] WANG R, XU S, LI W, et al. Optical fiber current sensor research: review and outlook［J］. Optical and Quantum Electronics, 2016, 48(9):442.

[2] [2] QI X, YIN X, LI G, et al. A construction method for the simulation platform for the analysis of the current transformer［J］. Power System Protection and Control, 2015, 43(22):69-76.

[3] [3] LI Y, ZHANG W, LIU X, et al. Characteristic analysis and experiment of adaptive fiber optic current sensor technology［J］. Applied Sciences, 2019, 9(2):333.

[4] [4] BOHNERT K, BRANDLE H, BRUNZEL M G, et al. Highly accurate fiber-optic DC current sensor for the electrowinning industry［J］. IEEE Transactions on Industry Applications, 2007, 43(1):180-187.

[5] [5] WANG Y L, KANG M H, REN L Y, et al. Design of spun high-birefringent fiber for fiber optic current sensor［J］. Infrared and Laser Engineering, 2015, 44(1):170-175(in Chinese).

[6] [6] HUANG J, WANG J. Key technology of optical current transformer［J］. Electric Power Automation Equipment, 2009, 29(12):94-97.

[7] [7] MADDEN W L, MICHIE W C, CRUDEN A, et al. Temperature compensation for optical current sensors［J］. Optical Engineering, 1999, 38(10):1699-1707.

[8] [8] TANG D, ROSE A H, DAY G W, et al. Annealing of linear birefringence in single-mode fiber coils: Application to optical fiber current sensors［J］. Journal of Lightwave Technology, 1991, 9(8): 1031-1037.

[9] [9] ULRICH R, SIMON A. Polarization optics of twisted single-mode fibers［J］. Applied Optics, 1979, 18(13):2241-2251.

[10] [10] LI Zh Y, MENG Y Ch, HAO X Y. Spun high birefringence all-fiber current transfroms［J］. Laser & Optoelectronics Progress, 2017, 54(2):020601 (in Chinese).

[11] [11] DREXLER P, FIALA P. Utilization of faraday mirror in fiber optic current sensors［J］. Radio Engineering, 2008, 17(4):101-107.

[12] [12] SILVA R M, MARTINS H, NASCIMENTO I, et al. Optical current sensors for high power systems: A review［J］. Applied Sciences, 2012, 2(3):602-628.

[13] [13] NING Y N, WANG Z P, PALMER A W, et al. Recent progress in optical current sensing techniques［J］. Review of Scientific Instruments, 1995, 66(5):3097-3111.

[14] [14] PAPP A, HARMS H. Magnetooptical current transformer 1: Principles［J］. Applied Optics, 1980, 19(22): 3729-3734.

[15] [15] YANG X Y, LIAO Y B, WU G Sh, et al. Analysis of detection system of fiber current sensors［J］. Chinese Journal of Lasers, 1987, 14(5):312-316(in Chinese).

[16] [16] ZHANG H. Research on all-fiber current sensor based on loop archcture［D］. Fuzhou: Fujian Normal University, 2014:13-39 (in Ch-inese).

[17] [17] WU J, ZHANG X. Recent progress of all fiber optic current transformers ［J/OL］. (2020-09-25) ［2021-05-19］. https://ieeexplore.ieee.org/document/9356627.

[18] [18] BLAKE J N, TANTASWADI P, CARVALHO R. All-fiber in-line Sagnac interferometer current sensor［J/OL］. (1995-01-01) ［2021-5-19］. https://www.ixueshu.com/document/352f8fc78d19f5773 18947a18e7f9386.html.

[19] [19] BLAKE J, TANTASWADI P. In-line Sagnac interferometer current sensor［J］. IEEE Transactions on Power Delivery, 1996, 11(1):116-121.

[20] [20] WANG Zh, CHU F H, WU J P. Progress in all-fiber current sensor temperature compensation［J］. Laser & Optoelectronics Progress, 2014, 51(12):120005 (in Chinese).

[21] [21] WANG X X, WANG Y, QIN Y, et al. Ratio error of all fiber optical current transformer caused by mean wavelength’s fluctuation［J］. Infrared and Laser Engineering, 2015, 44(1):233-238(in Chin-ese).

[22] [22] MOHR F. Thermo-optically induced bias drift in fiber optical Sagnac interferometers［J］. Journal of Lightwave Technology, 2002, 14(1):27-41.

[23] [23] WANG X X, ZHANG Ch X, ZHANG Ch Y, et al. Research on temperature characteristic of quarter-waveplate and its effect on fiber optical current transformers［J］. Laser & Infrared, 2006, 36(7):596-598 (in Chinese).

[24] [24] HE Ch G, ZHANG Y J, LIU G H, et al. Design and experimental study on temperature control circuit of semiconductor laser［J］. Electronic Measurement Technology, 2017, 40(8):27-31 (in Chin-ese).

[25] [25] XIANG X, YIN W, HUANG J. A practical design of an analog thermal-control circuit［J］. Electronic Science and Technology, 2014, 27(4):124-127 (in Chinese).

[26] [26] GAO H, WANG G, GAO W, et al. A chiral photonic crystal fiber sensing coil for decreasing the polarization error in a fiber optic cu-rrent sensor［J］. Optics Communications, 2020, 469:125755.

[27] [27] YANG H, QIAO L, YANG Y, et al. Thermally induced error analysis and suppression of optic fiber delay loop in the different variable rate of temperature［J］. Optik, 2019, 193:1-15.

[28] [28] MULLER G M, FRANK A, YANG L, et al. Temperature compensation of interferometric and polarimetric fiber-optic current sensors with spun highly birefringent fiber［J］. Journal of Lightwave Technology, 2019, 37(18):4507-4513.

[29] [29] HU H, HUANG J, XIA L, et al. The compensation of long-term temperature induced error in the all fiber current transformer through optimizing initial phase delay in λ/4 wave-plate［J］. Microwave and Optical Technology Letters, 2019, 61(7):1769-1773.

[30] [30] MULLER G M, FRANK A, YANG L, et al. Temperature compensation of interferometric and polarimetric fiber-optic current sensors with spun highly birefringent fiber［J］. Journal of Lightwave Technology, 2019, 37(18):4507-4513.

[31] [31] QIAN Sh T, LIAO Q Y, ZHANG Y R, et al. Design of doped double-core photonic crystal fiber sound pressure sensor with high sensitivity［J］. Laser Technology, 2020, 44(5): 605-610 (in Chin-ese).

[32] [32] YANG H R, HUANG W L, JIANG Sh X, et al. Temperature independent polarization-maintaining photonic crystal fiber with regular pentagon air hole distribution［J］. Optik, 2019, 185:390-396.

[33] [33] WANG L L, ZHAO X H, XIAO H, et al. Research on temperature compensation algorithm of fiber optic current sensor［J］. Electro-Optic Technology Application, 2019, 34(1):25-30 (in Chinese).

[34] [34] TEMKINA V, MEDVEDEV A, MAYZEL A, et al. Compensation of fiber quarter-wave plate temperature deviation in fiber optic current sensor ［J/OL］. (2019-10-17) ［2021-05-19］. https://ieee-xplore.ieee.org/docu-ment/8906876.

[35] [35] XU Z, XU Q, CHEN X, et al. A linear optical current transducer based on crystal wedge imaging detection［J］. IEEE Sensors Journal, 2017, 17(23):7894-7900.

[36] [36] ZHANG H. High temperature and vibration robustness all-fiber cu-rrent sensor with a fiber-loop architecture and reflection scheme［J］. IEEE Photonics Journal, 2017, 9(3):1-8.

[37] [37] ZHANG H, JIANG J, ZHANG Y, et al. A loop all-fiber current sensor based on single-polarization single-mode couplers［J］. Sensors, 2017, 17(11):2674.

[38] [38] TAO Y M, DU J B, MA L, et al. High sensitivity fiber optic current sensor based on recirculating loop［J］. Optical Communication Technology, 2016, 40(9): 30-32 (in Chinese).

[39] [39] BOHNERT K, FRANK A, YANG L, et al. Polarimetric fiber-optic current sensor with integrated-optic polarization splitter［J］. Journal of Lightwave Technology, 2019, 37(14): 3672-3678.

[40] [40] BOHNERT K, HSU C P, YANG L, et al. Fiber-optic current sensor tolerant to imperfections of polarization-maintaining fiber connectors［J］. Journal of Lightwave Technology, 2018, 36(11): 2161-2165.

[41] [41] SIMA W X, WANG Y, YANG M, et al. A fiber-optic current sensor coupled with a Faraday rotator［J］. Proceedings of the CSEE, 2020, 40(8): 2670-2680(in Chinese).