[1] Ma W K, Yang X Y, Wang J. Power regulation methods and regulation characteristics of the space reactor direct Brayton cycle with helium-xenon working fluid[J]. Energy, 313, 134012(2024).

[2] Yu D L, Liu J, Hu C J et al. Key features and highly effective prediction of complete startup from frozen state for high-temperature heat pipe in heat pipe reactor[J]. Applied Thermal Engineering, 236, 121766(2024).

[3] WU Pan, OUYANG Zeyu, ZHU Yu et al. Validation of an in-house system analysis code for heat pipe cooled reactor[J]. Nuclear Techniques, 46, 110603(2023).

[4] LIU Songtao, YUAN Yuan, WEI Zonglan et al. Accident analysis of heat pipe cooled space reactor system[J]. Nuclear Power Engineering, 37, 119-124(2016).

[5] Kapernick R J, Guffee R M. Thermal stress calculations for heatpipe-cooled reactor power systems[C](2002).

[6] WANG Ao, SHEN Fengyang, HU Gu et al. A survey of heatpipe space nuclear reactor power supply[J]. Nuclear Techniques, 43, 060002(2020).

[7] YANG Xuan, LI Quan, LI Chenxi et al. Coupled irradiation-thermal-mechanical analysis of fuel in solid core of heat pipe cooled reactor[J]. Nuclear Techniques, 47, 070601(2024).

[8] LIU Bo, LIU Limin, DING Guanqun et al. Transient analysis on the thermal-mechanical characteristics of a heat pipe cooled reactor core[J]. Nuclear Techniques, 45, 080602(2022).

[9] McClure Patrick R, Poston David I, Marc Gibson et al. Kilopower space reactor concept-reactor materials study[R](2014).

[10] Lee D H, Bang I C. Experimental investigation of thermal behavior of overfilled sodium heat pipe[J]. International Journal of Heat and Mass Transfer, 215, 124449(2023).

[11] DENG Daiying, CHEN Siyuan, AI Bangcheng et al. Calculation investigation of high-temperature heat pipe startup of sharp leading edge[J]. Acta Aerodynamica Sinica, 34, 646-651(2016).

[12] ZHAO Weilin, ZHUANG Jun, ZHANG Hong. Influences of the evaporator length and liquid-filled content on the startup operation of the high temperature sodium heat pipes[J]. Chemical Engineering & Machinery, 30, 259-262(2003).

[13] Ma Y G, Yu H X, Huang S F et al. Effect of inclination angle on the startup of a frozen sodium heat pipe[J]. Applied Thermal Engineering, 201, 117625(2022).

[14] Tian Z X, Liu X, Wang C L et al. Experimental investigation on the heat transfer performance of high-temperature potassium heat pipe for nuclear reactor[J]. Nuclear Engineering and Design, 378, 111182(2021).

[15] Guo H, Guo Q, Yan X K et al. Experimental investigation on heat transfer performance of high-temperature thermosyphon charged with sodium-potassium alloy[J]. Applied Thermal Engineering, 139, 402-408(2018).

[16] Cisterna L H R, Cardoso M C K, Fronza E L et al. Operation regimes and heat transfer coefficients in sodium two-phase thermosyphons[J]. International Journal of Heat and Mass Transfer, 152, 119555(2020).

[17] Zhang H Z, Ye F, Guo H et al. Sodium-potassium alloy heat pipe under geyser boiling experimental study: heat transfer analysis[J]. Energies, 14, 7582(2021).

[18] Mantelli M B H, Uhlmann T, Cisterna L H R et al. Experimental study of a sodium two-phase thermosyphon[C](2017).

[19] Cisterna L H R, Milanez F H, Mantelli M B H. Prediction of geyser boiling limit for high temperature two-phase thermosyphons[J]. International Journal of Heat and Mass Transfer, 165, 120656(2021).

[20] Wang X Y, Wang Y F, Chen H J et al. A combined CFD/visualization investigation of heat transfer behaviors during geyser boiling in two-phase closed thermosyphon[J]. International Journal of Heat and Mass Transfer, 121, 703-714(2018).

[21] Wang D H, Hong F J. Numerical investigation on the geyser boiling in high temperature wick sodium heat pipe based on CFD method[C](2022).

[22] Vieira G C, Flórez M J P, Mantelli M B H. Improving heat transfer and eliminating Geyser boiling in loop thermosyphons: Model and experimentation[J]. International Journal of Heat and Mass Transfer, 156, 119832(2020).

[23] Cao Y D, Faghri A. Transient two-dimensional compressible analysis for high-temperature heat pipes with pulsed heat input[J]. Numerical Heat Transfer Part A - Applications, 18, 483-502(1990).

[24] Lee H H[M]. Finite element simulations with ANSYS Workbench 2022: theory, applications, case studies(2022).

[25] Liu J, Yu D L, Chen G et al. Numerical analysis of transient heat and mass transfer for a water heat pipe under non-uniform heating conditions[J]. Annals of Nuclear Energy, 193, 110036(2023).

[26] Liu J, Jiang X C, Ali Shah S W et al. Numerical model development for the transient heat and mass transfer performance of a water-copper wicked heat pipe[C](2022).

[27] Liu J, Yu D L, Ali Shah S W et al. Research on key factors and mechanisms influencing geyser boiling in sodium heat pipes using a novel multiphase model[J]. Nuclear Engineering and Design, 432, 113795(2025).

[28] Brackbill J U, Kothe D B, Zemach C. A continuum method for modeling surface tension[J]. Journal of Computational Physics, 100, 335-354(1992).

[29] Bader M, Busse C A. Wetting by sodium at high temperatures in pure vapour atmosphere[J]. Journal of Nuclear Materials, 67, 295-300(1977).

[30] Ma Z Y, Zhang L T, Sun W et al. Evaluation of the models and parameter effects of wall nucleation of liquid sodium[J]. Progress in Nuclear Energy, 161, 104728(2023).

[31] Lee W H. A pressure iteration scheme for two-phase flow modeling[M]. Computational Methods for Two-Phase Flow and Particle Transport, 61-82(2013).

[32] Schrage R W[M]. A theoretical study of interphase mass transfer(1953).

[33] Wang E P, Li L. Numerical analysis of high temperature potassium heat pipe under marine condition[J]. International Communications in Heat and Mass Transfer, 147, 106978(2023).

[34] Wang X E, Shi Y W, Liu T C et al. CFD modeling of liquid-metal heat pipe and hydrogen inactivation simulation[J]. International Journal of Heat and Mass Transfer, 199, 123490(2022).

[35] QIU Guodong, CAI Weihua, WU Zhiyong et al. Analysis on the value of coefficient of mass transfer with phase change in Lee's equation[J]. Journal of Harbin Institute of Technology, 46, 15-19(2014).

[36] Hsu Y Y. On the size range of active nucleation cavities on a heating surface[J]. Journal of Heat Transfer, 84, 207-213(1962).

[37] TU Zhengkai, LIU Wei, HUANG Xiaoming et al. Phase change model and driving mechanism for capillary evaporating interface[J]. Journal of Huazhong University of Science and Technology (Nature Science Edition), 36, 96-98, 102(2008).

[38] Zudin Y B[M]. Non-equilibrium Evaporation and condensation processes: analytical solutions, 320(2021).

[39] Kim Y, Choi J, Kim S et al. Effects of mass transfer time relaxation parameters on condensation in a thermosyphon[J]. Journal of Mechanical Science and Technology, 29, 5497-5505(2015).

[40] Xu Z, Zhang Y N, Li B X et al. Modeling the phase change process for a two-phase closed thermosyphon by considering transient mass transfer time relaxation parameter[J]. International Journal of Heat and Mass Transfer, 101, 614-619(2016).