[1] Gao L, Zhang H X, Xu W et al. Optimal design of connecting rod of gear-linked cylinders hydraulic engine[J]. Shandong Industrial Technology, 2016, 73.

[2] Zhang X M. Main defects of connecting rod fracture splitting and calculation method of the allowable size[D](2014).

[3] Hu X D, Li Y L, Bai S Z et al. Research progress of laser application in material removal[J]. Laser & Optoelectronics Progress, 58, 0500008(2021).

[4] Sun F, Song Y Y, Zhao Q L et al. Influence of off-axis amount on dynamics performance of gas in laser cutting process[J]. Chinese Journal of Lasers, 47, 0402003(2020).

[5] Kou S Q, Jin W M, Gu Z W et al. The new technology and developing trend of IC engine connecting rod manufacturing[J]. Chinese Internal Combustion Engine Engineering, 22, 28-31(2001).

[6] Gu Y S. Processing techniques development of today's automobile engine[J]. Design and Manufacture of Diesel Engine, 6, 36-41,29(2000).

[7] Zhao Y. Study on parameters of connecting rod fracture splitting based on fracture after small scale yielding and its application[D](2011).

[8] Yang Q T. Multi-scale simulation study on propagation of connecting rod crack by wire cut electrical discharge machining[D](2016).

[9] Wang J W. Numerical simulation and experimental study on pulsed laser processing fracture splitting notch of con-rod/crankcase bearing block[D](2011).

[10] Zheng Q F. Research on laser processing fracture splitting groove technology and automation equipment for engine connecting rod[D](2010).

[11] Zheng L M. Research on key technologies and equipment development of engine connecting rod fracture splitting[D](2012).

[12] Zhang C. Study on key technology and equipment of machining 36MnVS4 splitting connecting rod with pulse fiber laser[D](2018).

[13] Zhang X C, Qian J, Liu J et al. Recent process in laser processing of fiber-reinforced composites[J]. Laser & Optoelectronics Progress, 57, 111432(2020).

[14] Zheng Q F, Yang S H, Deng C P et al. Manufacture of connecting-rod initial splitting notch by Nd∶YAG solid laser[J]. Optics and Precision Engineering, 18, 142-148(2010).

[15] Yilbas B S. Laser cutting quality assessment and thermal efficiency analysis[J]. Journal of Materials Processing Technology, 155/156, 2106-2115(2004).

[16] Loisos G, Moses A J. Effect of mechanical and Nd∶YAG laser cutting on magnetic flux distribution near the cut edge of non-oriented steels[J]. Journal of Materials Processing Technology, 161, 151-155(2005).

[17] Usov S V, Minaev I V. High-power impulse YAG laser system for cutting, welding and perforating of super hard materials[J]. Journal of Materials Processing Technology, 149, 541-545(2004).

[18] Ghany K A, Newishy M. Cutting of 1.2 mm thick austenitic stainless steel sheet using pulsed and CW Nd∶YAG laser[J]. Journal of Materials Processing Technology, 168, 438-447(2005).

[19] Yasuo M, Sigeo O. Machining apparatus for forming cracking slot for connecting rod[P].

[20] Song W F. Performance comparison and notch parameter selection on con-rod fracture splitting machining of 36MnVS4 and C70S6[D](2017).

[21] Xia S. Development of inverted duplex station equipment for the wire electrical discharge machining of connecting rod fracture splitting groove[D](2018).

[22] Duerr U. Laser machining method for forming an incipient crack zone, for fracture separation of a component, in particular a connecting rod for an internal combustion engine and laser installation[P].

[23] Gu Z, Yang S, Ku S et al. Fracture splitting technology of automobile engine connecting rod[J]. The International Journal of Advanced Manufacturing Technology, 25, 883-887(2005).

[24] Kou S Q, Yang S H, Zhao Y. Laser processing method for connecting rod splitting groove and its equipment[P].

[25] Wang G, Li Z P. Device in car connecting rod schizolysis groove is cut to one--way vertical type laser[P].

[26] Wang G, Li Z P, Wei H Y et al. Device and method for unidirectional vertical laser cutting of automobile connecting rod fracture splitting notches[P].

[27] Wang G, Li Z P, Guan L et al. Connecting rod visual auxiliary locating laser groove cutting device and control method[P].

[28] Wang G, Zhang C, Chen L Y et al. Laser head protection device for machining connecting rod cracking grooves and protection method[P].

[29] Wang G, Li Z P, Guan L et al. Laser processing rotating disc clamp device used for connecting rod fracture splitting groove[P].

[30] Wang G, Li Z P, Deng Y et al. Laser machining clamp device of connecting rod fracture splitting groove[P].

[31] Chen J M, Zuo T C. Effect of laser beam incident angle on laser cutting quality[J]. Chinese Journal of Lasers, 28, 1037-1040(2001).

[32] Li Z P. Study on the optical fiber laser processing technology of the initial cracking groove of the engine connecting-rod[D](2018).

[33] Wang C H. Research on the equipment and processing technology of vertical pulse fiber laser machining Splitting connecting rod with duplex processing area[D](2020).

[34] Kou S Q, Wang J W, Zheng Q F. Numerical analysis of the temperature field generated during the production of a fracture notch in a C70S6 steel connecting rod using a Nd∶YAG laser[J]. Lasers in Engineering, 21, 115-127(2011).

[35] Gao W Q. Modeling and simulation of fluid field and temperature field coupling system of laser grooving[D](2015).