[1] Qian G, Feng Y, Zhang X B et al. Review on research of Cu-based self-lubricating electrical contact composites[J]. Surface Technology, 45, 7-12(2016).

[2] Han C S, Guo T M, Nan X L et al. New research progress in Cu-based composites[J]. Materials Review, 26, 90-94(2012).

[3] Xie K, Zhang H, Zhang S Q. Manufacture technology of rare earth oxides dispersion strengthened Cu-based composite[J]. Hot Working Technology, 45, 25-29(2016).

[4] Lungu M V, Barbu A. Graphene and its derivative reinforced tungsten-copper composites for electrical contact applications: a review[J]. Journal of Reinforced Plastics and Composites, 41, 624-636(2022).

[5] Tao J M, Hong P, Chen X F et al. Research progress on carbon nanotubes reinforced Cu-matrix composites[J]. Journal of Materials Engineering, 45, 128-136(2017).

[6] Liu W X, Jiang X S, Shao Z Y et al. A review on nanocarbon-reinforced Cu-matrix nanocomposites with high mechanical strengths[J]. Current Nanoscience, 13, 410-420(2017).

[7] Yi J H, Bao R, Li C J et al. Research progress of CNTs reinforced Cu/Al matrix composites[J]. The Chinese Journal of Nonferrous Metals, 25, 1209-1219(2015).

[8] Sun W, Chu X, Lan H M et al. Current implementation status of cold spray technology: a short review[J]. Journal of Thermal Spray Technology, 31, 848-865(2022).

[9] Yang J W, Li W Y, Xing C H et al. Research progress in cold spraying of copper coating[J]. Materials Protection, 55, 58-70(2022).

[10] Liao T Y, Biesiekieski A, Berndt C C et al. Multifunctional cold spray coatings for biological and biomedical applications: a review[J]. Progress in Surface Science, 97, 100654(2022).

[11] Kwon S H, Park D Y, Lee D Y et al. A study on the microstructure and physical properties of cold sprayed Cu/CNT composite coating[J]. Journal of the Korean Institute of Metals and Materials, 46, 182-188(2008).

[12] Cho S, Takagi K, Kwon H et al. Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process[J]. Surface and Coatings Technology, 206, 3488-3494(2012).

[13] Pialago E J T, Kwon O K, Kim M S et al. Ternary Cu-CNT-AlN composite coatings consolidated by cold spray deposition of mechanically alloyed powders[J]. Journal of Alloys and Compounds, 650, 199-209(2015).

[14] Pialago E J T, Kwon O K, Park C W et al. Cold spray deposition of mechanically alloyed ternary Cu-CNT-SiC composite powders[J]. Ceramics International, 41, 6764-6775(2015).

[15] Choi J, Okimura N, Yanada T et al. Deposition of graphene-copper composite film by cold spray from particles with graphene grown on copper particles[J]. Diamond and Related Materials, 116, 108384(2021).

[16] Chen W Y, Yu Y, Cheng J et al. Microstructure, mechanical properties and dry sliding wear behavior of Cu-Al2O3-graphite solid-lubricating coatings deposited by low-pressure cold spraying[J]. Journal of Thermal Spray Technology, 27, 1652-1663(2018).

[17] Yin S, Xie Y C, Cizek J et al. Advanced diamond-reinforced metal matrix composites via cold spray: properties and deposition mechanism[J]. Composites Part B: Engineering, 113, 44-54(2017).

[18] Aldwell B, Yin S, McDonnell K A et al. A novel method for metal-diamond composite coating deposition with cold spray and formation mechanism[J]. Scripta Materialia, 115, 10-13(2016).

[19] Yang L J, Fu S R, Wang S P et al. Deposition characteristics of Al-Al2O3 composite coating prepared by low pressure cold spraying at different carrier gas temperatures[J]. Materials Protection, 55, 71-77(2022).

[20] Li W B, Wu H J, Verdy C et al. Study of low-pressure cold spray additive manufacturing: investigation of kinematic spray parameters on deposition and properties[J]. 3D Printing and Additive Manufacturing, 0260(2022).

[21] Moreno-Murguia B, Mora-Garcia A G, Canales-Siller H et al. Influence of stand-off distance and pressure in copper coatings deposition efficiency and particle velocity[J]. Surface and Coatings Technology, 430, 127986(2022).

[22] Zarazua-Villalobos L, Mary N, Bernard C et al. Improved deposition efficiency of low-pressure cold-sprayed tin coating through powder recycling[J]. Journal of Thermal Spray Technology, 31, 2577-2593(2022).

[23] Jibran W, Hogan J, McDonald A. Towards optimization of thickness, hardness, and porosity of low-pressure cold sprayed WC-Ni coatings[J]. The International Journal of Advanced Manufacturing Technology, 116, 2149-2160(2021).

[24] Mohankumar A, Duraisamy T, Sampathkumar D et al. Optimization of cold spray process inputs to minimize porosity and maximize hardness of metal matrix composite coatings on AZ31B magnesium alloy[J]. Journal of Nanomaterials, 2022, 7900150(2022).

[25] Zhang Z C, Liu Z Q, Ge H et al. The fabrication of porous metal-bonded diamond coatings based on low-pressure cold spraying and Ni-Al diffusion-reaction[J]. Materials, 15, 2234(2022).

[26] Yang L J, Li Z X, Huang C L et al. Producing hard material coatings by laser-assisted cold spray: a technological review[J]. Materials Review, 32, 412-417(2018).

[27] Li W Y, Cao C C, Wang G Q et al. ‘Cold spray +’ as a new hybrid additive manufacturing technology: a literature review[J]. Science and Technology of Welding & Joining, 24, 1-26(2019).

[28] Olakanmi E O, Doyoyo M. Laser-assisted cold-sprayed corrosion- and wear-resistant coatings: a review[J]. Journal of Thermal Spray Technology, 23, 765-785(2014).

[29] Yao J H, Wu L J, Li B et al. Research states and development tendency of supersonic laser deposition technology[J]. Chinese Journal of Lasers, 46, 0300001(2019).

[30] Zhang C, Zhang D B, Luo C et al. Nanosecond-pulse laser assisted cold spraying of Al-Cu aluminum alloy[J]. Coatings, 11, 267(2021).

[31] Barton D J, Bhattiprolu V S, Hornbuckle B C et al. Residual stress generation in laser-assisted cold spray deposition of oxide dispersion strengthened Fe91Ni8Zr1[J]. Journal of Thermal Spray Technology, 29, 1550-1563(2020).

[32] Nikbakht R, Cojocaru C V, Aghasibeig M et al. Cold spray and laser-assisted cold spray of CrMnCoFeNi high entropy alloy using nitrogen as the propelling gas[J]. Journal of Thermal Spray Technology, 31, 1129-1142(2022).

[33] Yao J H, Yang L J, Li B et al. Characteristics and performance of hard Ni60 alloy coating produced with supersonic laser deposition technique[J]. Materials & Design, 83, 26-35(2015).

[34] Yao J H, Li Z H, Li B et al. Characteristics and bonding behavior of Stellite 6 alloy coating processed with supersonic laser deposition[J]. Journal of Alloys and Compounds, 661, 526-534(2016).

[35] Yao J H, Yang L J, Li B et al. Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray[J]. Applied Surface Science, 330, 300-308(2015).

[36] Li B, Jin Y, Yao J H et al. Solid-state fabrication of WCp-reinforced Stellite-6 composite coatings with supersonic laser deposition[J]. Surface and Coatings Technology, 321, 386-396(2017).

[37] Jiang C W, Liu B, Zhang Y Y et al. Process optimization of CNTs/Cu composite coating prepared by laser-assisted low pressure cold spraying[J]. Laser & Optoelectronics Progress, 59, 0724001(2022).

[38] Wang J J, Tian K, Chen Z J et al. Microstructure and wear resistance of graphite/Cu composite coating prepared by supersonic laser deposition[J]. Chinese Journal of Lasers, 48, 1802015(2021).

[39] Assadi H, Gärtner F, Stoltenhoff T et al. Bonding mechanism in cold gas spraying[J]. Acta Materialia, 51, 4379-4394(2003).

[40] Yu M, Li W Y, Wang F F et al. Effect of particle and substrate preheating on particle deformation behavior in cold spraying[J]. Surface and Coatings Technology, 220, 174-178(2013).

[41] Akbarpour M R, Alipour S, Farvizi M et al. Mechanical, tribological and electrical properties of Cu-CNT composites fabricated by flake powder metallurgy method[J]. Archives of Civil and Mechanical Engineering, 19, 694-706(2019).

[42] Chen B B, Yang J, Zhang Q et al. Tribological properties of copper-based composites with copper coated NbSe2 and CNT[J]. Materials & Design, 75, 24-31(2015).