[1] [1] HUANG Zh Y. Research on manufacturing technology of stainless steel roof steel structure for urban rail passenger cars［D］. Changchun: Jilin University,2019: 21-27(in Chinese).

[2] [2] YANG L, YANG B, YANG G W, et al. Analysis of fatigue characteristics of spot welded joints of stainless steel carbody［J］. Transactions of the China Welding Institution,2020,41(7):18-24(in Chin-ese).

[3] [3] HAN X H, ZHANG Zh Y, LI G Q. Application and prospect of laser welding technology in stainless steel rail passenger car manufacturing［J］. Electirc Welding Machine, 2018,48(3):1-8(in Chinese).

[4] [4] WANG C Y, GAO X D, MA N J, et al. Magneto-optical imaging detection of laser welding defecs lander multi-directinal magnetic field excitation［J］.Laser Technology, 2020,44(5):592-599(in Chin-ese).

[5] [5] LIU L X, ZHONG Y M, MA Ch P, et al. Research on residual stress of laser welding joint of SUS301L austenitic stainless steel for subway［J］. Hot Working Technology,2013,42(13):186-188(in Chin-ese).

[6] [6] HARISH K, GANESH P, RAKESH K, et al. Laser welding of 3mm thick laser-cut AISI 304 stainless steel sheet［J］. Journal of Materials Engineering and Performance,2006,15(1):23-31.

[7] [7] TIAN M. Research on laser welding process of stainless steel for rail trains［D］. Wuhan: Huazhong University of Science and Technology, 2015:47-55(in Chinese).

[8] [8] CHEN L, ZHOU L Z, TANG Ch, et al. Study of laser butt welding of SUS301L stainless steel and welding joint analysis［J］. International Journal of Advanced Manufacturing Technology, 2014, 73(9/12):1695-1704.

[9] [9] DUAN W, ZHOU L H. Simulation study of laser welding of aluminum alloy sheet based on Simufact Welding［J］. Hot Working Technology, 2018, 47(15):168-171 (in Chinese).

[10] [10] ZHANG L J, ZHANG J X, WANG R, et al. The effect of side blowing gas on the CO2 laser welding process of stainless steel sheet［J］. Applied Laser, 2005, 25(4):217-221 (in Chinese).

[11] [11] GAN H Y. The influence of process parameters on the forming properties of laser welding of stainless steel sheet［J］.Applied Laser, 2015, 35(2):221-223(in Chinese).

[12] [12] SHU L S, WANG B, BAI H Q, et al. The influence of process parameters on laser welding deformation of 304 thin steel plate［J］. Hot Working Technology, 2019, 48(17):117-121(in Chinese).

[13] [13] WANG H X, SHI Ch Y, WANG Ch Sh, et al. Non-penetrating laser lap welding process of SUS301L stainless steel for railway passenger car［J］. Hot Working Technology, 2009, 38(19):136-139 (in Chinese).

[14] [14] BAI Ch M. Research on non-penetration laser overlap welding process of austenitic stainless steel［D］. Changchun: Changchun University of Science and Technology, 2019: 23-37 (in Chinese).

[15] [15] ZHAO X,YANG Zh B, WANG F. Process analysis and performance study of laser tailor welding of SUS 301L stainless steel［J］. Welding Technology, 2019, 48(6):43-46 (in Chinese).

[16] [16] YANG X W. Research on the influence of welding process factors on the structure and performance of laser welding joints for stainless steel rail cars［D］. Changchun: Jilin University, 2019: 29-34 (in Chinese).