[1] [1] MOORE G E. Cramming more components onto integrated circuits［J］. Proceedings of the IEEE, 1998, 86(1): 82-85.

[2] [2] KIM S, MARELLI B, BRENCKLE M A, et al. All-water-based electron-beam lithography using silk as a resist［J］. Nature Nanotechnology, 2014, 9(4): 306-310.

[3] [3] HEFLICH K, JURCZYK J, ZHANG Y, et al. Direct electron beam writing of silver-based nanostructures［J］. ACS Applied Materials & Interfaces, 2017, 9(28): 24071-24077.

[4] [4] QIU C, ZHANG Z, XIAO M, et al. Scaling carbon nanotube complementary transistors to 5-nm gate lengths［J］. Science, 2017, 355(6322): 271-276.

[5] [5] KHORASANINEJAD M, CHEN W T, DEVLIN R C, et al. Metalenses at visible wavelengths: Diffraction-limited focusing and subwavelength resolution imaging［J］. Science, 2016, 352(6290): 1190-1194.

[6] [6] FISCHER J, VON FREYMANN G, WEGENER M. The materials challenge in diffraction-unlimited direct-laser-writing optical lithography［J］. Advanced Materials, 2010, 22(32): 3578-3582.

[7] [7] YU J, HE Sh T, SONG H Y, et al. Metal nanostructured film gene-rated by femtosecond laser induced forward transfer［J］. Chinese Journal of Lasers, 2017, 44(1): 102009(in Chinese).

[8] [8] BVCKMANN T, STENGER N, KADIC M, et al. Tailored 3-D mechanical metamaterials made by dip-in direct laser writing optical lithography［J］. Advanced Materials, 2012, 24(20): 2710-2714.

[9] [9] LONG J, XIONG W, LIU Y, et al. 3-D assembly of aligned carbon nanotubes via femtosecond laser direct writing［J］. Chinese Journal of Lasers, 2017, 44(1): 102003(in Chinese).

[10] [10] BRAUN A, MAIER S A. Versatile direct laser writing lithography technique for surface enhanced infrared spectroscopy sensors［J］. ACS Sensors, 2016, 1(9): 1155-1162.

[11] [11] BAGHERI S, WEBER K, GISSIBL T, et al. Fabrication of square-centimeter plasmonic nanoantenna arrays by femtosecond direct laser writing lithography: effects of collective excitations on SEIRA enhancement［J］. ACS Photonics, 2015, 2(6): 779-786.

[12] [12] BROWN L V, YANG X, ZHAO K, et al. Fan-shaped gold nanoantennas above reflective substrates for surface-enhanced infrared absorption (SEIRA)［J］. Nano Letters, 2015, 15(2): 1272-1280.

[13] [13] CHENG F, YANG X, GAO J. Ultrasensitive detection and characterization of molecules with infrared plasmonic metamaterials［J］. Scientific Reports, 2015, 5:14327.

[14] [14] BAGHERI S, GIESSEN H, NEUBRECH F. Large-area antenna-assisted seira substrates by laser interference lithography［J］. Advanced Optical Materials, 2014, 2(11): 1050-1056.

[15] [15] CHANG Y C, LU S C, CHUNG H C, et al. High-throughput nanofabrication of infra-red and chiral metamaterials using nanospherical-lens lithography［J］. Scientific Reports, 2013, 3(3):3339.

[16] [16] ZHAO Z, CAO Y, CAI Y, et al. Oblique colloidal lithography for the fabrication of nonconcentric features［J］. ACS Nano, 2017, 11(7): 6594-6604.

[17] [17] DU K, DING J, LIU Y, et al. Stencil lithography for scalable micro-and nanomanufacturing［J］. Micromachines, 2017, 8(4): 131.

[18] [18] GUILHABERT B, MASSOUBRE D, RICHARDSON E, et al. Sub-micron lithography using InGaN micro-LEDs: mask-free fabrication of LED arrays［J］. IEEE Photonics Technology Letters, 2012, 24(24): 2221-2224.

[19] [19] MIKULICS M, HARDTDEGEN H. Nano-LED array fabrication suitable for future single photon lithography［J］. Nanotechnology, 2015, 26(18): 185302.

[20] [20] CHALLA P K, KARTANAS T, CHARMET J, et al. Microfluidic devices fabricated using fast wafer-scale LED-lithography patterning［J］. Biomicrofluidics, 2017, 11(1): 014113.

[21] [21] LIN H Y, SHER C W, HSIEH D H, et al. Optical cross-talk reduction in a quantum-dot-based full-color micro-light-emitting-diode display by a lithographic-fabricated photoresist mold［J］. Photonics Research, 2017, 5(5): 411-416.

[22] [22] MASUDA H, FUKUDA K. Ordered metal nanohole arrays made by a two-step replication of honeycomb structures of anodic alumina［J］. Science, 1995, 268(5216): 1466.

[23] [23] LEE W, PARK S J. Porous anodic aluminum oxide: anodization and templated synthesis of functional nanostructures［J］. Chemical reviews, 2014, 114(15): 7487-7556.

[24] [24] MAcFARLANE R J, LEE B, HILL H D, et al. Assembly and organization processes in DNA-directed colloidal crystallization［J］. Proceedings of the National Academy of Sciences, 2009, 106(26): 10493-10498.

[25] [25] YAN P, FEI G T, SU Y, et al. Anti-counterfeiting of one-dimensional alumina photonic crystal by creating defects［J］. Electrochemical and Solid-State Letters, 2011, 15(3): K23-K26.

[26] [26] YAO J, LIU Z, LIU Y, et al. Optical negative refraction in bulk metamaterials of nanowires［J］. Science, 2008, 321(5891): 930.

[27] [27] ZHOU L, TAN Y, WANG J, et al. 3-D self-assembly of aluminium nanoparticles for plasmon-enhanced solar desalination［J］. Nature Photonics, 2016, 10(6): 393-398.

[28] [28] CHOU S Y, KRAUSS P R, RENSTROM P J. Imprint of sub-25nm vias and trenches in polymers［J］. Applied Physics Letters, 1995, 67(21): 3114-3116.

[29] [29] KOOY N, MOHAMED K, PIN L T, et al. A review of roll-to-roll nanoimprint lithography［J］. Nanoscale Research Letters, 2014, 9(1): 320.

[30] [30] MA P, XU Z, WANG M, et al. Fast fabrication of TiO2 hard stamps for nanoimprint lithography［J］. Materials Research Bulletin, 2017, 90: 253-259.

[31] [31] JAIN A, SPANN A, COCHRANE A, et al. Fluid flow in UV nanoimprint lithography with patterned templates［J］. Microelectronic Engineering, 2017, 173: 62-70.

[32] [32] ZHANG L, ZHANG J, YUAN D, et al. Electrochemical nanoimprint lithography directly on n-type crystalline silicon (111) wafer［J］. Electrochemistry Communications, 2017, 75: 1-4.

[33] [33] MATSUI S, HIROSHIMA H, HIRAI Y, et al. Innovative UV nanoimprint lithography using a condensable alternative chlorofluorocarbon atmosphere［J］. Microelectronic Engineering, 2015, 133(C): 134-155.

[34] [34] JI R, HORNUNG M, VERSCHUUREN M A, et al. UV enhanced substrate conformal imprint lithography (UV-SCIL) technique for photonic crystals patterning in LED manufacturing［J］. Microelectronic Engineering, 2010, 87(5): 963-967.

[35] [35] TALIP N B A, HAYASHI T, TANIGUCHI J, et al. Lifetime amelioration of antireflection structure molds by means of partial-filling ultraviolet nanoimprint lithography［J］. Microelectronic Engineering, 2015, 141: 81-86.

[36] [36] MOONEN P F, VRATZOV B, SMAAL W T T, et al. Flexible thin-film transistors using multistep UV nanoimprint lithography［J］. Organic Electronics, 2012, 13(12): 3004-3013.

[37] [37] LIU Ch, JIN L D, YE A P. Progress in and prospect of microsphere optical nanoscopy［J］. Laser & Optoelectronics Progress, 2016, 53(7): 70003(in Chinese).

[38] [38] YANG H, TROUILLON R, HUSZKA G, et al. Super-resolution imaging of a dielectric microsphere is governed by the waist of its photonic nanojet［J］. Nano Letters, 2016, 16(8): 4862-4870.

[39] [39] UPPUTURI P K, KRISNAN M S, MOOTHANCHERY M, et al. Photonic nanojet engineering to achieve super-resolution in photoacoustic microscopy: a simulation study［J］. Proceedings of the SPIE,2017, 10064: 100644S

[40] [40] PISCO M, GALEOTTI F, QUERO G, et al. Nanosphere lithography for optical fiber tip nanoprobes［J］. Light: Science & Applications, 2017, 6(5): e16229.

[41] [41] JI D, LI T, FUCHS H. Nanosphere lithography for sub-10nm nanogap electrodes［J］. Advanced Electronic Materials, 2017, 3(1): 1600348.

[42] [42] CHEN Y F, XU CH, LU B R. A Super resolution nanolithography method using photon nano jetting to cause focusing effect: China, 201410722282.6［P］.2015-04-01.

[43] [43] JASCHKE M, BUTT H J. Deposition of organic material by the tip of a scanning force microscope［J］. Langmuir, 1995, 11(4): 1061-1064.

[44] [44] GARCIA R, KNOLL A W, RIEDO E. Advanced scanning probe lithography［J］. Nature Nanotechnology, 2014, 9(8): 577-587.