[1] [1] RIFFAT S B, QIU G Q. A review of state-of-the-art aerogel applications in buildings[J]. Int J Low-Carbon Tech, 2013, 8(1): 1–6.

[2] [2] TABATA M, ADACHI I, ISHII Y, et al. Development of transparent silica aerogel over a wide range of densities[J]. Nucl Instrum Meth Phys Res Sect A Accel Spectrometers Detect Assoc Equip, 2010, 623(1): 339–341.

[3] [3] LI C D, ZHANG G H, LIN L L, et al. Silica aerogels: From materials research to industrial applications[J]. Int Mater Rev, 2023, 68(7): 862–900.

[4] [4] BIN RASHID A, SHISHIR S I, MAHFUZ M A, et al. Silica aerogel: Synthesis, characterization, applications, and recent advancements[J]. Part Part Syst Charact, 2023, 40(6): 2200186.

[6] [6] ADACHI I, ISHII Y, KAWAI H, et al. Study of a silica aerogel for a Cherenkov radiator[J]. Nucl Instrum Meth Phys Res Sect A Accel Spectrometers Detect Assoc Equip, 2008, 595(1): 180–182.

[7] [7] TABATA M, ADACHI I, HATAKEYAMA Y, et al. Large-area silica aerogel for use as Cherenkov radiators with high refractive index, developed by supercritical carbon dioxide drying[J]. J Supercrit Fluids, 2016, 110: 183–192.

[8] [8] GUO X Z, ZHANG Q L, DING X G, et al. Synthesis and application of several sol–gel-derived materials via sol–gel process combining with other technologies: A review[J]. J Sol Gel Sci Technol, 2016, 79(2): 328–358.

[9] [9] TWEJ W A A, ALATTAR A M, DREXLER M, et al. Tuned optical transmittance in single-step-derived silica aerogels through pH-controlled microstructure[J]. Int Nano Lett, 2017, 7(4): 257–265.

[10] [10] SMITHA S, SHAJESH P, ARAVIND P R, et al. Effect of aging time and concentration of aging solution on the porosity characteristics of subcritically dried silica aerogels[J]. Microporous Mesoporous Mater, 2006, 91(1–3): 286–292.

[11] [11] LEI C S, LI J N, SUN C C, et al. Transparent, elastic and crack-free polymethylsilsesquioxane aerogels prepared by controllable shrinkage of the hydrogels in the aging process[J]. Microporous Mesoporous Mater, 2018, 267: 107–114.

[13] [13] CHERKASHINA K, LEBEDINETS S, POCHIVALOV A, et al. Homogeneous liquid-liquid microextraction based on primary amine phase separation: A novel approach for sample pretreatment[J]. Anal Chim Acta, 2019, 1074: 117–122.

[14] [14] OGOSHI T, CHUJO Y. Synthesis of organic–inorganic polymer hybrids utilizing amphiphilic solvent as a compatibilizer[J]. Bull Chem Soc Jpn, 2003, 76(9): 1865–1871.

[15] [15] SAKKA S. Current and future possibilities of sol-gel process[J]. Trans Indian Ceram Soc, 2005, 64(1): 13–19.

[16] [16] LUSHNIKOV A A. Exact kinetics of the sol-gel transition[J]. Phys Rev E, 2005, 71(4): 046129.

[17] [17] REN H B, ZHU J Y, BI Y T, et al. One-step fabrication of transparent hydrophobic silica aerogels via in situ surface modification in drying process[J]. J Sol Gel Sci Technol, 2016, 80(3): 635–641.

[19] [19] WAGH P B, RAO A V, HARANATH D. Influence of molar ratios of precursor, solvent and water on physical properties of citric acid catalyzed TEOS silica aerogels[J]. Mater Chem Phys, 1998, 53(1): 41–47.

[20] [20] ZHU J Y, REN H B, BI Y T. Facile fabrication of machinable low-density moisture-resistant silica aerogels[J]. J Porous Mater, 2019, 26(2): 399–407.

[21] [21] WOLF A, TERHEIDEN B, BRENDEL R. Light scattering and diffuse light propagation in sintered porous silicon[J]. J Appl Phys, 2008, 104(3): 33106–33116.