Piezoelectrics & Acoustooptics, Volume. 45, Issue 2, 320(2023)

Fabrication of 1-3 Piezocomposite and High-Frequency Medical Ultrasonic Transducer Via Soft-Mold Process

SU Yifan1, WANG Yuequn2, LI Xiaobing1, SUN Ruiyu1, TIAN Junting1, JIANG Lixin3, JIANG Zhuoyun1, and NIE Shengdong1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    References(23)

    [1] [1] MA X W,CAO W W.Single-crystal high-frequency intravascular ultrasound transducer with 40 μm axial resolution[J].IEEE T Ultrason Ferr,2020,67(4):810-816.

    [2] [2] WANG J S,CHEN M Z,ZHAO X Y,et al.Fabrication and high acoustic performance of high frequency needle ultrasound transducer with PMN-PT/epoxy 1-3 piezoelectric composite prepared by dice and fill method[J].Sens Actuator A:Phys,2021: 112528.

    [3] [3] JIAN X H,HAN Z L,LIU P B,et al.A high frequency geometric focusing transducer based on 1-3 piezocomposite for intravascular ultrasound imaging[J].Biomed Res Int,2017: 9327270.

    [4] [4] WAMPO F L H,SANGA R P L,MARECHAL P,et al.Piezocomposite transducer design and performance for high resolution ultrasound imaging transducers[J].Int J Comput Mat Sci Eng,2019,8(3):1950013.

    [5] [5] JIANG L M,CHEN R M,XING J,et al.Fabrication of a (K,Na)NbO3-based lead-free 1-3 piezocomposite for high-sensitivity ultrasonic transducers application[J].J Appl Phys,2019,125(21):214501.

    [6] [6] LI Z J,LV J B,ZHU X L,et al.Development of high frequency piezocomposite with hexagonal pillars via cold ablation process[J].Ultrasonics,2021,114:106404.

    [7] [7] MA Y L,CHENG X Y,JIANG Q H,et al.A cement-based 1-3 piezoelectric composite sensor working in d15 mode for the characterization of shear stress in civil engineering structures[J].Smart Mater Struct,2018,27(11):115013.

    [8] [8] ZHOU C M,ZHANG J L,LIU D K,et al.Novel 1-3 (K,Na)NbO3-based ceramic/epoxy composites with large thickness-mode electromechanical coupling coefficient and good temperature stability[J].Ceram Int,2021,47(4):4643-4647.

    [9] [9] WANG W,OR S W,YUE Q W,et al.Cylindrically shaped ultrasonic linear array fabricated using PIMNT/epoxy 1-3 piezoelectric composite[J].Sens Actuator A:Phys,2013,192:69-75.

    [10] [10] XU J,HAN Z L,WANG N H,et al.Micromachined high frequency 1-3 piezocomposite transducer using picosecond laser[J].IEEE T Ultrason Ferr,2021,68(6):2219-2226.

    [11] [11] LV J J,XIE X D,ZHU X,et al.Cold ablated high frequency PMN-PT/epoxy 1-3 composite transducer[J].Appl Acoust (Netherlands),2022,188:108540.

    [12] [12] GEBHARDT S,SCHONECKER A,STEINHAUSEN R,et al.Quasistatic and dynamic properties of 1-3 composites made by soft molding[J].J European Ceram Soc,2003,23(1):153-159.

    [13] [13] ZHANG S Q,LI Y X,SCHMIDT R.Modeling and simulation of macro-fiber composite layered smart structures[J].Compos Struct,2015,126:89-100.

    [14] [14] BENT A A,HAGOOD N W.Piezoelectric fiber composites with interdigitated electrodes[J].J Intell Mater Syst Struct (USA),1997,8(11):903-919.

    [15] [15] GUNTHER P A,NEUMEISTER P,NEUBERT H,et al.Development of 40 MHz ultrasonic transducers via soft mold process[J].IEEE T Ultrason Ferr,2019,66(9):1497-1503.

    [16] [16] TIAN J T,LI X B,LIANG Z,et al.Fabrication of 1-3 piezoelectric composites via modified soft mold process for 40 MHz ultrasonic medical transducers[J].Ceram Int,2022,48(3):3841-3848.

    [17] [17] BOONRUANG A,THONGCHAI T,JIANG Y,et al.Progress towards wafer-scale fabrication based on gel casting technique for 1-3 randomised piezocomposite μUS linear array[J].J European Ceram Soc,2022,42(13):5565-5574.

    [19] [19] WU H J,XUE D Z,LV D C,et al.Microstructure at morphotropic phase boundary in Pb(Mg1/3Nb2/3)O3-PbTiO3 ceramic:Coexistence of nano-scaled {110}-type rhombohedral twin and {110}-type tetragonal twin[J].J Appl Phys,2012,112(5):052004.

    [20] [20] KRIMHOLTZ R,LEEDOM D A,MATTHAEI G L.New equivalent circuits for elementary piezoelectric transducers[J].Electron Lett,1970,6(13):398-399.

    [21] [21] HAERTLING G H.Ferroelectric ceramics:History and technology[J].J Am Ceram Soc,1999,82(4):797-818.

    [23] [23] YANG X,LI Z X,FEI C L,et al.High frequency needle ultrasonic transducers based on Mn doped piezoelectric single crystal[J].J Alloy Compd,2020,832:154951.

    [24] [24] LI S B,JIANG X N,TIAN J,et al.A PMN-PT micromachined 1-3 composite circular array for IVUS[C]//New York:IEEE International Ultrasonics Symposium, 2015:1-4.

    [25] [25] CHEN Z Y,ZHENG L M,CAO W W,et al.High-frequency ultrasonic imaging with lead-free (Na,K)(Nb,Ta)O3 single crystal[J].Ultrason Imaging,2017,39(6):348-356.

    Tools

    Get Citation

    Copy Citation Text

    SU Yifan, WANG Yuequn, LI Xiaobing, SUN Ruiyu, TIAN Junting, JIANG Lixin, JIANG Zhuoyun, NIE Shengdong. Fabrication of 1-3 Piezocomposite and High-Frequency Medical Ultrasonic Transducer Via Soft-Mold Process[J]. Piezoelectrics & Acoustooptics, 2023, 45(2): 320

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Received: Sep. 15, 2022

    Accepted: --

    Published Online: Nov. 29, 2023

    The Author Email:

    DOI:10.11977/j.issn.1004-2474.2023.02.027

    Topics