[1] [1] Wang Zhihui, Wang Huaming, Liu Dong. Microstructure and mechanical properties of AF1410 ultra-high strength steel using laser additive manufacture technique［J］. Chinese J Lasers, 2016, 43(4): 0403001.

[2] [2] Yang Xiongwen, Yang Yongqiang, Liu Yang, et al. Study on dimensional accuracy of typical geometric features manufactured by selective laser melting［J］. Chinese J Lasers, 2015, 42(3): 0303004.

[3] [3] Zhang H, Zhu H H, Nie X J, et al. Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy［J］. Scripta Materialia, 2017, 134: 6-10.

[4] [4] Hu Z H, Zhu H H, Zhang H, et al. Experimental investigation on selective laser melting of 17-4PH stainless steel［J］. Optics & Laser Technology, 2017, 87: 17-25.

[5] [5] Zhang Hu, Nie Xiaojia, Zhu Haihong, et al. Study on high strength Al-Cu-Mg alloy fabricated by selective laser melting［J］. Chinese J Lasers, 2016, 43(5): 0503007.

[6] [6] Chen Hongyu, Gu Dongdong, Gu Ronghai, et al. Microstructure evolution and mechanical properties of 5CrNi4Mo die steel parts by selective laser melting additive manufacturing［J］. Chinese J Lasers, 2016, 43(2): 0203003.

[7] [7] Chen Guangxia, Zeng Xiaoyan. Comparative research on direct laser fabrication and selective laser melting［J］. Modern Manufacturing Engineering, 2010, 5: 72-75.

[8] [8] Yang Y Q, Lu J B, Luo Z Y, et al. Accuracy and density optimization in directly fabricating customized orthodontic production by selective laser melting［J］. Rapid Prototyping Journal, 2012, 18(6): 482-489.

[9] [9] Tian Zongjun, Gu Dongdong, Shen Lida, et al. Application and development of laser additive manufacturing technology in aeronautics and astronautics［J］. Aeronautical Manufacturing Technology, 2015, 480 (11): 36-42.

[10] [10] Cruz M F, Borille A V. Decision methods application to compare conventional manufacturing process with metal additive manufacturing process in the aerospace industry［J］. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39(1): 177-193.

[11] [11] Yang Xiongwen. Study on dimensional accuracy of parts manufactured by selective laser melting and its application in manufacturing non-assembly mechanisms directly［D］. Guangzhou: South China University of Technology, 2015.

[12] [12] Huang Wenpu, Yu Hanchen, Yin Jie, et al. Microstructure and mechanical properties of K4202 cast nickel base superalloy fabricated by selective laser melting［J］. Acta Metallurgica Sinica, 2016, 52(9): 1089-1095.

[13] [13] Hou Huipeng, Liang Yongchao, He Yanli, et al. Microstructural evolution and tensile property of hastelloy-X alloys produced by selective laser melting［J］. Chinese J Lasers, 2017, 44(2): 0202007.

[14] [14] Zhao Jinyan, Zhang Yongzhi, Li Dongfang, et al. Properties study of Co-Cr alloy fabricated by selective laser melting［J］. Chinese J Lasers, 2015, 42(11): 1103006.

[15] [15] Craeghs T, Clijsters S, Yasa E, et al. Determination of geometrical factors in layerwise laser melting using optical process monitoring［J］. Optics and Lasers in Engineering, 2011, 49 (12): 1440-1446.

[16] [16] Yasa E, Deckers J, Craeghs T, et al. Investigation on occurrence of elevated edges in selective laser melting［C］. International Solid Freeform Fabrication Symposium, 2009: 180-192.

[17] [17] Yang J J, Han J, Yu H C, et al. Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy［J］. Materials & Design, 2016, 110: 558-570.

[18] [18] Wang Di, Liu Ruicheng, Yang Yongqiang. Clearance design and process optimization of non-assembly mechanisms fabricated by selective laser melting［J］. Chinese J Lasers, 2014, 41(2): 0203004.

[19] [19] Mai Shuzhen, Yang Yongqiang, Wang Di. Study on surface morphology and roughness variation of NiCr alloy curved surface manufactured by selective laser melting［J］. Chinese J Lasers, 2015, 42(12): 1203004.

[20] [20] Wang Zhiying, Rao Yuchun, Liu Min. Research of test sample pretreatment technology in confocal laser scanning microscopy［J］. Journal of Anhui Agricultural Sciences, 2013, 41(26): 10602-10603.

[21] [21] Ma Kang, Zhou Qingfeng, Shi Chuanxin, et al. The progress of confocal laser scanning microscope［J］. Journal of Agriculture, 2016, 6(6): 30-35.

[22] [22] Li Jie. The analysis and research on the spot energy distribution and the center location of the laser［D］. Taiyuan: North University of China, 2015.

[23] [23] Jia Ziyang. Research of manufacturing micro-convex points on 45# steel surface by long pulse-width laser［D］. Zhenjiang: Jiangsu University, 2016.

[24] [24] Wang D, Wu S B, Fu F, et al. Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties［J］. Materials & Design, 2017, 117: 121-130.

[25] [25] Fu Yonghong, Li Chengdong, Hua Xijun, et al. Study on friction and wear properties of the laser textured mold surface with micro-convex［J］. Tribology, 2009, 29(5): 475-480.

[26] [26] Lai Peng, Zhang Qingmao. Reviews and prospects of laser texturing technology［J］. Laser & Optoelectronics Progress, 2009, 46(4): 53-59.

[27] [27] Ye Xiaohu, Chen Xi. Simulation of the fluid flow and heat transfer in laser heating melt pool using a region-dividing method［J］. Chinese J Lasers, 2002, 29(9): 855-858.

[28] [28] Yin J, Zhu H H, Ke L D, et al. A finite element model of thermal evolution in laser micro sintering［J］. The International Journal of Advanced Manufacturing Technology, 2016, 83(9/12): 1847-1859.

[29] [29] Yadroitsev I, Bertrand P, Antonenkova G, et al. Use of track/layer morphology to develop functional parts by selective laser melting［J］. Journal of Laser Applications, 2013, 25(5): 052003.

[30] [30] Yadroitsev I, Smurov I. Surface morphology in selective laser melting of metal powders［J］. Physics Procedia, 2011, 12: 264-270.

[31] [31] Zhang Jingzhou, Chang Haiping. Heat tansfer［M］. Beijing: Science Press, 2009: 21-26.

[32] [32] Sih S S, Barlow J W. Measurement and prediction of the thermal conductivity of powders at high temperatures［J］. Department of Chemical Engineering, 1994: 321-329.