[1] [1] SONG Q, GAO J S, WANG X Y, et al. Fabrication of Yb3+: Er3+ co-doped Al2O3 ridge waveguides by the dry etching［J］. Optical Engineering, 2007, 46(4): 040509.

[2] [2] DYWEL P, SKOWRON′SKI . Optical characterization of thin Al2O3 layers deposited by magnetron sputtering technique at industrial conditions for applications in glazing［J］. Materials Science-Poland, 2020, 38(1): 108-115.

[3] [3] YANG X, WOO J C, UM D S, et al. Dry etching of Al2O3Thin films in O2/BCl3/Ar inductively coupled plasma［J］. Transactions on Electrical and Electronic Materials, 2010, 11(5): 202-205.

[4] [4] DEMIRTA M, ODAC1 C, PERKGZ N K, et al. Low loss atomic layer deposited Al2O3 waveguides for applications in on-chip optical amplifiers［J］. IEEE Journal of Selected Topics in Quantum Electronics, 2018, 24(4): 1-8.

[5] [5] LIZARRAGA-MEDINA E G, CASTILLO G R, JURADO J A, et al. Optical waveguides fabricated in atomic layer deposited Al2O3 by ultrafast laser ablation［J］. Results in Optics, 2021, 2: 100060.

[6] [6] CABALLERO-ESPITIA D L, LIZARRAGA-MEDINA E G, BORBON-NUN~EZ H A, et al. Study of Al2O3 thin films by ALD using H2O and O3 as oxygen source for waveguide applications［J］. Optical Materials, 2020, 109: 110370.

[7] [7] LIN J, LEVEN A, REYES R, et al. Optical waveguide loss induced by metal cladding［J］. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2005, 23(4): 1361-1363.

[8] [8] PURNAWIRMAN, LI N X, MAGDEN E S, et al. Ultra-narrow-linewidth Al2O3: Er3+ lasers with a wavelength-insensitive waveguide design on a wafer-scale silicon nitride platform［J］. Optics Express, 2017, 25(12): 13705-13713.

[9] [9] HENDRIKS W A P M, CHANG L T, VAN EMMERIK C I, et al. Rare-earth ion doped Al2O3 for active integrated photonics［J］. Advances in Physics: X, 2021, 6(1): 1833753.

[10] [10] LOHNER T, SERNYI M, PETRIK P. Characterization of sputtered aluminum oxide films using spectroscopic ellipsometry［J］. International Journal of New Horizons in Physics, 2015, 2(1): 1-4.

[11] [11] JAMNAPARA N I, NAYAK V, AVTANI D U, et al. Al2O3 films grown by glow discharge plasma aluminising［J］. Surface Engineering, 2014, 30(7): 467-474.

[12] [12] HASSANIEN A M, ATTA A A, EL-NAHASS M M, et al. Effect of annealing temperature on structural and optical properties of gallium oxide thin films deposited by RF-sputtering［J］. Optical and Quantum Electronics, 2020, 52(4): 194.

[13] [13] DING J C, ZHANG T F, MANE R S, et al. Low-temperature deposition of nanocrystalline Al2O3 films by ion source-assisted magnetron sputtering［J］. Vacuum, 2018, 149: 284-290.

[14] [14] GARCíA-VALENZUELA J A, RIVERA R, MORALES-VILCHES A B, et al. Main properties of Al2O3 thin films deposited by magnetron sputtering of an Al2O3 ceramic target at different radio-frequency power and argon pressure and their passivation effect on p-type c-Si wafers［J］. Thin Solid Films, 2016, 619: 288-296.

[15] [15] MUTTALIB M F A, CHEN R Y, PEARCE S J, et al. Optimization of reactive-ion etching (RIE) parameters for fabrication of tantalum pentoxide (Ta2O5) waveguide using Taguchi method［J］. EPJ Web of Conferences, 2017, 162: 01003.

[16] [16] LI C D, GUO P P, HUANG W, et al. Reverse-strip-structure Ge28Sb12Se60 chalcogenide glass waveguides prepared by micro-trench filling and lift-off［J］. Journal of the Optical Society of America B, 2019, 37(1): 82.