[1] Yanase K, Noda A, Oda N et al. Characteristics of shear-mode fatigue crack growth behaviors in roll materials[J]. Procedia Structural Integrity, 19, 504-512(2019).

[2] Li H C, Jiang Z Y, Tieu K A et al. Analysis of premature failure of work rolls in a cold strip plant[J]. Wear, 263, 1442-1446(2007).

[3] Gao Y L, Tong Y, Li G H et al. Microstructure and mechanical properties of Ni-based alloy composite coating on Cr12MoV by laser cladding[J]. Coatings, 12, 1632(2022).

[4] Huang Y, Sun W L, Zhou C J et al. Planning of repair area of visual damage on component to be remanufactured by laser cladding[J]. Transactions of the China Welding Institution, 38, 51-56, 131(2017).

[5] Shrivastava A, Mukherjee S, Chakraborty S S. Addressing the challenges in remanufacturing by laser-based material deposition techniques[J]. Optics & Laser Technology, 144, 107404(2021).

[6] Wang X Y, Tong Z P, Ren X D. Study on microstructure and mechanical properties of 2A50-T6 aviation aluminum alloy repaired by laser cladding[J]. Chinese Journal of Lasers, 51, 1602204(2024).

[7] Xia G J, Yao Z H, Chen J et al. Microstructure and tensile properties of IN939 repaired zone by laser additive remanufacturing[J]. Surface Technology, 50, 277-286(2021).

[8] Cao G M. Heat treatment process for prolonging die lifespan of Cr12MoV steel[J]. Hot Working Technology, 33, 46-48(2004).

[9] Zhang W, Guo Y M, Chen Y X. Applications and future development of thermal spraying technologies for remanufacturing engineering[J]. China Surface Engineering, 24, 1-10(2011).

[10] Barzegar-Mohammadi S, Haghpanahi M, Zeinoddini M et al. Effects of TIG dressing, PWHT and temper bead techniques on microstructure and fatigue strength of fillet welded steel patch repairs: an experimental investigation[J]. Journal of Materials Research and Technology, 22, 3442-3462(2023).

[11] Pinkerton A J, Wang W, Li L. Component repair using laser direct metal deposition[J]. Proceedings of the Institution of Mechanical Engineers, 222, 827-836(2008).

[12] Saboori A, Aversa A, Marchese G et al. Application of directed energy deposition-based additive manufacturing in repair[J]. Applied Sciences, 9, 3316(2019).

[13] Lin X, Cao Y Q, Wu X Y et al. Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel[J]. Materials Science and Engineering: A, 553, 80-88(2012).

[14] Yang R R, Liu L P, Lin Y H et al. Effect of Mo and Ni on impact toughness and wear resistance of Fe90 cladding layer on Cr12MoV roller surface[J]. Chinese Journal of Lasers, 51, 2002209(2024).

[15] Wang X H, Zhang M, Qu S Y. Development and characterization of (Ti, Mo)C carbides reinforced Fe-based surface composite coating produced by laser cladding[J]. Optics and Lasers in Engineering, 48, 893-898(2010).

[16] Wo P C, Munroe P R, Jiang Z T et al. Enhancing toughness of CrN coatings by Ni addition for safety-critical applications[J]. Materials Science and Engineering: A, 596, 264-274(2014).

[17] Li J Z, Liu Y B, Sun Q J et al. Effects of laser beam wobble on weld formation characteristics, microstructure, and strength of aluminum alloy/steel joints[J]. Chinese Journal of Lasers, 47, 0402010(2020).

[18] Xu K X, Lei Z, Huang R S et al. Effects of oscillation parameters on weld formation and porosity of titanium alloy narrow-gap laser wire filling welding[J]. Chinese Journal of Lasers, 48, 0602111(2021).

[19] Liu Y H, Li Y, Zhou X Y et al. Determination of beam oscillating pattern for tailoring melt flow and microstructural characteristics of laser welded Ti-6Al-4V alloy[J]. International Journal of Thermal Sciences, 203, 109156(2024).

[20] Hagenlocher C, Sommer M, Fetzer F et al. Optimization of the solidification conditions by means of beam oscillation during laser beam welding of aluminum[J]. Materials & Design, 160, 1178-1185(2018).

[21] Wang Z M, Sun L L, Ke W C et al. Laser oscillating welding of TC31 high-temperature titanium alloy[J]. Metals, 10, 1185(2020).

[22] Zhu B H, Zhen L, Xia H B et al. Effect of the scanning path on the nanosecond pulse laser welded Al/Cu lapped joint[J]. Optics & Laser Technology, 139, 106945(2021).

[23] Choe J, Kim K T, Yu J H et al. A novel route for predicting the cracking of inoculant-added AA7075 processed via laser powder bed fusion[J]. Additive Manufacturing, 62, 103370(2023).

[24] Lau M, Morgenstern F, Hübscher R et al. Image segmentation variants for semi-automated quantitative microstructural analysis with imageJ[J]. Practical Metallography, 57, 752-775(2020).

[25] Song J F, Fan Y M, Jiao Z X et al. Simulation of SLM formation of 316L stainless steel powder and reconstruction of single-layer multi-channel morphology[J]. Chinese Journal of Lasers, 50, 1602207(2023).

[26] Cao H J, Huang R F, Yi H et al. Asymmetric molten pool morphology in wire-arc directed energy deposition: evolution mechanism and suppression strategy[J]. Additive Manufacturing, 59, 103113(2022).

[27] Zhao J Y, Wang J Y, Kang X F et al. Effect of beam oscillation and oscillating frequency induced heat accumulation on microstructure and mechanical property in laser welding of Invar alloy[J]. Optics & Laser Technology, 158, 108831(2023).

[28] Cai Y H, Wang Y X, Chen H et al. Molten pool behaviors and forming characteristics in wire-laser directed energy deposition with beam oscillation[J]. Journal of Materials Processing Technology, 326, 118326(2024).

[29] Chen S Y, Xia Y L, Liu X Y et al. Microstructure and wear resistance of tungsten-carbide-reinforced nickel copper alloy deposited by circular oscillating laser[J]. Chinese Journal of Lasers, 50, 2002103(2023).

[30] Zhang Q Y, Zhuang H S[M]. Handbook of ternary alloy phase diagram, 468-469(2011).

[31] Chen L, Mi G Y, Zhang X et al. Effects of sinusoidal oscillating laser beam on weld formation, melt flow and grain structure during aluminum alloys lap welding[J]. Journal of Materials Processing Technology, 298, 117314(2021).