[1] [1] Zhang Feng. Fabrication of large off-axis aspheric silicon carbide mirror[J]. Acta Optica Sinica, 2013, 33(s2): s222001.

[2] [2] Li Ruigang, Zheng Ligong, Zhang Feng, et al. Computer controlled manufacturing during fine grinding stage of highly steep off-axis asphere with large aperture[J]. Optics and Precision Engineering, 2007, 15(5): 633-639.

[3] [3] Zhang Feng. Fabrication of optical flat mirror with nanometer surface error[J]. Chinese Optics, 2014, 7(4): 616-621.

[4] [4] Zhang Zhiyu, Li Ruigang, Zheng Ligong, et al. Precision grinding technology for the off-axis aspherical silicon carbide mirror blank[J]. Journal of Mechanical Engineering, 2013, 49(17): 39-45.

[5] [5] Wang Xiaokun. Fabrication and testing of large aperture off-axis SiC aspheric mirror[J]. Laser & Optoelectronics Progress, 2012, 49(1): 011201.

[6] [6] Wang Xiaokun. Testing large SiC mirror by subaperture stitching interferometry[J]. Laser & Optoelectronics Progress, 2013, 50(5): 051202.

[7] [7] Xue Donglin. Manufacture and application of large aperture standard transmission spheres[J]. Chinese J Lasers, 2014, 41(6): 0616001.

[8] [8] Wendt K, Schwenke H, Wldele F, et al. Error mapping of large CMMs by sequential multi-lateration using a laser tracker[J]. Proceedings of 2nd Euspen International Conference, 2001.

[9] [9] Burge J H, Su P, Zhao C, et al. Use of a commercial laser tracker for optical alignment[C]. SPIE, 2007, 6676: 66760E.

[10] [10] Wang Xiaokun. Measurement of aspherical surfaces by laser tracker[J]. Acta Photonica Sinica, 2012, 41(4): 379-383.

[11] [11] Li Jie, Wu Fan, Wu Shibin, et al. Using a laser tracker to measure the surface of off-axis aspheric mirror during grinding[J]. Acta Optica Sinica, 2012, 32(1): 108-112.

[12] [12] Li Sen, Yan Guofeng, Liu Ning. Analysis of laser tracker coordinate measurement accuracy[J]. Beijing Surveying and Mapping, 2013(2): 15-18.

[13] [13] Zobrist T L, Burge J H, Davison W B, et al. Measurements of large optical surfaces with a laser tracker[C]. SPIE, 2008, 7018: 70183U.

[14] [14] Burge J H, Kot L B, Martin H M, et al. Alternate surface measurements for GMT primary mirror segments[C]. SPIE, 2006, 6273: 62732T.

[16] [16] Chen X J, Wang Z H, Zeng Q S. Angle measurement error and compensation for decentration rotation of circular gratings[J]. Journal of Harbin Institute of Technology (New Series), 2010, 17(4): 536-539.

[17] [17] Lu Rongsheng, Li Wanhong, Lao Dabao, et al. Angular error compensation for laser tracker[J]. Optics and Precision Engineering, 2014, 22(9): 2299-2305.

[18] [18] Li Jie. Research on laser tracker measurement of large optical surface[D]. Beijing: Graduate University of Chinese Academy of Sciences, 2012.

[19] [19] Zhao C, Burge J H. Orthonormal vector polynomials in a unit circle, Part I: Basis set derived from gradients of Zernike polynomials[J]. Optics Express, 2007, 15(26): 18014-18024.

[20] [20] Zhao C, Burge J H. Orthonormal vector polynomials in a unit circle, Part II: Completing the basis set[J]. Optics Express, 2008, 16(9): 6586-6591.