Effect of heat treatment on the microstructure and mechanical property of GX4CrNi13-4 manufactured by laser cladding

Linghuan HE; Jiamin LI; Huawei ZHANG; Juan HOU; Xinni TIAN; Aijun HUANG

doi:10.11889/j.0253-3219.2024.hjs.47.060503

NUCLEAR TECHNIQUES, Volume. 47, Issue 6, 060503(2024)

Effect of heat treatment on the microstructure and mechanical property of GX4CrNi13-4 manufactured by laser cladding

Linghuan HE¹, Jiamin LI¹, Huawei ZHANG¹, Juan HOU^1、*, Xinni TIAN^2,3,4, and Aijun HUANG^2,3

Author Affiliations

¹School of Materials and Chemistry, University of Shanghai for Science and Technology, Shanghai 200082, China

²Monash Center for Additive Manufacturing, Monash University, Notting Hill, VIC 3168, Australia

³Department of Materials Science and Engineering, Monash University, Clayton, VIC 3800, Australia

⁴Suzhou Industrial Park Monash Research Institute of Science and Technology, Suzhou 215004, China

show less

Abstract Get PDF(in Chinese)

References(26)

[1] ZHAO Yuan. The trend of nuclear energy development in the world and the strategic think of Chinese nuclear energy[J]. Areal Research and Development, 19, 42-45(2000).

[2] BAI Yunsheng, WANG Qian, LI Yanrui. The latest trend of global nuclear power development[J]. China Nuclear Industry, 25-28(2019).

[3] OUYANG Yu. Development strategy and process of world nuclear power states and nuclear power development in China[J]. China Nuclear Power, 1, 118-125(2008).

[4] ZHAO Chen, WANG Yifan, LI Siying et al. Development trend and key technologies of nuclear power in China in the future[J]. Energy and Energy Conservation, 46-49, 67(2020).

[5] ZHOU Jingyue, ZHANG Peidong, XU Yan et al. Chinese nuclear power status quo and development trends in "post fukushima era"[J]. Future and Development, 39, 42-46(2015).

[6] YU Jianfeng. China cannot develop nuclear energy without the world, the world also needs China to develop nuclear energy[J]. China Nuclear Industry, 9(2019).

[7] JIAO Dianhui. Application of stainless steel in nuclear power[J]. China Metal Bulletin, 38-39(2012).

[8] WANG Yongqiang, YANG Bin, WU Huanchun et al. Uncovered the truth of nuclear power material—materials of primary coolant pipe in nuclear power plants and their processing[J]. Metal World, 37-41(2013).

[9] CUI Dawei, QU Xuanhui, LI Ke. Research progress in high-nitrogen low-nickel austenitic stainless steels[J]. Materials Review, 19, 64-67, 71(2005).

[10] WANG Yongqiang, LI Shilei, YANG Bin et al. Research status and outlook on thermal aging of cast austenitic stainless steels used in primary coolant pipes of nuclear power plant[J]. Materials Reports, 26, 101-105, 115(2012).

[11] ZHANG Quanwen, WANG Guilan, ZHAO Xushan et al. Research on laser cladding repair technology and performance of aircraft landing gear outer cylinder[J]. Applied Laser, 42, 34-42(2022).

[12] CHEN Zhengke, ZHAN Huizhen. Electric vehicle suspension system control and laser cladding repair method for material surface cracks[J]. Applied Laser, 42, 29-35(2022).

[13] Zhang W, Shang X H, Hu M L et al. Microstructure and corrosion-wear behaviors for laser cladding repaired martensitic stainless steels using Co-based and Ni-based Powders[J]. Materials Today Communications, 35, 106287(2023).

[14] GUO Wei, ZHANG Yapu, HU Lei et al. Microstructure and mechanical properties of laser cladding 304 stainless steel[J]. Applied Laser, 39, 191-197(2019).

[15] GUO Wei, JIAN Hanhan, CHAI Rongxia et al. Numerical simulation and verification of laser cladding on 27SiMn steel surface[J]. Hot Working Technology, 45, 1-6(2016).

[16] Chen C P, Yin J, Zhu H H et al. Effect of overlap rate and pattern on residual stress in selective laser melting[J]. International Journal of Machine Tools and Manufacture, 145, 103433(2019).

[17] WANG Pei, LU Shanping, LI Dianzhong et al. Investigation on phase transformation of low carbon martensitic stainless steel ZG06Cr13Ni4Mo in tempering process with low heating rate[J]. Acta Metallurgica Sinica, 44, 681-685(2008).

[18] LU Hongjie, LIU Jianyong. Tribological properties of hot forging die flux cored wire cladding layer by arc additive manufacturing[J]. Journal of Netshape Forming Engineering, 15, 127-135(2023).

[19] Guo Y B, Li Z G, Yao C W et al. Microstructure evolution of Fe-based nanostructured bainite coating by laser cladding[J]. Materials & Design, 63, 100-108(2014).

[20] Niu H J, Chang I T H. Microstructural evolution during laser cladding of M2 high-speed steel[J]. Metallurgical and Materials Transactions A, 31, 2615-2625(2000).

[21] Jiao X Y, Wang J, Wang C M et al. Effect of laser scanning speed on microstructure and wear properties of T15M cladding coating fabricated by laser cladding technology[J]. Optics and Lasers in Engineering, 110, 163-171(2018).

[22] WANG Xinyu, BIAN Liping, LIANG Yiwei et al. Effects of solution treatment on microstructure and mechanical properties of AISI 631 stainless steel strip[J]. Hot Working Technology, 51, 149-152(2022).

[23] Slamani F, Thibault D, Verreman Y et al. A new morphology of retained austenite obtained by intercritical tempering of 13Cr-4Ni martensitic stainless steel[J]. Materials Characterization, 193, 112255(2022).

[24] Liu L F, Ding Q Q, Zhong Y et al. Dislocation network in additive manufactured steel breaks strength–ductility trade-off[J]. Materials Today, 21, 354-361(2018).

[25] ZHANG Shenghua, WANG Pei, LI Dianzhong et al. Investigation of trip effect in ZG06Cr13Ni4Mo martensitic stainless steel by in situ synchrotron high energy X-ray diffraction[J]. Acta Metallurgica Sinica, 51, 1306-1314(2015).

[26] YAN Taiqi, TANG Pengjun, CHEN Bingqing et al. Effect of energy density on defects and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting[J]. Journal of Mechanical Engineering, 56, 96-105(2020).

Tools

Get Citation

Copy Citation Text

Linghuan HE, Jiamin LI, Huawei ZHANG, Juan HOU, Xinni TIAN, Aijun HUANG. Effect of heat treatment on the microstructure and mechanical property of GX4CrNi13-4 manufactured by laser cladding[J]. NUCLEAR TECHNIQUES, 2024, 47(6): 060503

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Research Articles

Received: Dec. 4, 2023

Accepted: --

Published Online: Jul. 8, 2024

The Author Email: HOU Juan (侯娟)

DOI:10.11889/j.0253-3219.2024.hjs.47.060503

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology