[1] Sawicki J A. Analyses of crud deposits on fuel rods in PWRs using Mössbauer spectroscopy[J]. Journal of Nuclear Materials, 402, 124-129(2010).

[2] Petrov V, Kendrick B K, D Walter et al. Prediction of CRUD deposition on PWR fuel using a state-of-the-art CFD-based multi-physics computational tool[J]. Nuclear Engineering and Design, 299, 95-104(2016).

[3] OUYANG Kun, XU Wei, LIU Xiaojing et al. Effect of corrosion on boiling heat transfer characteristics of metal specimens with micro-structure surface[J]. Nuclear Techniques, 46, 060606(2023).

[4] Kern D, Seaton R. A theoretical analysis of thermal surface fouling[J]. British Chemical Engineering, 4, 258-262(1959).

[5] Hasson D, Avriel M, Resnick W et al. Calcium carbonate scale deposition on heat transfer surfaces[J]. Desalination, 5, 107-119(1968).

[6] Taborek J, Hewitt G F. Thermal and hydraulic design of heat exchangers[A]. Heat exchangers design handbook, 3(2002).

[7] TAN Sichao, GAO Puzhen, SU Guanghui. Experimental and theoretical study on natural circulation flow under rolling motion condition[J]. Journal of Harbin Engineering University, 28, 1213-1217(2007).

[8] TAN Sichao, PANG Fengge, GAO Puzhen. Experimental research of effect of rolling upon heat transfer characteristic of natural circulation[J]. Nuclear Power Engineering, 27, 33-36, 69(2006).

[9] Yan B H, Gu H Y, Yu L. Effects of rolling motion on the flow and heat transfer of turbulent pulsating flow in channels[J]. Progress in Nuclear Energy, 56, 24-36(2012).

[10] LIU Dalin, LIU Xiaojing. Numerical simulation of dirt deposition in narrow rectangular channels[J]. Nuclear Power Engineering, 43, 76-81(2022).

[11] Lee C B. Modeling of corrosion product transport in PWR primary coolant[D](1990).

[12] Berger F P, Hau K F F L. Mass transfer in turbulent pipe flow measured by the electrochemical method[J]. International Journal of Heat and Mass Transfer, 20, 1185-1194(1977).

[13] Tai C Y, Lin C H. Crystal growth kinetics of the two-step model[J]. Journal of Crystal Growth, 82, 377-384(1987).

[14] WEI Lie. Study on the influence mechanism of motion conditions on the driving force characteristics of natural circulation system[D](2020).

[15] Tang Y, Chen B D, Xiong W Y et al. Comparison of flow instabilities under static condition and marine motion conditions based on experiments[J]. Annals of Nuclear Energy, 70, 11-20(2014).

[16] YIN Siyou. Numerical study on flow and heat transfer characteristics of rod bundle channel under natural circulation under typical ocean conditions[D](2019).

[17] Li W, Wu X L, Zhang D L et al. Preliminary study of coupling CFD code FLUENT and system code RELAP5[J]. Annals of Nuclear Energy, 73, 96-107(2014).

[18] Wang G L, Liu Y, Liu X J et al. Study on coupling effect of CRUD growth and heat transfer on fuel rod[J]. The International Journal of Thermal Science, 199, 108892(2024).