[1] Li C, Zhao C Y, Zhang Z C et al. Effect of sandblasting process on surface state and adhesion of Al-alloy thin wall parts[J]. Thermal Spray Technology, 14, 68-77, 90(2022).

[2] Sun S J, Ma Z, Liu Y B. The research of deformation laws of thin-parts during sandblasting process[J]. Thermal Spray Technology, 8, 40-45, 39(2016).

[3] Jing J N, Zhang L, Wang C et al. Analysis of interfacial defect formation and process control of Ni-Cr coatings by atmospheric plasma spraying[J]. Materials Research and Application, 17, 552-558(2023).

[4] Meng R. Research on the effect of laser texturing pretreatment on the properties of AlCrN coatings on the substrate surface[D](2022).

[5] Fang C H, Hou Z Y, Wang Y Q et al. Analysis of vibration and ablative mechanism of insulator pollution after pulsed laser cleaning[J]. Applied Laser, 43, 80-89(2023).

[6] Yang W F, Chang X D, Hu Y et al. Effect of laser paint removal of aircraft skin on surface integrity of substrate[J]. Chinese Journal of Lasers, 50, 0802206(2023).

[7] Zhang Z. Mechanism and experimental research on laser cleaning of rust layer on oil pipe thread surface[D](2022).

[8] Xia P Y, Yin Y H, Cai A J et al. Laser cleaning process of 2219 aluminum alloy anodic oxide film before welding[J]. Chinese Journal of Lasers, 46, 0102005(2019).

[9] Liu W J, Zhang M Q, Li Q et al. Effect of laser cleaning process parameters on surface paint removal of TC4 titanium alloy[J]. Chinese Journal of Lasers, 50, 0402010(2023).

[10] Wang Z M, Zeng X Y, Huang W L. Status and prospect of laser cleaning procedure[J]. Laser Technology, 24, 68-73(2000).

[11] Zhao H C, Qiao Y L, Du X et al. Effect and mechanism of energy density on the aluminum alloy paint cleaned by laser[J]. Laser & Optoelectronics Progress, 57, 131403(2020).

[12] Sun Y, Lin L F, Jiang D X et al. Effect of laser texturing on corrosion resistance and coating adhesion of 6061 aluminum alloy[J]. Applied Laser, 43, 73-80(2023).

[13] Liu S G, Sun S F, Chen X Z et al. Optimization of laser paint removal parameters and surface performance analysis of 2024 aluminum alloy[J]. Applied Laser, 42, 114-124(2022).

[14] Song Q L, Hu Z F, Liang X B et al. Development and application of laser cleaning technology[J]. New Technology & New Process, 1-5(2019).

[15] Xing H N, Ran H L, Zhao H F et al. Development and application of laser cleaning technology[J]. Cleaning World, 34, 23-31(2018).

[16] Tong Y Q, Ma J, Shangguan J F et al. Research progress of laser cleaning technology for aerospace materials[J]. Aeronautical Manufacturing Technology, 65, 48-56, 69(2022).

[17] Li H Y, Yang F, Guo J W et al. Development status and prospect of laser cleaning[J]. Laser Technology, 45, 654-661(2021).

[18] Chen J W. Effect of laser cleaning process on surface microstructure and properties of high strength aluminum alloy[D](2020).

[19] Han Y W, Qiao H C, Zhao J B et al. Study on the effect of different process parameters on laser cleaning of GFRP release agent layer[J]. Surface Technology, 52, 419-429(2023).

[20] Yang M J, Peng L H, Li Z Y. Development of YAG laser texturing technology[J]. Applied Laser, 22, 323-326, 316(2002).

[21] Giljean S, Bigerelle M, Anselme K et al. New insights on contact angle/roughness dependence on high surface energy materials[J]. Applied Surface Science, 257, 9631-9638(2011).