[1] Rochus P, Plesseria J Y, van Elsen M et al. New applications of rapid prototyping and rapid manufacturing (RP/RM) technologies for space instrumentation[J]. Acta Astronautica, 61, 352-359(2007).

[2] Bremen S, Meiners W, Diatlov A. Selective laser melting: a manufacturing technology for the future?[J]. Laser Technik Journal, 9, 33-38(2012).

[3] Carter L N, Essa K, Attallah M M. Optimisation of selective laser melting for a high temperature Ni-superalloy[J]. Rapid Prototyping Journal, 21, 423-432(2015).

[4] Zhang D Y, Zhang P D, Liu Z et al. Thermofluid field of molten pool and its effects during selective laser melting (SLM) of Inconel 718 alloy[J]. Additive Manufacturing, 21, 567-578(2018).

[5] Sanchez S, Smith P, Xu Z K et al. Powder bed fusion of nickel-based superalloys: a review[J]. International Journal of Machine Tools and Manufacture, 165, 103729(2021).

[6] Hariharan M K, Anderson A, Raghavan K et al. Hot corrosion behaviour of Hastelloy X and Inconel 625 in an aggressive environment for superalloys for high-temperature energy applications[J]. Applied Nanoscience, 13, 3359-3368(2023).

[7] Kunze K, Etter T, Grässlin J et al. Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)[J]. Materials Science and Engineering: A, 620, 213-222(2015).

[8] Ojo O A, Richards N L, Chaturvedi M C. Study of the fusion zone and heat-affected zone microstructures in tungsten inert gas-welded Inconel 738LC superalloy[J]. Metallurgical and Materials Transactions A, 37, 421-433(2006).

[9] Balikci E, Raman A, Mirshams R A. Tensile strengthening in the nickel-base superalloy IN738LC[J]. Journal of Materials Engineering and Performance, 9, 324-329(2000).

[10] Hays C, Rudnicki A. Evaluating alloy composition using the Gibbs triangle[J]. Journal of Materials Engineering and Performance, 17, 566-571(2008).

[11] Cloots M, Uggowitzer P J, Wegener K. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles[J]. Materials & Design, 89, 770-784(2016).

[12] Wang H, Zhang X, Wang G B et al. Selective laser melting of the hard-to-weld IN738LC superalloy: efforts to mitigate defects and the resultant microstructural and mechanical properties[J]. Journal of Alloys and Compounds, 807, 151662(2019).

[13] Seede R, Shoukr D, Zhang B et al. An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: densification, microstructure, and mechanical properties[J]. Acta Materialia, 186, 199-214(2020).

[14] Yadroitsev I, Yadroitsava I, Bertrand P et al. Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks[J]. Rapid Prototyping Journal, 18, 201-208(2012).

[15] Yao S G, Dong Y H, Li X L et al. Causes of defects in selective laser melting of AlSi10Mg[J]. Chinese Journal of Lasers, 51, 1602307(2024).

[16] Song W, Zhu Y P, Liang J J et al. Effect of powder recycling on microstructure and tensile behavior of GH4169 alloy fabricated by selective laser melting (invited)[J]. Chinese Journal of Lasers, 51, 1002310(2024).

[17] Nie W, Liu F C, Hu W W et al. Effect of pore type on high-temperature plasticity of Inconel 625 alloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 51, 1002323(2024).

[18] Yi J H, Kang J W, Wang T J et al. Effect of laser energy density on the microstructure, mechanical properties, and deformation of Inconel 718 samples fabricated by selective laser melting[J]. Journal of Alloys and Compounds, 786, 481-488(2019).

[19] Liu X P, Wang K S, Hu P et al. Formability, microstructure and properties of Inconel 718 superalloy fabricated by selective laser melting additive manufacture technology[J]. Materials, 14, 991(2021).

[20] Zhang S Z, Lei Y P, Chen Z et al. Effect of laser energy density on the microstructure and texture evolution of Hastelloy-X alloy fabricated by laser powder bed fusion[J]. Materials, 14, 4305(2021).

[21] Perevoshchikova N, Rigaud J, Sha Y et al. Optimisation of selective laser melting parameters for the Ni-based superalloy IN-738 LC using Doehlert’s design[J]. Rapid Prototyping Journal, 23, 881-892(2017).

[22] Wang J H, Liu J Y, Niu L H et al. Influence of layer thickness on microstructure and mechanical properties of 18Ni300 maraging steel fabricated by 3D printing[J]. Applied Laser, 41, 1025-1032(2021).

[23] Choi J P, Shin G H, Yang S S et al. Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting[J]. Powder Technology, 310, 60-66(2017).

[24] Yan A R, Yang T T, Wang Y L et al. Thermal properties and mechanical properties of selective laser melting different layer thicknesses of Ni powder[J]. Chinese Journal of Lasers, 43, 0203004(2016).

[25] Chu F Z, Zhang X, Huang W J et al. The formation mechanism and effect on mechanical properties of defects of aluminum alloy by selective laser melting: a review[J]. Materials Reports, 35, 11111-11119(2021).

[26] Li R D, Liu J H, Shi Y S et al. 316L stainless steel with gradient porosity fabricated by selective laser melting[J]. Journal of Materials Engineering and Performance, 19, 666-671(2010).

[27] Zhang G, Wang J H, Zhang H. Research progress of balling phenomena in selective laser melting[J]. Foundry Technology, 38, 262-265(2017).

[28] Rickenbacher L, Etter T, Hövel S et al. High temperature material properties of IN738LC processed by selective laser melting (SLM) technology[J]. Rapid Prototyping Journal, 19, 282-290(2013).

[29] Xu J Y, Ding Y T, Hu Y et al. Crack forming mechanism and anisotropy of Inconel 738 alloy by selective laser melting[J]. Rare Metal Materials and Engineering, 49, 2791-2799(2020).