[1] [1] DING Y L, TIAN H Y, WANG J Q. Design on the focusing mechanism of space remote sensing camera ［J］. Opt. Precision Eng.,2001,9(1): 36-38. (in Chinese)

[2] [2] ZAGO L, SCHWAB P, GALLIENI D. Development and testing of a high-precision, high-stiffness linear actuator for the focus-center mechanism of the SOFIA secondary mirror [J]. SPIE, 2002, 4014: 392-398.

[3] [3] WITHERSPOON B, HUFF L, JACOBY M, et al.. Results of environmental testing the focus and alignment mechanism of the near infraRed camera on the james webb space telescope [J]. SPIE, 2011,8150: 81500H-1-12.

[4] [4] WANG ZH, ZHANG L P, LI ZH H, et al.. Design of focusing mechanism of space tridimensional mapping camera ［J］. Opt. Precision Eng.,2009,17(5): 1051-1056. (in Chinese)

[5] [5] ISO 10110-6-1996.Optics and optical instruments. Preparation of drawings for optical elements and systems. Part6: centring tolerances [S].

[6] [6] ZHOU X Y, FAN D P, ZHANG ZH Y. Positioning principle and error analysis for lift electro-optical detection platform ［J］. Journal of Astronautics, 2011,32(6): 1416-1422. (in Chinese)

[7] [7] WANG T, ZHU M CH, YIN SH L, et al.. Analysis of LOS pointing error derived from precision of shafting in stabilization mechanism ［J］. Infrared and Laser Engineering, 2011,40(11): 2265-2269. (in Chinese)

[8] [8] GB/T 5847-2004.National Standards of the People's Republic of China, Dimensional chain-Methods of calculation [S].(in Chinese)

[9] [9] MA H, WANG J B. Theory of Instrument Accuracy[M]. Beijing: Beihang University Press, 2009. (in Chinese)

[10] [10] GB/T 17587.3-1998. National Standards of the People's Republic of China, Ball screws-Part3: Acceptance conditions and acceptance tests [S]. (in Chinese)