High-Performance Thick Cathode Based on Polyhydroxyalkanoate Binder for Li Metal Batteries

Dong Hyuk Kang; Minhyuck Park; Jeonghun Lee; Chan Yeol Kim; Jimin Park; Youn-Ki Lee; Jong Chan Hyun; Son Ha; Jin Hwan Kwak; Juhee Yoon; Hyemin Kim; Hyun Soo Kim; Do Hyun Kim; Sangmin Kim; Ji Yong Park; Robin Jang; Seung Jae Yang; Hee-Dae Lim; Se Youn Cho; Hyoung-Joon Jin; Seungjin Lee; Yunil Hwang; Young Soo Yun

doi:10.1007/s42765-023-00347-8

Advanced Fiber Materials, Volume. 6, Issue 1, 00347(2024)

High-Performance Thick Cathode Based on Polyhydroxyalkanoate Binder for Li Metal Batteries

Dong Hyuk Kang^1、†, Minhyuck Park^1、†, Jeonghun Lee^1、†, Chan Yeol Kim¹, Jimin Park¹, Youn-Ki Lee², Jong Chan Hyun¹, Son Ha¹, Jin Hwan Kwak³, Juhee Yoon⁴, Hyemin Kim⁴, Hyun Soo Kim¹, Do Hyun Kim¹, Sangmin Kim⁵, Ji Yong Park⁶, Robin Jang⁷, Seung Jae Yang⁷, Hee-Dae Lim⁸, Se Youn Cho², Hyoung-Joon Jin⁴, Seungjin Lee⁷, Yunil Hwang⁷, and Young Soo Yun^1,3,9、*

Author Affiliations

¹KU-KIST Graduate School of Converging Science and Technology, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, South Korea

²Carbon Composite Materials Research Center, Korea Institute of Science and Technology (KIST), 92 Chundong-ro, Bongdong-eup, Wanju-gun, Jeollabuk-do 55324, South Korea

³Energy Storage Research Center, Korea Institute of Science and Technology (KIST), 5, 14-gil Hwaraong-ro, Seoul 02792, South Korea

⁴Program in Environmental and Polymer Engineering, Inha University, 100 Inha-ro Michuhol-gu, Incheon 22212, South Korea

⁵Advanced Analysis Data Center, Korea Institute of Science and Technology (KIST), 5, 14-gil Hwaraong-ro, Seoul 02792, South Korea

⁶Advanced Nanohybrids Laboratory, Department of Chemistry and Chemical Engineering, Inha University, 100 Inha-ro, Michuhol-gu, Incheon 22212, South Korea

⁷CJ CheilJedang Corporation, 55 Gwanggyo-ro 42Beon-gil, Yeongtong-gu, Suwon 16495, South Korea

⁸Department of Chemical Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, South Korea

⁹Department of Integrative Energy Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, South Korea

show less

References(50)

[1] [1] Liu YY, Zhu YY, Cui Y. Challenges and opportunities towards fast-charging battery materials. Nat Energy. 2019;4:540–50.10.1038/s41560-019-0405-3

[2] [2] Larcher D, Tarascon JM. Towards greener and more sustainable batteries for electrical energy storage. Nat Chem. 2015;7:19–29.10.1038/nchem.2085

[3] [3] Schmidt O, Hawkes A, Gambhir A, Staffell I. The future cost of electrical energy storage based on experience rates. Nat Energy. 2017;2:17110.10.1038/nenergy.2017.110

[4] [4] Li WD, Erickson EM, Manthiram A. High-nickel layered oxide cathodes for lithium-based automotive batteries. Nat Energy. 2020;5:26–34.10.1038/s41560-019-0513-0

[5] [5] Huang H, Zhang LP, Tian HY, Yan JQ, Tong JF, Liu XH, Zhang HX, Huang HQ, Hao SM, Gao J, Yu L, Li H, Qiu JS, Zhou WD. Pulse high temperature sintering to prepare single-crystal high nickel oxide cathodes with enhanced electrochemical performance. Adv Energy Mater. 2023;13:2203188.10.1002/aenm.202203188

[6] [6] Kim JH, Park KJ, Kim SJ, Yoon CS, Sun YK. A method of increasing the energy density of layered Ni-rich Li [Ni1−2xCoxMnx]O2 cathodes (x = 0.05, 0.1, 0.2). J Mater Chem A. 2019;7:2694–701.10.1039/C8TA10438G

[7] [7] Ryu HH, Park KJ, Yoon CS, Sun YK. Capacity fading of Ni-Rich Li [NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density Li-ion batteries: Bulk or surface degradation? Chem Mater. 2018;30:1155–63.10.1021/acs.chemmater.7b05269

[8] [8] Yan PF, Zheng JM, Chen TW, Luo LL, Jiang YY, Wang K, Sui ML, Zhang JG, Zhang SL, Wang CM. Coupling of electrochemically triggered thermal and mechanical effects to aggravate failure in a layered cathode. Nat Commun. 2018;9:2437.10.1038/s41467-018-04862-w

[9] [9] Park HK, Park HY, Song K, Song SH, Kang SS, Ko KH, Eum DG, Jeon YG, Kim JH, Seong WM, Kim HS, Park JW, Kang KS. In situ multiscale probing of the synthesis of a Ni-rich layered oxide cathode reveals reaction heterogeneity driven by competing kinetic pathways. Nat Chem. 2022;14:614.10.1038/s41557-022-00915-2

[10] [10] Jung CH, Kim DH, Eum DG, Kim KH, Choi JH, Lee JW, Kim HH, Kang KS, Hong SH. New insight into microstructure engineering of Ni-rich layered oxide cathode for high performance lithium ion batteries. Adv Funct Mater. 2021;31:2010095.10.1002/adfm.202010095

[11] [11] Aurora GM, Friederike R, Lars FS, Marcel HB, Martin W, Tobias P, Richard S. Magnesium substitution in Ni-rich NMC layered cathodes for high-energy lithium ion batteries. Adv Energy Mater. 2022;12:2103045.10.1002/aenm.202103045

[12] [12] Sheng H, Meng XH, Xiao DD, Fan M, Chen WP, Wan J, Tang JL, Zou YG, Wang FY, Wen R, Shi JL, Guo YG. An air-stable high-nickel cathode with reinforced electrochemical performance enabled by convertible amorphous Li2CO3 modification. Adv Mater. 2022;34:2108947.10.1002/adma.202108947

[13] [13] Abebe EB, Yang CC, Wu SH, Chien WC, Li YJJ. Effect of Li excess on electrochemical performance of Ni-Rich LiNi0.9Co0.05Mn0.05O2 cathode materials for Li-ion batteries. ACS Appl Energy Mater. 2021;4:14295–308.10.1021/acsaem.1c03004

[14] [14] Jing ZW, Wang SN, Fu Q, Baran V, Tayal A, Casati NPM, Missyul A, Simonelli L, Knapp M, Li FJ, Ehrenberg H, Indris S, Shan CX, Hua WB. Architecting “Li-rich Ni-rich” core-shell layered cathodes for high-energy Li-ion batteries. Energy Storage Mater. 2023;59:102775.10.1016/j.ensm.2023.102775

[15] [15] Guo YJ, Zhang CH, Xin S, Shi JL, Wang WP, Fan M, Chang YX, He WH, Wang EH, Zou YG, Yang XA, Meng FQ, Zhang YY, Lei ZQ, Yin YX, Guo YG. Competitive doping chemistry for Nickel-rich layered oxide cathode materials. Angew Chem Int Ed. 2022;61:e202116865.10.1002/anie.202116865

[16] [16] Bi YJ, Tao JH, Wu YQ, Li LZ, Xu YB, Hu EY, Wu BB, Hu JT, Wang CM, Zhan JG, Qi Y, Xiao J. Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode. Science. 2020;370:1313–7.10.1126/science.abc3167

[17] [17] Yan PF, Zheng JM, Liu J, Wang BQ, Cheng XP, Zhang YF, Sun XL, Wang CM, Zhang JG. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries. Nat Energy. 2018;3:600–5.10.1038/s41560-018-0191-3

[18] [18] Kuang YD, Chen CJ, Kirsch D, Hu LB. Thick electrode batteries: principles, opportunities, and challenges. Adv Energy Mater. 2019;9:1901457.10.1002/aenm.201901457

[19] [19] Zhang X, Hui ZY, King S, Wang L, Ju ZY, Wu JY, Takeuchi KJ, Marschilok AC, West AC, Takeuchi ES, Yu GH. Tunable porous electrode architectures for enhanced Li-ion storage kinetics in thick electrodes. Nano Lett. 2021;21:5896–904.10.1021/acs.nanolett.1c02142

[20] [20] Zheng JX, Zhao Q, Liu XT, Tang T, Bock DC, Bruck AM, Tallman KR, Housel LM, Kiss AM, Marschilok AC, Takeuchi ES, Takeuchi KJ, Archer LA. Nonplanar electrode architectures for ultrahigh areal capacity batteries. ACS Energy Lett. 2019;4:271–5.10.1021/acsenergylett.8b02131

[21] [21] Wu TQ, Zhao ZD, Zhang JJ, Zhang C, Guo YX, Cao YJ, Pan SX, Liu YC, Liu PY, Ge YH, Liu W, Dong L, Lu HB. Thick electrode with thickness-independent capacity enabled by assembled two-dimensional porous nanosheets. Energy Storage Mater. 2021;36:265–71.10.1016/j.ensm.2020.12.034

[22] [22] Han X, Zhou W, Chen M, Luo L, Gu L, Zhang Q, Chen J, Liu B, Chen S, Zhang W. Liquid-phase sintering enabling mixed ionic-electronic interphases and free-standing composite cathode architecture toward high energy solid-state battery. Nano Res. 2022;15:6156–67.10.1007/s12274-022-4242-5

[23] [23] Han X, Wang S, Xu Y, Zhong G, Zhou Y, Liu B, Jiang X, Wang X, Li Y, Zhang Z, Chen S, Wang C, Yang Y, Zhang W, Wang J, Liu J, Yang J. Energy Environ Sci. 2021;14:5044–56.10.1039/D1EE01494C

[24] [24] Arnot DJ, Mayilvahanan KS, Hui JY, Takeuchi KJ, Marschilok AC, Bock DC, Wang L, West AC, Takeuchi ES. Thick electrode design for facile electron and ion transport: architectures, advanced characterization, and modeling. Acc Mater Res. 2022;3:472–83.10.1021/accountsmr.1c00281

[25] [25] Wu JY, Zhang X, Ju ZY, Wang L, Hui ZY, Mayilvahanan K, Takeuchi KJ, Marschilok AC, West AC, Takeuchi ES, Yu GH. From fundamental understanding to engineering design of high-performance thick electrodes for scalable energy-storage systems. Adv Mater. 2021;33:2101275.10.1002/adma.202101275

[26] [26] Stein M, Mistry A, Mukherjee PP. Mechanistic understanding of the role of evaporation in electrode processing. J Electrochem Soc. 2017;164:A1616–27.10.1149/2.1271707jes

[27] [27] Singh KB, Tirumkudulu MS. Cracking in drying colloidal films. Phys Rev Lett. 2007;98:218302.10.1103/PhysRevLett.98.218302

[28] [28] Chiu RC, Garino TJ, Cima MJ. Drying of granular ceramic films. 1. Effect of processing variables on cracking behavior. J Am Ceram Soc. 1993;76:2257–64.10.1111/j.1151-2916.1993.tb07762.x

[29] [29] Park KY, Park JW, Seong WM, Yoon KH, Hwang TH, Ko KH, Han JH, Yang JD, Kang KS. Understanding capacity fading mechanism of thick electrodes for lithium-ion rechargeable batteries. J Power Sources. 2020;468:228369.10.1016/j.jpowsour.2020.228369

[30] [30] Zhao D, Chen W. Analysis of polarization and thermal characteristics in lithium-ion battery with various electrode thicknesses. J Energy Storage. 2023;71:108159.10.1016/j.est.2023.108159

[31] [31] Chen CJ, Zhang Y, Li YJ, Kuang YD, Song JW, Luo W, Wang YB, Yao YG, Pastel G, Xie J, Hu LB. Highly conductive, lightweight, low-tortuosity carbon frameworks as ultrathick 3D current collectors. Adv Energy Mater. 2017;7:1700595.10.1002/aenm.201700595

[32] [32] Wang JR, Wang MM, Ren NQ, Dong JM, Li YX, Chen CH. High-areal-capacity thick cathode with vertically-aligned micro-channels for advanced lithium-ion batteries. Energy Storage Mater. 2021;39:287–93.10.1016/j.ensm.2021.04.030

[33] [33] Zhang MH, Chouchane M, Shojaee SA, Winiarski B, Liu Z, Li LT, Pelapur R, Shodiev A, Yao WL, Doux JM, Wang S, Li YX, Liu CY, Lemmens H, Franco AA, Meng YS. Coupling of multiscale imaging analysis and computational modeling for understanding thick cathode degradation mechanisms. Joule. 2023;7:201–20.10.1016/j.joule.2022.12.001

[34] [34] Kim NY, Moon J, Ryou MH, Kim SH, Kim JH, Kim JM, Bang J, Lee SY. Amphiphilic bottlebrush polymeric binders for high-mass-loading cathodes in lithium-ion batteries. Adv Energy Mater. 2022;12:2102109.10.1002/aenm.202102109

[35] [35] Ryu M, Hong YK, Lee SY, Park JH. Ultrahigh loading dry-process for solvent-free lithium-ion battery electrode fabrication. Nat Commun. 2023;14:1316.10.1038/s41467-023-37009-7

[36] [36] Park SH, King PJ, Tian RY, Boland CS, Coelho J, Zhang CF, McBean P, McEvoy N, Kremer MP, Daly D, Coleman JN, Nicolosi V. High areal capacity battery electrodes enabled by segregated nanotube networks. Nat Energy. 2019;4:560–7.10.1038/s41560-019-0398-y

[37] [37] Zhang YF, Li FZ, Yang K, Liu X, Chen YG, Lao ZQ, Mai KC, Zhang ZS. Polymer molecular engineering enables rapid electron/ion transport in ultra-thick electrode for high-energy-density flexible lithium-ion battery. Adv Funct Mater. 2021;31:2100434.10.1002/adfm.202100434

[38] [38] Yang K, Yang LY, Wang ZJ, Guo B, Song ZB, Fu Y, Ji YC, Liu MQ, Zhao WG, Liu XH, Yang SC, Pan F. Constructing a highly efficient aligned conductive network to facilitate depolarized high-areal-capacity electrodes in Li-ion batteries. Adv Energy Mater. 2021;11:2100601.10.1002/aenm.202100601

[39] [39] He Y, Jing L, Feng LX, Yang SF, Yang JR, Fu XW, Yang W, Wang Y. A smart polymeric sol-binder for building healthy active-material microenvironment in high-energy-density electrodes. Adv Energy Mater. 2023;13:2203272.10.1002/aenm.202203272

[40] [40] Xu J, Peng Y, Xing W, Ding Z, Zhang S, Pang H. Metal–organic frameworks marry carbon: booster for electrochemical energy storage. J Energy Storage. 2022;53:105104.10.1016/j.est.2022.105104

[41] [41] Liu X, Zhang Y, Guo X, Pang H. Electrospun metal–organic framework nanofiber membranes for energy storage and environmental protection. Adv Fiber Mater. 2022;4:1463–85.10.1007/s42765-022-00214-y

[42] [42] Cho SY, Yun YS, Jang D, Jeon JW, Kim BH, Lee S, Jin HJ. Ultra strong pyroprotein fibres with long-range ordering. Nat Commun. 2017;8:74.10.1038/s41467-017-00132-3

[43] [43] Kim H, Hyun JC, Kim D, Kwak JH, Lee JB, Moon JH, Choi J, Lim HD, Yang SJ, Jin HM, Ahn DJ, Kang K, Jin HJ, Lim HK, Yun YS. Revisiting lithium- and sodium-ion storage in hard carbon anodes. Adv Mater. 2023;35:2209128.10.1002/adma.202209128

[44] [44] Park MH, Ha S, Park J, Kang DH, Hyun JC, Yoon J, Jin HJ, Yun TS. Multifunctional surface-engineering of 3D-lithiophilic nanocarbon scaffold for high-voltage anode-minimized lithium metal batteries. Chem Eng J. 2023;458:141478.10.1016/j.cej.2023.141478

[45] [45] Gallagher KG, Trask SE, Bauer C, Woehrle T, Lux SF, Tschech M, Lamp P, Polzin BJ, Ha S, Long B, Wu QL, Lu WQ, Dees DW, Jansen AN. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes. J Electrochem Soc. 2016;163:A138–49.10.1149/2.0321602jes

[46] [46] Hu YH, Li H, Chen ZD, Cen WL, Wang Q, Chen YG, Davoodi A, Liu W. Li-alloy texture creates in-built Li(110) epitaxy in a thin Li-metal anode allowing high depth-of-discharge cycling in carbonate electrolyte. Chem Eng J. 2023;466:143084.10.1016/j.cej.2023.143084

[47] [47] Wang QS, Meng T, Li YH, Yang JD, Huang BB, Ou SQ, Meng CG, Zhang SQ, Tong YX. Consecutive chemical bonds reconstructing surface structure of silicon anode for high-performance lithium-ion battery. Energy Stor Mater. 2021;39:354–64.

[48] [48] Chen ZD, Soltani A, Chen YG, Zhang QB, Davoodi A, Hosseinpour S, Peukert W, Liu W. Emerging organic surface chemistry for Si anodes in lithium-ion batteries: advances, prospects, and beyond. Adv Energy Mater. 2022;12:2200924.10.1002/aenm.202200924

[49] [49] Yoon HJ, Kim NR, Jin HJ, Yun TS. Macroporous catalytic carbon nanotemplates for sodium metal anodes. Adv Energy Mater. 2018;8:1701261.10.1002/aenm.201701261

[50] [50] Kang DH, Lee E, Youn BS, Ha S, Hyun JC, Yoon J, Jang D, Kim KS, Kim H, Lee SM, Lee S, Jin HJ, Lim HK, Yun YS. Critical factors to inhibit water-splitting side reaction in carbon-based electrode materials for zinc metal anodes. Carbon Energy. 2022;4:1080–92.10.1002/cey2.254

Tools

Get Citation

Copy Citation Text

Dong Hyuk Kang, Minhyuck Park, Jeonghun Lee, Chan Yeol Kim, Jimin Park, Youn-Ki Lee, Jong Chan Hyun, Son Ha, Jin Hwan Kwak, Juhee Yoon, Hyemin Kim, Hyun Soo Kim, Do Hyun Kim, Sangmin Kim, Ji Yong Park, Robin Jang, Seung Jae Yang, Hee-Dae Lim, Se Youn Cho, Hyoung-Joon Jin, Seungjin Lee, Yunil Hwang, Young Soo Yun. High-Performance Thick Cathode Based on Polyhydroxyalkanoate Binder for Li Metal Batteries[J]. Advanced Fiber Materials, 2024, 6(1): 00347

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Research Articles

Received: Jul. 25, 2023

Accepted: Oct. 29, 2023

Published Online: Jul. 4, 2024

The Author Email: Young Soo Yun (c-ysyun@korea.ac.kr)

DOI:10.1007/s42765-023-00347-8

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology