[1] Wu X, Sharman R, Mei J et al. Microstructure and properties of a laser fabricated burn-resistant Ti alloy[J]. Materials & Design, 25, 103-109(2004). http://www.sciencedirect.com/science/article/pii/S0261306903002231

[2] Sexton L, Lavin S, Byrne G et al. Laser cladding of aerospace materials[J]. Journal of Materials Processing Technology, 122, 63-68(2002). http://www.sciencedirect.com/science/article/pii/S0924013601011219

[3] Frazier W E. Metal additive manufacturing: a review[J]. Journal of Materials Engineering and Performance, 23, 1917-1928(2014). http://www.tandfonline.com/servlet/linkout?suffix=CIT0001&dbid=16&doi=10.1080%2F13621718.2017.1388995&key=10.1007%2Fs11665-014-0958-z

[4] Graf B, Gumenyuk A, Rethmeier M. Laser metal deposition as repair technology for stainless steel and titanium alloys[J]. Physics Procedia, 39, 376-381(2012). http://www.sciencedirect.com/science/article/pii/S1875389212025783

[5] Liu Q C, Brandt M, Janardhana M et al. Potential application and certification of laser cladding technology for repair of ageing aircraft components[C]. AIP Conference Proceedings, 257, 257-266(2011).

[6] Bian H Y, Zhai Q X, Li Y et al. Microstructure and tensile properties of laser deposition repair GH738 superalloy[J]. Chinese Journal of Lasers, 44, 1002003(2017).

[7] Yang G, Ma Y, Wang C et al. Effects of additive repair on microstructure and mechanical properties of laser additive manufactured TC4 titanium[J]. Chinese Journal of Lasers, 45, 1202002(2018).

[8] Acharya R, Bansal R, Gambone J J et al. A coupled thermal, fluid flow, and solidification model for the processing of single-crystal alloy CMSX-4 through scanning laser epitaxy for turbine engine hot-section component repair (part I)[J]. Metallurgical and Materials Transactions B, 45, 2247-2261(2014). http://link.springer.com/article/10.1007/s11663-014-0117-9

[9] Ren Y M, Lin X, Fu X et al. Microstructure and deformation behavior of Ti-6Al-4V alloy by high-power laser solid forming[J]. Acta Materialia, 132, 82-95(2017). http://www.sciencedirect.com/science/article/pii/S1359645417303099

[10] Qin L Y. Research on ley technique of laser deposition repair titanium alloy[D]. Shenyang: Shenyang University of Technology, 98-102(2014).

[11] Wang W F, Wang M C, Jie Z et al. Research on the microstructure and wear resistance of titanium alloy structural members repaired by laser cladding[J]. Optics and Lasers in Engineering, 46, 810-816(2008). http://www.sciencedirect.com/science/article/pii/S014381660800122X

[12] Paydas H, Mertens A, Carrus R et al. Laser cladding as repair technology for Ti-6Al-4V alloy: influence of building strategy on microstructure and hardness[J]. Materials & Design, 85, 497-510(2015).

[13] Brandl E, Michailov V, Viehweger B et al. Deposition of Ti-6Al-4V using laser and wire, part I: microstructural properties of single beads[J]. Surface and Coatings Technology, 206, 1120-1129(2011).

[14] Welsch G, Boyer R, Collings E W et al. Materials properties handbook: titanium alloys[M]. Ohio, USA: ASM International, 10-30(1994).

[15] Kelly S M. Thermal and microstructure modeling of metal deposition processes with application to Ti-6Al-4V[D]. Blacksburg: Virginia Tech, 32-50(2004).

[16] Ahmed T, Rack H J. Phase transformations during cooling in α+β titanium alloys[J]. Materials Science and Engineering: A, 243, 206-211(1998). http://www.sciencedirect.com/science/article/pii/S0921509397008022

[17] Cottam R, Brandt M. Laser cladding of Ti-6Al-4V powder on Ti-6Al-4V substrate: effect of laser cladding parameters on microstructure[J]. Physics Procedia, 12, 323-329(2011). http://www.sciencedirect.com/science/article/pii/S1875389211001209