[1] [1] Y V Bakin, G N Ziouzev, M B Lioudomirski. Laser Gyros with Total Reflection Prisms[R]. Optical Gyros and Their Application, 1999.

[2] [2] Yao Chengkang, Zeng Xiaodong, Cao Changqing. Intensity properties of output light in prism laser gyro with mechanical dither bias[J]. Acta Physica Sinica, 2012, 61(9): 094216.

[3] [3] Liu Jianning, Jiang Junbiao, Shi Shunxiang, et al.. Analysis of total reflection prism ring laser′s output characteristic and gyroscope′s accuracy[J]. Chinese J Lasers, 2013, 40(1): 0102002.

[4] [4] Jin Shilong, Long Xingwu, Wang Fei, et al.. Technology research for ring laser gyro to overcome the environmental temperature variation[J]. Acta Optica Sinica, 2006, 26(3): 409-410.

[5] [5] Ma Zhanlong, Liu Jian, Wang Junlin. Development and application of ultra-smooth optical surface polishing technology[J]. Laser & Optoelectronics Progress, 2011, 48(8): 082202.

[6] [6] Shi Shunxiang, Zhang Haixing, Liu Jinsong. Physical Optics and Applied Optics[M]. Xi′an: Xidian University Press, 2000. 230-231.

[7] [7] Liao Yanbiao. Polarization Optics[M]. Beijing: Science Press, 2003. 140-142.

[8] [8] Jiang Yuchuan. A simple method of obtaining stress function[J]. Mechanics and Practice, 2004, 24: 62-63.

[9] [9] Li Zhicheng, Tang Zhilie, Chen Ping, et al.. Study of photoelastic stress distribution and imaging method based on stokes parameters[J]. Acta Optica Sinica, 2012, 32(5): 0512005.

[10] [10] Wang Qiyu, Li Qianghua. Simulaneous measurement of temperature and lateral force based on polarization dependent loss of fiber Bragg grating[J]. Chinese J Lasers, 2012, 39(12): 1205003.

[11] [11] Wang Kai, Yang Haiou, Liu Fencheng, et al.. Element method simulation of thin wall part with pre-deformation substrate during laser solid forming[J]. Chinese J Lasers, 2012, 39(6): 0603002.

[12] [12] Zhang Dejiang, Liu Liren, Sun Jianfeng, et al.. The research on wavefront error induced by the deformation of prisms under gravity[J]. Acta Photonica Sinica, 2006, 35(4): 618-621.