[1] [1] MEN Z X. Effect of heat treatment on the microstructure and mechanical properties of 18Ni300 stainless steel melted by laser selective melting［J］. Applied Laser, 2022, 42(11): 29-36.

[4] [4] PAUL M J, MUNIANDY Y, KRUZIC J J, et al. Effect of heat treatment on the strength and fracture resistance of a laser powder bed fusion-processed 18Ni-300 maraging steel［J］. Materials Science and Engineering: A, 2022, 844: 143167.

[5] [5] NIU M C, ZHOU G, WANG W, et al. Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel［J］. Acta Materialia, 2019, 179: 296-307.

[6] [6] WANG W, YAN W, DUAN Q Q, et al. Study on fatigue property of a new 2.8GPa grade maraging steel［J］. Materials Science and Engineering: A, 2010, 527(13/14): 3057-3063.

[7] [7] NI C, SHI Y, LIU J, et al. Characterization of Al0.5FeCu0.7NiCoCr high-entropy alloy coating on aluminum alloy by laser cladding［J］. Optics & Laser Technology, 2018, 105: 257-263.

[8] [8] CHEN J W, ZHANG C H, ZHOU F Q, et al. Microstructural, electrochemical and wear-corrosion characterization of TC4-5Cu alloy fabricated by selective laser melting［J］. Journal of Alloys and Compounds, 2021, 874: 159953.

[9] [9] CHEN X G, QIN G, GAO X F, et al. Strengthening CoCrFeNi high-entropy alloy by Laves and boride phases［J］. China Foundry, 2022, 19(6): 457-463.

[10] [10] LIANG H, MIAO J W, GAO B Y, et al. Microstructure and tribological properties of AlCrFe2Ni2W0.2Mo0.75 high-entropy alloy coating prepared by laser cladding in seawater, NaCl solution and deionized water［J］. Surface and Coatings Technology, 2020, 400: 126214.

[11] [11] LI Y F, ZHANG J, HUANG X H, et al. Influence of laser power on microstructure evolution and properties of laser cladded FeNiCoCrMo HEA coatings［J］. Materials Today Communications, 2023, 35: 105615.

[12] [12] DENG C, WANG C, CHAI L J, et al. Mechanical and chemical properties of CoCrFeNiMo0.2 high entropy alloy coating fabricated on Ti6Al4V by laser cladding［J］. Intermetallics, 2022, 144: 107504.

[13] [13] ZHU C H, XU L J, LIU M J, et al. A review on improving mechanical properties of high entropy alloy: Interstitial atom doping［J］. Journal of Materials Research and Technology, 2023, 24: 7832-7851.

[14] [14] GUO Y, LIU L, ZHANG Y, et al. A superfine eutectic microstructure and the mechanical properties of CoCrFeNiMox high-entropy alloys［J］. Journal of Materials Research, 2018, 33(19): 3258-3265.

[15] [15] WANG J Y, ZOU J P, YANG H L, et al. High strength and ductility of an additively manufactured CrCoNi medium-entropy alloy achieved by minor Mo doping［J］. Materials Science and Engineering: A, 2022, 843: 143129.

[16] [16] WANG W R, WANG J Q, SUN Z H, et al. Effect of Mo and aging temperature on corrosion behavior of (CoCrFeNi)100-x Mox high-entropy alloys［J］. Journal of Alloys and Compounds, 2020, 812: 152139.

[17] [17] JGLE E A, SHENG Z D, KRNSTEINER P, et al. Comparison of maraging steel micro-and nanostructure produced conventionally and by laser additive manufacturing［J］. Materials, 2016, 10(1): 8.

[18] [18] DAI C D, LUO H, LI J, et al. X-ray photoelectron spectroscopy and electrochemical investigation of the passive behavior of high-entropy FeCoCrNiMox alloys in sulfuric acid［J］. Applied Surface Science, 2020, 499: 143903.

[19] [19] BROWNLIE F, HODGKIESS T, FANICCHIA F. Erosion-corrosion behaviour of CoCrFeNiMo0.85 and Al0.5CoCrFeNi complex concentrated alloys produced by laser metal deposition［J］. Surface and Coatings Technology, 2021, 423: 127634.

[20] [20] YIN S, CHEN C Y, YAN X C, et al. The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel［J］. Additive Manufacturing, 2018, 22: 592-600.

[21] [21] SURYAWANSHI J, PRASHANTH K G, RAMAMURTY U. Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting［J］. Journal of Alloys and Compounds, 2017, 725: 355-364.

[22] [22] XU T Z, ZHANG S, WANG Z Y, et al. Wear behavior of graphite self-lubricating Babbitt alloy composite coating on 20 steel prepared by laser cladding［J］. Engineering Failure Analysis, 2022, 141: 106698.

[23] [23] LIU Q S, LIU X B, WANG G, et al. Effect of Cu content on microstructure evolution and tribological behaviors of Ni60 composite coatings on 45# steel by laser cladding［J］. Optics & Laser Technology, 2022, 156: 108549.

[24] [24] DE CARVALHO L G, ANDRADE M S, PLAUT R L, et al. A dilatometric study of the phase transformations in 300 and 350 maraging steels during continuous heating rates［J］. Materials Research, 2013, 16(4): 740-744.

[25] [25] YAO J, ZHAO L, DING R C, et al. Study on the quasistatic compression performance of arch microstrut lattice structure by selective laser melting［J］. Advanced Engineering Materials, 2022, 24(5): 2101156.