Researching | Microstructure and Tensile Properties of Ti6Al4V Titanium Alloy by Dual‑Pulse Laser Shock Peening

Chinese Journal of Lasers, Volume. 51, Issue 20, 2002201(2024)

Microstructure and Tensile Properties of Ti6Al4V Titanium Alloy by Dual‑Pulse Laser Shock Peening

Xiankai Meng^1,2、*, Han Zhang², Fuyang Song², Kun Wang², and Jianzhong Zhou²

Author Affiliations

¹Institute of Advanced Manufacturing and Modern Equipment Technology Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu , China

²School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu , China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (12)

References (33)

Paper Information

References(33)

[1] Qian J H. Application and development of new titanium alloys for aerospace[J]. Chinese Journal of Rare Metals, 24, 218-223(2000).

[2] He Y, Qu X H, Wang Y et al. The development and application of overview of titanium alloy[J]. Equipment Manufacturing Technology, 160-161(2014).

[3] Zhu Y T, Liao X Z. Retaining ductility[J]. Nature Materials, 3, 351-352(2004).

[4] Lu K, Lu L, Suresh S. Strengthening materials by engineering coherent internal boundaries at the nanoscale[J]. Science, 324, 349-352(2009).

[5] Jian W W, Cheng G M, Xu W Z et al. Physics and model of strengthening by parallel stacking faults[J]. Applied Physics Letters, 103, 133108(2013).

[6] Fang T H, Li W L, Tao N R et al. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper[J]. Science, 331, 1587-1590(2011).

[7] Yuan F P, Chen P, Feng Y P et al. Strain hardening behaviors and strain rate sensitivity of gradient-grained Fe under compression over a wide range of strain rates[J]. Mechanics of Materials, 95, 71-82(2016).

[8] Lu N S, Suo Z G, Vlassak J J. The effect of film thickness on the failure strain of polymer-supported metal films[J]. Acta Materialia, 58, 1679-1687(2010).

[9] Wu X L, Jiang P, Chen L et al. Extraordinary strain hardening by gradient structure[J]. Proceedings of the National Academy of Sciences of the United States of America, 111, 7197-7201(2014).

[10] Wang Z D, Sun G F, Lu Y et al. Microstructural characterization and mechanical behavior of ultrasonic impact peened and laser shock peened AISI 316L stainless steel[J]. Surface and Coatings Technology, 385, 125403(2020).

[11] Zhang H P, Cai Z Y, Chi J X et al. Gradient microstructure evolution in laser shock peened Ti6Al4V titanium alloy[J]. Surface and Coatings Technology, 437, 128378(2022).

[12] Liao X L, Su B Y, Xu S et al. Flow law of plastic deformation of TC4 titanium alloy by laser shock peening[J]. Chinese Journal of Lasers, 50, 1602206(2023).

[13] Meng X K, Zhao Y M, Zhou J Z et al. Surface properties of 2024 aluminum alloy strengthened by laser ultrasonic composite shock peening[J]. Chinese Journal of Lasers, 49, 1602003(2022).

[14] Mironov S, Ozerov M, Kalinenko A et al. On the relationship between microstructure and residual stress in laser-shock-peened Ti-6Al-4V[J]. Journal of Alloys and Compounds, 900, 163383(2022).

[15] Xia X F, Zhou J Z, Gou Y Q et al. Corrosion resistance of 2024-T351 aluminum alloy processed by laser peening without coating[J]. Chinese Journal of Lasers, 51, 1202204(2024).

[16] Lu J Z, Deng W W, Luo K Y et al. Surface EBSD analysis and strengthening mechanism of AISI304 stainless steel subjected to massive LSP treatment with different pulse energies[J]. Materials Characterization, 125, 99-107(2017).

[17] Luo K Y, Lu J Z, Wang Q W et al. Residual stress distribution of Ti-6Al-4V alloy under different ns-LSP processing parameters[J]. Applied Surface Science, 285, 607-615(2013).

[18] Meng X K, Zhang Z Y, Zhou J Z et al. Analysis of vibration fatigue life and fracture topography of TC6 titanium alloy by laser peening[J]. Aeronautical Manufacturing Technology, 65, 73-79(2022).

[19] Liu K, Yi Y M, Li L B. Experimental investigation of delayed double pulse laser produced plasma in air[J]. Acta Physica Sinica, 61, 225205(2012).

[20] Corsi M, Cristoforetti G, Giuffrida M et al. Three-dimensional analysis of laser induced plasmas in single and double pulse configuration[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 59, 723-735(2004).

[21] Wang J X. Collinear double pulse nanosecond laser-plasma dynamics[D](2014).

[22] Sun X. Research on mechanism of double-pulse laser strengthened plasma shock wave[D](2019).

[23] Peyre P, Fabbro R, Merrien P et al. Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour[J]. Materials Science and Engineering: A, 210, 102-113(1996).

[24] Chukwuike V I, Echem O G, Prabhakaran S et al. Laser shock peening (LSP): electrochemical and hydrodynamic investigation of corrosion protection pre-treatment for a copper surface in 3.5% NaCl medium[J]. Corrosion Science, 179, 109156(2021).

[25] Warwick J L W, Coakley J, Raghunathan S L et al. Effect of texture on load partitioning in Ti-6Al-4V[J]. Acta Materialia, 60, 4117-4127(2012).

[26] Ge M Z, Xiang J Y, Tang Y et al. Wear behavior of Mg-3Al-1Zn alloy subjected to laser shock peening[J]. Surface and Coatings Technology, 337, 501-509(2018).

[27] Huang Y L, Yang F H, Liang G Y et al. Using in-situ technique to determine laser absorptivity of Al- alloys[J]. Chinese Journal of Lasers, 30, 449-453(2003).

[28] Hall E O. The deformation and ageing of mild steel: III discussion of results[J]. Proceedings of the Physical Society B, 64, 747-753(1951).

[29] Petch N J. The cleavage strength of polycrystals[J]. Journal of Iron and Steel Research International, 174, 25-28(1953).

[30] Taylor G I. The mechanism of plastic deformation of crystals. Part I. Theoretical[J]. Proceedings of the Royal Society of London, 145, 362-387(1934).

[31] Zhang X D, Hansen N, Gao Y K et al. Hall–Petch and dislocation strengthening in graded nanostructured steel[J]. Acta Materialia, 60, 5933-5943(2012).

[32] Hobbs B E, Regenauer-Lieb K, Ord A. Folding with thermal-mechanical feedback: a reply[J]. Journal of Structural Geology, 31, 752-755(2009).

[33] Wilson D V, Bate P S. Influences of cell walls and grain boundaries on transient responses of an if steel to changes in strain path[J]. Acta Metallurgica Et Materialia, 42, 1099-1111(1994).

Tools

Get Citation

Copy Citation Text

Xiankai Meng, Han Zhang, Fuyang Song, Kun Wang, Jianzhong Zhou. Microstructure and Tensile Properties of Ti6Al4V Titanium Alloy by Dual‑Pulse Laser Shock Peening[J]. Chinese Journal of Lasers, 2024, 51(20): 2002201

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Laser Surface Machining

Received: Jan. 4, 2024

Accepted: Feb. 5, 2024

Published Online: Oct. 12, 2024

The Author Email: Meng Xiankai (mengdetiankong10@126.com)

DOI:10.3788/CJL240456

CSTR:32183.14.CJL240456

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology