Laser & Optoelectronics Progress, Volume. 55, Issue 1, 11410(2018)

3D Femtosecond Laser Nanoprinting

Liu Monan1, Li Mutian2, and Sun Hongbo2、*
Author Affiliations
  • 1College of Physics, Jilin University, Changchun, Jilin 130012, China
  • 2State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun, Jilin 130012, China
  • show less
    Figures & Tables(9)
    Basics of two-photon photopolymerization (TPP)[48]. (a) Schematic of TPP fabrication; (b) achievement of sub-diffraction-limit (SDL) fabrication accuracy [the absorption probabilities of single photo absorption (SPA) and TPA are denoted by dashed and solid lines, respectively; the inset is a diffraction pattern]
    Schematic of 3D femtosecond laser nanoprinting system
    Micro-nanostructures fabricated via 3D FsLNP. (a) Micro-bull sculpture by raster scanning[23]; (b) micro-basin developed from a bio-photoresist[49]; (c) 3D biomimetic lamellate wrinkle structure developed from a hydrogel[56]; (d) university badge pattern assembled from CdTe quantum dots[57]
    Schematics and SEM images of microlens arrays with different curvature units (MLADC) fabricated via 3D FsLNP. (a) Schematic of perspective view; (b) schematic of cross-section view as well as the focal plane; (c) SEM image shot from top; (d) SEM image shot from side[67]
    Top-view SEM micrographs of the microlasers with different shapes fabricated via 3D FsLNP on the narrow band filter substrate[68]. (a) Circular disk; (b) circular ring; (c) spiral ring; (d) spiral ring stacked on circular ring; (e) spiral ring stacked on circular disk
    3D FsLNP using diversiform silk-based aqueous inks[49]. (a) Image of silk fibroin extracted from Bombyx mori silkworm cocoons in the inset; (b) image of renewable silk fibroin (RSF) aqueous mother solution (mass fraction of 3%); (c) diversiform silk-based aqueous inks [(I) RSF/MB aqueous solution, (II) RSF/Ag nanoseed aqueous solution, (III) RSF/AgNO3 aqueous solution, (IV) RSF/HAuCl4 aqueous solution]; (d) schematic
    Protein-based multi-mode interference (MMI) optical micro-splitters via 3D FsLNP[88]. (a) Schematic of 3D FsLNP of protein-based MMI micro-splitters; (b) optical microscopic image of protein-based MMI micro-splitters prepared on MgF2 substrate, the scale bar is 10 μm
    Natural compound eye and high quality artificial compound eye via 3D FsLNP combined with the high-speed voxel-modulation laser scanning method[89]. (a) Top-view and(b) magnified SEM images of a natural compound eye showing a macrobase and hundreds of 100% filled hexagonal micro-ommatidia; (c) top-view and (d) 30°-tilted magnified SEM images of the bio-inspired artificial compound eye, the 100% fill factor of hexagonal ommatidia is comparable to t
    • Table 1. Comparison between 3D FsLNP and 3D laser printing

      View table

      Table 1. Comparison between 3D FsLNP and 3D laser printing

      TechniqueMaterialPrecisionScaleMechanism
      3D FsLNPPolymers, metal, metal oxide, silk fibroin, etc.~10 nmμmTwo-photon photopolymerization
      SLM[50-53]Plastic fine powder, ceramic powder>10 μmcmSelective powder sintering
      LENS[54-55]Metal powder>10 μmmmSelective laser sintering &laser cladding
    Tools

    Get Citation

    Copy Citation Text

    Liu Monan, Li Mutian, Sun Hongbo. 3D Femtosecond Laser Nanoprinting[J]. Laser & Optoelectronics Progress, 2018, 55(1): 11410

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Lasers and Laser Optics

    Received: Aug. 9, 2017

    Accepted: --

    Published Online: Sep. 10, 2018

    The Author Email: Sun Hongbo (hbsun@jlu.edu.cn)

    DOI:10.3788/LOP55.011410

    Topics