[1] [1] Tan Jiubin, Li Dongsheng. Some research developments of key-technology in super precision instruments engineering[J]. Journal of China Institute of Metrology, 2003, 14(2): 83-88.

[2] [2] Wang Daodang, Wang Fumin, Chen Xixi, et al.. Three-dimensional coordinate measurement with point-diffraction interferometer based on Levenbery-Marquardt algorithm[J]. Acta Optica Sinica, 2014, 34(8): 0812001.

[3] [3] Zhang Xuping, Wang Jiaqi, Zhang Yixin, et al.. Large-scale three-dimensional stereo vision geometric measurement system[J]. Acta Optica Sinica, 2012, 32(3): 0315002.

[4] [4] Hu Jinzhong, Yu Xiaofen, Ren Xing, et al.. Optimal layout of three-dimensional coordinate measurement system based on laser multi-lateration[J]. Chinese J Lasers, 2014, 41(7): 0708001.

[5] [5] Zhou Sen, Guo Yongcai, Gao Chao. Development of a laser-based geometric measurement system for large-scale conical[J]. Chinese J Lasers, 2014, 41(5): 0508008.

[6] [6] Peng Shijun, Miao Erlong, Shi Zhenguang, et al.. Research on high-precision measurement of radius of curvature[J]. Laser & Optoelectronics Progress, 2014, 51(1): 011201.

[7] [7] Chao Zhichao, Fu Sihua, Jiang Guangwen, et al.. Mono camera and laser rangefinding sensor position-pose measurement system[J]. Acta Optica Sinica, 2011, 31(3): 0312001.

[8] [8] Cuypers W, Van Gestel N, Voet A, et al.. Optical measurement techniques for mobile and large-scale dimensional metrology[J]. Opt&Lasers in Eng, 2009, 34(3-4): 292-300.

[9] [9] Masuzawa T, Kim B J. Twin-probe vibroscanning method for dimensional measurement of microholes[J]. Annals of CIRP, 1997, 46(1): 437-440.

[10] [10] Dich L Z, Latyev SM, Status of research and development in coordinate measurement technology[J]. J Opt Technol, 1994, 61(9): 636-640.

[11] [11] Erkrit L, Nobuyuki A, Masahiro Y. Analysis of measurement accuracy of quadrilateral hole using optical inner-diameter-measuring machine[J]. Opt Eng, 2003, 42(9): 2568-2575.

[12] [12] Fedorov V G. Six-axis coordinates measuring machines[J]. Measurement Techniques, 2008, 51(7): 724-725.

[13] [13] Lu R S, Li Y F. A global calibration method for large-scale multi-sensor visual measurement systems[J]. Sensors and Actuators A: Physical, 2004, 116(3): 384-393.

[14] [14] Guolu Ma, Bin Zhao. Polar transformation-based phase-scanning method for centering a non-diffracting fringe image[J]. Opt Commun, 2014, 325: 47-53.

[15] [15] Chen Hui, Zhao Bin. Global center detection algorithm of non-diffracting spot[J]. Semiconductor Optoelectronics, 2008, 29(5):770-773.

[16] [16] Bi Xiaowei, Zhu Limin, Zhao Bin. A center detection algorithm of non-diffracting beam based on ring filtering[J]. Journal of Shanghai Jiaotong University, 2010, 44(1): 106-110.

[17] [17] Veronika, R.Meyer. Measurement uncertainty[J]. Journal of Chromatography A, 2007, 1158(1): 15-24.

[18] [18] Peng Shijun, Miao Erlong. Sub-micron precision measurement of radius of curvature and uncertainties analysis[J]. Acta Optica Sinica, 2014, 34(5): 0512001.

[19] [19] Wang Yang, Yan Changxiang, Zhang Da, et al.. Error analysis for the nod-contact measuring system of pointing mirror[J]. Acta Optica Sinica, 2013, 33(10): 1012001.

[20] [20] Chen Hui, Zhao Bin, Ma Guolu. Study on direct mapping calibration method of an electronic target based on non-diffracting beam[J]. Laser Technology, 2011, 35(3): 407-411.