[1] [1] Chen Genyu, Bu Chun, Deng Hui, et al.. Research on laser and mechanical compound truing and dressing of superabrasive grinding wheels[J]. Chinese J Laser, 2012, 39(7): 0703002.

[2] [2] Ali Z, Taghi T, Bahman A, et al.. Picosecond laser treatment of metal-bonded CBN and diamond superabrasive surfaces[J]. Int J Adv Manuf Technol, 2015, 76(5-8): 1479-1491.

[3] [3] Zhang Jianmin, Ma Zhiliang, Feng Guobin, et al.. Influence of tangential airflows velocity on ablation heat of laser irradiated glass fiber reinforced resin composites[J]. Chinese J Lasers, 2015, 42(3): 0306004.

[4] [4] Peng Guoliang, Du Taijiao, Liu Feng, et al.. Simulation study of laser energy coupling coefficient in the process of ablating glass fiber/epoxy composites[J]. Chinese J Lasers, 2014, 41(2): 0203001.

[5] [5] Deng H, Chen G Y, Zhou C, et al.. Processing parameter optimization for the laser dressing of bronze-bonded diamond wheels[J]. Appl Surf Sci, 2014, 290: 475-481.

[6] [6] Chen Genyu, Chen Guogui, Huang Kong, et al.. Study on the accuracy for laser truing and dressing of bronze-bonded diamond wheels[J]. Chinese J Lasers, 2009, 36(5): 1278-1281.

[7] [7] Chen G Y, Mei L F, Zhang B, et al.. Experiment and numerical simulation study on laser truing and dressing of bronze-bonded diamond wheel[J]. Opt Laser Eng, 2010, 48(3): 295-1304.

[8] [8] Lu Q M, Mao S S, Mao X L, et al.. Delayed phase explosion during high-power nanosecond laser ablation of silicon[J]. Appl Phys Lett, 2002, 80(17): 3072-3074.

[9] [9] Yoo J H, Jeong S H, Mao X L, et al.. Evidence for phase-explosion and generation of large particles during high power nanosecond laser ablation of silicon[J]. Appl Phys Lett, 2000, 76(6): 783-785.

[10] [10] Perez D, Lewis L J. Ablation of solids under femtosecond laser pulses[J]. Phys Rev Lett, 2002, 89(25): 255504.

[11] [11] Yang Hongdao, Li Xiaohong, Li Guoqiang, et al.. Silicon surface microstructures created by 1064 nm Nd∶YAG nanosecond laser[J]. Acta Phys Sin, 2011, 60(2): 027901.

[12] [12] Hendijanifard M, Willis D A. Validity of the taylor-sedov theory for studying laser-induced phase explosion and shock waves[J]. Journal of Nanoscience and Nanotechnology, 2015, 15(4): 3249-3253.

[13] [13] Kudryashov S I, Allen S D. Optical transmissi on measurements of explosive boiling and liftoff of a layer of micron-scale water droplets from a KrF laser-heated Si substrate[J]. J App Phys, 2003, 93(7): 4306-4308.

[14] [14] Bulgakova N M, Bourakov L M. Phase explosion under ultrashort pulsed laser ablation: modeling with analysis of metastable state of melt[J]. Appl Surf Sci, 2002, 197: 41-44.

[15] [15] Shen M Y, Crouch C H, Carey J E, et al.. Formation of regular arrays of silicon microspikes by femtosecond laser irradiation through a mask[J]. Appl Phys Lett, 2003, 82(11): 1715.

[16] [16] Han Jinghua, Feng Guoying, Yang Liming, et al.. Influence of the high- repetition- pulsed laser beam size on the damage characteristics of absorbing glass[J]. Acta Phys Sin, 2011, 60(2): 028106.

[17] [17] Martynyuk M M. Vaporization and boiling of liquid metal in an exploding wire[J]. Sov Phys Tech Phys, 1974, 19: 793-797.

[18] [18] Pakhomov A V, Thompson M S, Gregory D A. Laser-induced phase explosions in lead, tin and other elements: microsecond regime and UV-emission[J]. J Phys D: Appl Phys, 2003, 36(17): 2067-2075.

[19] [19] Bulgakova N M, Bulgakov A V. Pulsed laser ablation of solids: Transition from normal vaporization to phase explosion[J]. Appl Phys A, 2001, 73(2): 199-208.

[20] [20] Yoo J H, Borisov O V, Nao X L, et al.. Existence of phase explosion during laser ablation and its effects on inductively coupled plasma-mass spectroscopy[J]. Anal Chem, 2001, 73(10): 2288-2293.