[1] Weingarten C, Buchbinder D, Pirch N et al. Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg[J]. Journal of Materials Processing Technology, 221, 112-120(2015).

[2] Zhou R S, Wei K W, Liang J J et al. Basic process of new directional solidification nickel‑based superalloy fabricated by laser powder bed fusion[J]. Chinese Journal of Lasers, 50, 2402304(2023).

[3] Fang L J, Sun B B, Zhang Q et al. Structural design and analysis of selective laser melting forming parts[J]. Laser & Optoelectronics Progress, 60, 0514010(2023).

[4] Li S, Hassanin H, Attallah M M et al. The development of TiNi-based negative Poisson’s ratio structure using selective laser melting[J]. Acta Materialia, 105, 75-83(2016).

[5] Pinkerton A J. Lasers in additive manufacturing[J]. Optics & Laser Technology, 78, 25-32(2016).

[6] Wu Z Y, Sun Z Z, Wang H L et al. Effect of SLM forming parameters on relative-density of 18Ni-300 die steel[J]. Laser & Optoelectronics Progress, 59, 1716001(2022).

[7] Li X Z, Fang X W, Wang S P et al. Selective laser melted AZ91D magnesium alloy with superior balance of strength and ductility[J]. Journal of Magnesium and Alloys, 11, 4644-4658(2023).

[8] Yang Y, Xiong X M, Chen J et al. Research advances in magnesium and magnesium alloys worldwide in 2020[J]. Journal of Magnesium and Alloys, 9, 705-747(2021).

[9] Prasad S V S, Prasad S B, Verma K et al. The role and significance of Magnesium in modern day research-a review[J]. Journal of Magnesium and Alloys, 10, 1-61(2022).

[10] Tsakiris V, Tardei C, Clicinschi F M. Biodegradable Mg alloys for orthopedic implants: a review[J]. Journal of Magnesium and Alloys, 9, 1884-1905(2021).

[11] Wei K W, Wang Z M, Zeng X Y. Element loss of AZ91D magnesium alloy during selective laser melting process[J]. Acta Metallurgica Sinica, 52, 184-190(2016).

[12] Liu J G, Wen P. Metal vaporization and its influence during laser powder bed fusion process[J]. Materials & Design, 215, 110505(2022).

[13] Manakari V, Parande G, Gupta M. Selective laser melting of magnesium and magnesium alloy powders: a review[J]. Metals, 7, 2(2016).

[14] Pawlak A, Rosienkiewicz M, Chlebus E. Design of experiments approach in AZ31 powder selective laser melting process optimization[J]. Archives of Civil and Mechanical Engineering, 17, 9-18(2017).

[15] Wei K W, Gao M, Wang Z M et al. Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy[J]. Materials Science and Engineering: A, 611, 212-222(2014).

[16] Zhu Z, Zhang M, Chen C. Effect of selective laser melting on microstructure and properties of AZ91D alloy[J]. Materialwissenschaft Und Werkstofftechnik, 50, 1484-1494(2019).

[17] Niu X M, Shen H Y, Fu J Z et al. Effective control of microstructure evolution in AZ91D magnesium alloy by SiC nanoparticles in laser powder-bed fusion[J]. Materials & Design, 206, 109787(2021).

[18] Liu S, Yang W S, Shi X et al. Influence of laser process parameters on the densification, microstructure, and mechanical properties of a selective laser melted AZ61 magnesium alloy[J]. Journal of Alloys and Compounds, 808, 151160(2019).

[19] Schmid D, Renza J, Zaeh M F et al. Process influences on laser-beam melting of the magnesium alloy AZ91[J]. Physics Procedia, 83, 927-936(2016).

[20] Wu J J, Wang L Z. Selective laser melting manufactured CNTs/AZ31B composites: Heat transfer and vaporized porosity evolution[J]. Journal of Materials Research, 33, 2752-2762(2018).

[21] Wu C L, Zai W, Man H C. Additive manufacturing of ZK60 magnesium alloy by selective laser melting: Parameter optimization, microstructure and biodegradability[J]. Materials Today Communications, 26, 101922(2021).

[22] Xie B, Zhao M C, Tao J X et al. Comparison of the biodegradation of ZK30 subjected to solid solution treating and selective laser melting[J]. Journal of Materials Research and Technology, 10, 722-729(2021).

[23] Liu J G, Yin B Z, Sun Z R et al. Hot cracking in ZK60 magnesium alloy produced by laser powder bed fusion process[J]. Materials Letters, 301, 130283(2021).

[24] Wei K W, Wang Z M, Zeng X Y. Influence of element vaporization on formability, composition, microstructure, and mechanical performance of the selective laser melted Mg‒Zn‒Zr components[J]. Materials Letters, 156, 187-190(2015).

[25] Liang J W, Lei Z L, Chen Y B et al. Mechanical properties of selective laser melted ZK60 alloy enhanced by nanoscale precipitates with core-shell structure[J]. Materials Letters, 263, 127232(2020).

[26] Niu X M, Shen H Y, Xu G H et al. Effect of aluminium content and processing parameters on the microstructure and mechanical properties of laser powder-bed fused magnesium-aluminium (0, 3, 6, 9wt%) powder mixture[J]. Rapid Prototyping Journal, 25, 744-751(2019).

[27] Wei K W, Zeng X Y, Wang Z M et al. Selective laser melting of Mg-Zn binary alloys: effects of Zn content on densification behavior, microstructure, and mechanical property[J]. Materials Science and Engineering: A, 756, 226-236(2019).

[28] Hu Z H, Zhu H H, Zhang H et al. Experimental investigation on selective laser melting of 17-4PH stainless steel[J]. Optics & Laser Technology, 87, 17-25(2017).

[29] Wang Y L, Chen C P, Qi Y et al. Residual stress reduction and surface quality improvement of dual-laser powder bed fusion[J]. Additive Manufacturing, 71, 103565(2023).

[30] Wang Y, Shen Y F, Wang Z Y et al. Development of highly porous titanium scaffolds by selective laser melting[J]. Materials Letters, 64, 674-676(2010).

[31] Tan Q Y, Liu Y G, Fan Z Q et al. Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy[J]. Journal of Materials Science & Technology, 58, 34-45(2020).

[32] Chen Y, Chen H, Chen J Q et al. Numerical and experimental investigation on thermal behavior and microstructure during selective laser melting of high strength steel[J]. Journal of Manufacturing Processes, 57, 533-542(2020).

[33] Guo Q, Yan H G, Chen Z H et al. Effect of multiple forging process on microstructure and mechanical properties of magnesium alloy AZ80[J]. Acta Metallurgica Sinica, 42, 739-744(2006).