[1] [1] Yeganefar A, Niknam S A, Songmene V. Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451[J]. Transactions of the Canadian Society for Mechanical Engineering, 2019, 44(3): 427-439.

[2] [2] Yasir M K, Rehan U, Ahmed K K. Review of recent trends and developments in aluminium 7075 alloy and its metal matrix composites (MMCs) for aircraft applications[J]. Results in Engineering, 2023, 20: 385-392.

[3] [3] Bouzekova-Penkova A, Miteva A. Some aerospace applications of 7075 (B95) aluminium alloy[J]. Bulgarian Academy of Sciences-Space Research and Technology Institute-Aerospace Research in Bulgaria, 2022, 34: 165-179.

[4] [4] Harman A B, Rider A N. On the fatigue durability of clad 7075-T6 aluminium alloy bonded joints representative of aircraft repair[J]. International Journal of Adhesion and Adhesives, 2013, 44: 144-156.

[5] [5] Wenming T, Songmei L I, Jianhua L I U, et al. Preparation of bimodal grain size 7075 aviation aluminum alloys and their corrosion properties[J]. Chinese Journal of Aeronautics, 2017, 30(5): 1777-1788.

[6] [6] Yazid M Z A, Zainol A. Environmentally friendly approaches assisted machining of aluminum alloy 7075-T6 for automotive applications: a review[J]. International Journal of Integrated Engineering, 2019, 11(6): 18-26.

[7] [7] Rokni M R, Zarei-Hanzaki A, Roostaei A A, et al. An investigation into the hot deformation characteristics of 7075 aluminum alloy[J]. Materials & design, 2011, 32(4): 2339-2344.

[8] [8] Bharathi P, Sampath Kumar T. Effect of silicon carbide and boron carbide on mechanical and tribological properties of aluminium 7075 composites for automobile applications[J]. Silicon, 2023, 15(14): 6147-6171.

[9] [9] Liu M, Shan Z, Li X, et al. Hot tensile deformation behavior and microstructure evolution of 7075 aluminum alloy sheet[J]. Journal of Materials Research and Technology, 2023, 24: 724-736.

[11] [11] Yan X, Rong H, Fan W, et al. Effect and simulation of tensile stress on corrosion behavior of 7050 aluminum alloy in a simulated harsh marine environment[J]. Engineering Failure Analysis, 2024, 156: 107843.

[12] [12] Li Z, Yu H, Sun D. The tribocorrosion mechanism of aluminum alloy 7075-T6 in the deep ocean[J]. Corrosion Science, 2021, 183: 109306.

[13] [13] Lai H S, Jiang X, Li H, et al. Investigation of 7075 aluminum alloy corrosion in marine environment[J]. International Journal of Electrochemical Science, 2022, 17(5): 220559.

[14] [14] Hayat F. Electron beam welding of 7075 aluminum alloy: microstructure and fracture properties[J]. Engineering Science and Technology, an International Journal, 2022, 34: 101093.

[15] [15] Hua L, Hu X, Han X. Microstructure evolution of annealed 7075 aluminum alloy and its influence on room-temperature plasticity[J]. Materials & Design, 2020, 196: 109192.

[16] [16] Cai S W, He Y, Song R G. Study on the strengthening mechanism of two-stage double-peaks aging in 7075 aluminum alloy[J]. Transactions of the Indian Institute of Metals, 2020, 73: 109-117.

[17] [17] Du Z, Deng Z, Xiao A, et al. Effect of the aging process on the micro-structure & properties of 7075 aluminum alloy using electromagnetic bulging[J]. Journal of Manufacturing Processes, 2021, 70: 15-23.

[18] [18] Lin R, Liu B, Zhang J, et al. Microstructure evolution and properties of 7075 aluminum alloy recycled from scrap aircraft aluminum alloys[J]. Journal of Materials Research and Technology, 2022, 19: 354-367.

[19] [19] Atabaki M M, Ma J, Liu W, et al. Hybrid laser/arc welding of advanced high strength steel to aluminum alloy by using structural transition insert[J]. Materials & Design, 2015, 75: 120-135.

[20] [20] Reschetnik W, Brggemann J P, Aydinz M E, et al. Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy[J]. Procedia Structural Integrity, 2016, 2: 3040-3048.

[21] [21] Kaufmann N, Imran M, Wischeropp T M, et al. Influence of process parameters on the quality of aluminium alloy EN AW 7075 using selective laser melting (SLM)[J]. Physics Procedia, 2016, 83: 918-926.

[22] [22] Karg M C H, Ahuja B, Wiesenmayer S, et al. Effects of process conditions on the mechanical behavior of aluminium wrought alloy EN AW-2219 (AlCu6Mn) additively manufactured by laser beam melting in powder bed[J]. Micromachines, 2017, 8(1): 23.

[23] [23] Koutny D, Palousek D, Pantelejev L, et al. Influence of scanning strategies on processing of aluminum alloy EN AW 2618 using selective laser melting[J]. Materials, 2018, 11(2): 298.

[24] [24] Qi T, Zhu H, Zhang H, et al. Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode[J]. Materials & Design, 2017, 135: 257-266.

[25] [25] Mauduit A, Pillot S, Gransac H. Study of the suitability of aluminum alloys for additive manufacturing by laser powder bed fusion[J]. UPB Sci. Bull. Ser. B Chem. Mater. Sci, 2017, 79: 219-238.

[26] [26] Otani Y, Sasaki S. Effects of the addition of silicon to 7075 aluminum alloy on microstructure, mechanical properties, and selective laser melting processability[J]. Materials Science and Engineering: A, 2020, 777: 139079.

[27] [27] Peng L, Jia-ying H, Huai-xue L, et al. Effect of heat treatment on microstructure, hardness and corrosion resistance of 7075 Al alloys fabricated by SLM[J]. Journal of Manufacturing Processes, 2020, 60: 578-585.

[28] [28] Schmidtke K, Palm F, Hawkins A, et al. Process and mechanical properties: applicability of a scandium modified Al-alloy for laser additive Manufacturing[J]. Physics Procedia, 2011, 123: 69-374.

[29] [29] Liu D, Wu D, Wang Y, et al. Enhanced high-temperature mechanical properties of laser-arc hybrid additive manufacturing of Al-Zn-Mg-Cu alloy via microstructure control[J]. Journal of Materials Science & Technology, 2024, 169: 220-234.

[30] [30] El Hassanin A, Manco E, Squillace A, et al. Optimisation of the laser polishing for laser-powder bed fusion and electron beam-powder bed fusion Ti6Al4V surfaces[J]. Surface and Coatings Technology, 2024, 485: 130935.

[31] [31] Wang C, Sun Y, Chen G, et al. A simplified modelling approach for thermal behaviour analysis in hybrid plasma arclaser additive manufacturing[J]. International Journal of Heat and Mass Transfer, 2022, 195: 123157.

[32] [32] Wang C, Suder W, Ding J, et al. Parametric study of melt pool geometry in hybrid plasma arc-laser melting process for additive manufacturing application[J]. Welding in the World, 2023, 67(4): 923-934.

[34] [34] Faraji A H, Goodarzi M, Seyedein S H, et al. Numerical modeling of heat transfer and fluid flow in hybrid laser-TIG welding of aluminum alloy AA6082[J]. The International Journal of Advanced Manufacturing Technology, 2015, 77: 2067-2082.

[35] [35] Gong M, Lu Y, Zhao S, et al. Fabricating exceptionally efficiency and mechanically superior entity through optimized deposition strategy in oscillating laser-arc hybrid additive manufacturing[J]. Optics and Laser Technology, 2024, 179: 111372-111372.

[36] [36] Dixit S, Liu S. Laser additive manufacturing of high-strength aluminum alloys: challenges and strategies[J]. Journal of Manufacturing and Materials Processing, 2022, 6(6): 156.

[37] [37] Zhu Y, Mu W, Cai Y, et al. A novel high-efficient welding technology with rotating arc assisted by laser and its application for cryogenic steels[J]. Journal of Manufacturing Processes, 2021, 68: 1134-1146.

[38] [38] Yu J, Cai C, Xie J, et al. Keyhole stability, arc behavior, and molten pool flow in narrow-gap oscillating laser-arc hybrid welding of titanium alloy[J]. International Journal of Heat and Mass Transfer, 2024, 220: 124922.

[39] [39] Chen Y, Fu J, Zhou L, et al. Effect of heat treatment on microstructure and mechanical properties of titanium alloy fabricated by laser-arc hybrid additive manufacturing[J]. Coatings, 2024, 14(5): 614.

[40] [40] Chen M, Liu L. Study on attraction of laser to arc plasma in laser-TIG hybrid welding on magnesium alloy[J]. IEEE Transactions on Plasma Science, 2011, 39(4): 1104-1109.

[41] [41] Liu L, Chen M. Interactions between laser and arc plasma during laser-arc hybrid welding of magnesium alloy[J]. Optics and Lasers in Engineering, 2011, 49(9-10): 1224-1231.

[42] [42] Liu L M, Yuan S T, Li C B. Effect of relative location of laser beam and TIG arc in different hybrid welding modes[J]. Science and Technology of Welding and Joining, 2012, 17(6): 441-446.

[43] [43] Liu H, Hao K, Xu L, et al. Effect of arc mode on laserarc hybrid additive manufacturing of Al-Cu alloy: Pore defects, microstructure and mechanical properties[J]. Materials Science and Engineering: A, 2024, 891: 146022.

[45] [45] Liu D, Wu D, Wang R, et al. Formation mechanism of Al-Zn-Mg-Cu alloy fabricated by laser-arc hybrid additive manufacturing: Microstructure evaluation and mechanical properties[J]. Additive Manufacturing, 2022, 50: 102554.

[46] [46] Liu D, Wu D, Ge C, et al. Superior strength of laser-arc hybrid additive manufactured Al-Zn-Mg-Cu alloy enabled by a tunable microstructure[J]. Additive Manufacturing, 2023, 68: 103526.

[47] [47] Ma G, Luo X, Liu D, et al. 7075 Aluminum alloy welded by laser-TIG hybrid with homogeneous filler wire: Microstructure evaluation and molten pool behavior[J]. Optics & Laser Technology, 2024, 169: 110059.

[49] [49] Zhu B, Zhao Z, Zou J, et al. The influence of the arrangement for fiber laser and TIG on the hybrid welding process[J]. Optics & Laser Technology, 2024, 174: 110564.

[50] [50] Song G, Wang Z, Liu Z, et al. Effect of partial rolling on the microstructure and mechanical properties of laser-TIG hybrid welded joints of 7075-T6 aluminum alloy[J]. The International Journal of Advanced Manufacturing Technology, 2022, 121(1): 589-599.

[52] [52] Yan S, Nie Y, Zhu Z, et al. Characteristics of microstructure and fatigue resistance of hybrid fiber laser-MIG welded Al-Mg alloy joints[J]. Applied surface science, 2014, 298: 12-18.

[53] [53] Yan S, Chen H, Zhu Z, et al. Hybrid laser-metal inert gas welding of Al-Mg-Si alloy joints: microstructure and mechanical properties[J]. Materials & Design, 2014, 61: 160-167.

[54] [54] Shibata K, Sakamoto H, Iwase T. Laser-MIG Hybrid Welding of Aluminium Alloys[J]. Welding in the World, 2006, 50(1-2): 28-34.

[55] [55] Guo T, Hui C, Xiaoyi Y, et al. Effects of different welding process on the electronic temperature of plasma and weld shape during laser-MIG hybrid welding of A7N01P-T4 aluminum alloy[J]. Journal of Laser Applications, 2018, 30(2): 022002-022002.

[56] [56] Zhang Z, Sun C, Xu X, et al. Surface quality and forming characteristics of thin-wall aluminium alloy parts manufactured by laser assisted MIG arc additive manufacturing[J]. International Journal of Lightweight Materials and Manufacture, 2018, 1(2): 89-95.

[57] [57] Zhang D, Ran Q, Zhu P, et al. Temperature and stress field analysis of 7075 aluminum alloy laser-MIG composite welding[J]. Materials & Design, 2023, 70: 87-92.

[58] [58] Liu J, Pan W, Liu Y, et al. Effect of graphene on corrosion resistance of micro - arc oxidation coatings on 6061/7075 dissimilar laser-MIG hybrid welded joint[J]. Materials Research Express, 2019, 6(6): 066521-066521.

[59] [59] Zhou Q, Liu F, Li J, et al. Detection of butt weld of laser-MIG hybrid welding of thin-walled profile for high-speed train[J]. Railway Sciences, 2022, 1(1): 98-113.

[60] [60] Yin Z, Xiping S, Liyan C, et al. Fatigue lifetime of laser-MIG hybrid welded joint of 7075-T6 aluminum alloy by insitu observation[J]. Rare Metal Materials and Engineering, 2017, 46(9): 2411-2416.