[1] E. F. Bernstein, J. F. Sanzo, J. Y. Wang et al. Low-fluence treatment with a novel fractionated 2910-nm fiber laser improves photodamage. Laser Surg. Med., 55, 35(2023).

[2] M. M. Selim, J. A. Lowery, H. S. Maredia et al. Clinical evaluation of a new fractional ablative 2910 nm erbium laser on photodamaged skin: a pilot study. Laser Surg. Med., 55, 715(2023).

[3] R. Guidotti, E. Merigo, C. Fornaini et al. Er:YAG 2940-nm laser fiber in endodontic treatment: a help in removing smear layer. Laser Med. Sci., 29, 69(2014).

[4] J. Qiu, J. Teichman, T. Wang et al. Comparison of fluoride and sapphire optical fibers for Er: YAG laser lithotripsy. J. Biophoton., 3, 277(2010).

[5] T. Klink, G. Schlunck, W. E. Lieb et al. Long-term results of Erbium YAG-laser-assisted deep sclerectomy. Eye, 22, 370(2008).

[6] A. Zajac, M. Skorczakowski, J. Swiderski et al. Electrooptically Q-switched mid-infrared Er:YAG laser for medical applications. Opt. Express, 12, 5125(2004).

[7] J. Yang, L. Wang, X. Wu et al. High peak power Q-switched Er:YAG laser with two polarizers and its ablation performance for hard dental tissues. Opt. Express, 22, 15686(2014).

[8] F. Jobin, P. Paradis, Y. O. Aydin et al. Recent developments in lanthanide-doped mid-infrared fluoride fiber lasers [Invited]. Opt. Express, 30, 8615(2022).

[9] Y. O. Aydin, V. Fortin, R. Vallée et al. Towards power scaling of 2.8 µm fiber lasers. Opt. Lett., 43, 4542(2018).

[10] M. R. Majewski, S. D. Jackson. Highly efficient mid-infrared dysprosium fiber laser. Opt. Lett., 41, 2173(2016).

[11] S. Crawford, D. D. Hudson, S. D. Jackson. High-power broadly tunable 3 µm fiber laser for the measurement of optical fiber loss. IEEE Photon. J., 7, 1502309(2015).

[12] S. Zhou, H. Luo, Y. Wang et al. Numerical design of an efficient Ho3+-doped InF3 fiber laser at ∼3.2 µm. J. Electron. Sci. Technol., 22, 100261(2024).

[13] H. Luo, J. Shi, J. Chen et al. Towards high-power and -efficiency ∼2.8 µm lasing: lightly-erbium-doped ZrF4 fiber laser pumped at ∼1.7 µm. IEEE J. Lightw. Technol., 42, 316(2024).

[14] H. Luo, J. Li, J. Xie et al. High average power and energy microsecond pulse generation from an erbium-doped fluoride fiber MOPA system. Opt. Express, 24, 29022(2016).

[15] P. Pascal, V. Fortin, Y. O. Aydin et al. 10 W-level gain-switched all-fiber laser at 2.8 µm. Opt. Lett., 43, 3196(2018).

[16] S. Duval, M. Bernier, V. Fortin et al. Femtosecond fiber lasers reach the mid-infrared. Optica, 2, 623(2015).

[17] S. Lukasz, L. Pajewski, S. Lamrini et al. High peak power Q-switched Er: ZBLAN fiber laser. IEEE J. Lightw. Technol., 39, 6572(2021).

[18] Y. Shen, Y. Wang, F. Zhu et al. 200 µJ, 13 ns Er:ZBLAN mid-infrared fiber laser actively Q-switched by an electro-optic modulator. Opt. Lett., 46, 1141(2021).

[19] Y. Shen, Y. Wang, K. Luan et al. High peak power actively Q-switched mid-infrared fiber lasers at 3 µm. Appl. Phys. B, 123, 105(2017).

[20] S. Lamrini, K. Scholle, M. Schäfer et al. High-energy Q-switched Er:ZBLAN fibre laser at 2.79 µm. 2015 European Conference on Lasers and Electro-Optics-European Quantum Electronics Conference, Conf. CJ_7_2(2015).

[21] W. Du, Y. Bai, Y. Cui et al. Mid-IR pulse amplification to ∼millijoule energies in a single transverse mode using large core Er: ZBLAN fibers operating at 2.8 µm. Opt. Express, 30, 46170(2022).

[22] V. Fortin, M. Bernier, S. T. Bah et al. 30 W fluoride glass all-fiber laser at 2.94 μm. Opt. Lett., 40, 2882(2015).

[23] S. Tokita, M. Murakami, S. Shimizu et al. 12 W Q-switched Er:ZBLAN fiber laser at 2.8 μm. Opt. Lett., 36, 2812(2011).

[24] J. Li, Y. Yang, D. D. Hudson et al. A tunable Q-switched Ho3+-doped fluoride fiber laser. Laser Phys. Lett., 10, 045107(2013).

[25] T. Hu, D. D. Hudson, S. D. Jackson. High peak power actively Q-switched Ho3+, Pr3+-co-doped fluoride fibre laser. IEEE Electron. Lett., 49, 766(2013).

[26] L. Pajewski, L. Sójka, S. Lamrini et al. Experimental investigation of actively Q-switched Dy3+ doped fluoride single mode fiber laser operating near 3 µm. IEEE J. Lightw. Technol., 42, 809(2024).

[27] L. Sójka, L. Pajewski, M. Popenda et al. Experimental investigation of mid-infrared laser action from Dy3+-doped fluorozirconate fiber. IEEE Photon. Technol. Lett., 30, 1083(2018).

[28] M. Z. Amin, M. R. Majewski, R. I. Woodward et al. Novel near-infrared pump wavelengths for dysprosium fiber lasers. IEEE J. Lightw.Technol., 38, 5801(2020).

[29] J. Wang, X. Zhu, R. A. Norwood et al. Beyond 3 µm Dy3+/Er3+ co-doped ZBLAN fiber lasers pumped by 976 nm laser diode. Appl. Phys. Lett., 118, 151101(2021).

[30] X. Zhao, H. Luo. Efficient watt-level fluoride fiber laser beyond 3 µm enabled by direct diode pumping. Opt. Laser Technol., 181, 111715(2024).

[31] H. Luo, Y. Wang, J. Chen et al. Red-diode-clad-pumped Er3+/Dy3+ codoped ZrF4 fiber: a promising mid-infrared laser platform. Opt. Lett., 47, 5313(2022).

[32] X. Zhao, H. Luo, J. Li et al. Tunable high energy pulse generation in the range of 2.9–3.6 µm enabled by an actively Q switched Er3+/Dy3+ codoped fluoride fiber oscillator. Opt. Lett., 49, 3721(2024).

[33] R. I. Woodward, M. Majewski, N. Macadam et al. Q-switched Dy:ZBLAN fiber lasers beyond 3 µm: Comparison of pulse generation using acousto-optic modulation and inkjet-printed black phosphorus. Opt. Express, 27, 15032(2019).

[34] A. E. Ahmed, M. Hamed Khater, H. M. Al Wafaey. Role of fractional erbium YAG laser 2940 nm in treatment of eye wrinkles. Ann. Rom. Soc. Cell. Biol., 25, 19103(2021).

[35] T. Dumore, D. Fried. Selective ablation of orthodontic composite by using sub-microsecond IR laser pulses with optical feedback. Laser Surg. Med., 27, 103(2000).

[36] K. Stock, R. Diebolder, F. Hausladen et al. Primary investigations on the potential of a novel diode pumped Er:YAG laser system for bone surgery. Proc. SPIE, 8565, 756(2013).

[37] J. P. Rocca, M. Zhaoa, C. Fornaini et al. Effect of laser irradiation on aphthae pain management: a four different wavelengths comparison. J. Photoch. Photobio. B, 189, 1(2018).

[38] D. Fried, R. Shori, C. Duhn. Backspallation due to ablative recoil generated during Q-switched Er:YAG abaltion of dental enamel. Proc. SPIE, 248, 78(1998).

[39] K. Stock, F. Hausladen, R. Hibst. Investigations on the potential of a novel diode pumped Er:YAG laser system for dental applications. Proc. SPIE, 8208, 55(2012).

[40] Y. Wang, H. Luo, H. Gong et al. Watt-level and tunable operations of 3 µm-class dysprosium ZrF4 fiber laser pumped at 1.69 µm. IEEE Photon. Technol. Lett., 34, 737(2022).

[41] M. Pawliszewska, M. R. Majewski, S. D. Jackson. Electronically tunable picosecond pulse generation from Ho3+-doped fluoride fiber laser using frequency-shifted feedback. Opt. Lett., 45, 5808(2020).

[42] X. Zhang, W. Li, J. Li et al. Mid-infrared all-fiber gain-switched pulsed laser at 3 µm. Opto-Electron. Adv., 3, 190032(2020).

[43] H. Luo, Y. Xu, J. Li et al. Gain-switched dysprosium fiber laser tunable from 2.8 to 3.1 µm. Opt. Express, 27, 27151(2019).