Chinese Journal of Ship Research, Volume. 16, Issue 6, 201(2021)

Dynamic and tribological coupling analysis of journal bearing based on dynamic substructure

Xin YANG1, Genxiang GU1, Sicong SUN2, Jianming ZHOU1, and Saili LI1
Author Affiliations
  • 1Shanghai Marine Diesel Engine Research Institute, Shanghai 200090
  • 2School of Energy and Power Engineering, Wuhan University of Technology, Wuhan 430063, China
  • show less
    Figures & Tables(17)
    [in Chinese]
    [in Chinese]
    [in Chinese]
    [in Chinese]
    [in Chinese]
    [in Chinese]
    [in Chinese]
    [in Chinese]
    [in Chinese]
    [in Chinese]
    [in Chinese]
    • Table 1. Main parameters of bearing wear test bed

      View table
      View in Article

      Table 1. Main parameters of bearing wear test bed

      参数数值参数数值
      轴承宽度b/mm29油孔位置/(°)45
      轴颈直径/mm52.68油孔直径/mm4
      径向(半径)间隙c/μm250进油温度/℃55
      支撑轴瓦1(半径)间隙c1/μm50进油压力/bar9
      支撑轴瓦2(半径)间隙c2/μm50轴颈表面粗糙度/μm0.4
      润滑油牌号10W-30轴瓦表面粗糙度/μm0.5
    • Table 2. Finite element model and condensed model of main parts

      View table
      View in Article

      Table 2. Finite element model and condensed model of main parts

      零部件有限元模型缩减模型
      偏心轴
      支撑轴承座
      连杆
    • Table 3. Comparison of modal frequency between finite element models and condensed model of eccentric shaft

      View table
      View in Article

      Table 3. Comparison of modal frequency between finite element models and condensed model of eccentric shaft

      阶数频率/Hz误差/%振型
      有限元模型缩减模型
      11 708.51 710.50.117YZ 面内弯曲模态
      21 718.71 721.70.175XZ 面内弯曲模态
      34 021.64 020.4−0.030扭转模态
      44 332.64 344.50.275YZ 面内弯曲模态
      54 360.84 362.90.048XZ 面内弯曲模态
    • Table 4. Comparison of modal frequency between finite element model and condensed model of connecting rod

      View table
      View in Article

      Table 4. Comparison of modal frequency between finite element model and condensed model of connecting rod

      阶数频率/Hz误差/%振型
      有限元模型缩减模型
      1963.5963.23−0.03XZ 面内弯曲模态
      21 213.61 212.4−0.10扭转模态
      31 558.61 554.6−0.26YZ 面内弯曲模态
      41 816.41 814.4−0.11小端局部模态
      52 644.12 645.10.038扭转模态
    • Table 5. Main test parameters of bearing wear test bed

      View table
      View in Article

      Table 5. Main test parameters of bearing wear test bed

      传感器信号类型被测对象
      位移传感器位移轴心轨迹
      扭矩仪扭矩摩擦功耗
      温度传感器温度瓦背温度
      压力传感器压力供油压力
    • Table 6. EHD calculation results of diffrent bearings of the test bed

      View table
      View in Article

      Table 6. EHD calculation results of diffrent bearings of the test bed

      轴承号性能参数
      pmax /MPahmin /μmλγ/%Wm /W
      12.8720.8732.610241.74
      216.518.0712.610318.92
      3106.781.382.031.42486.89
      416.498.0712.610319.03
      52.6820.8932.640248.67
    Tools

    Get Citation

    Copy Citation Text

    Xin YANG, Genxiang GU, Sicong SUN, Jianming ZHOU, Saili LI. Dynamic and tribological coupling analysis of journal bearing based on dynamic substructure[J]. Chinese Journal of Ship Research, 2021, 16(6): 201

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Marine Machinery, Electrical Equipment and Automation

    Received: Jan. 14, 2021

    Accepted: --

    Published Online: Mar. 28, 2025

    The Author Email:

    DOI:10.19693/j.issn.1673-3185.02265

    Topics