[1] Zhu Y H, Peng W, Xu R N et al. Review on active thermal protection and its heat transfer for airbreathing hypersonic vehicles[J]. Chinese Journal of Aeronautics, 31, 1929-1953(2018).

[2] Wang J M, Li L Q, Peng G C et al. Microstructures and properties of weld bead of 10Ni5CrMoV steel obtained with laser welding at vacuum[J]. Chinese Journal of Lasers, 46, 0402005(2019).

[3] Zhao L, Han X, Zou J L et al. Research on formation process of keyhole during fiber laser deep penetration welding[J]. Laser & Optoelectronics Progress, 57, 071402(2020).

[4] Du W Z, Huang T, Cao Z et al. Galvanometer scanning laser-micro-welding of AISI304 stainless-steel foil[J]. Chinese Journal of Lasers, 46, 1102006(2019).

[5] Khurshid M, Leitner M, Barsoum Z et al. Residual stress state induced by high frequency mechanical impact treatment in different steel grades:numerical and experimental study[J]. International Journal of Mechanical Sciences, 123, 34-42(2017).

[6] Wang Z, Lu Y, Sun G et al. Effect of ultra-sonic peening on laser-arc hybrid welded NV E690 steel[J]. Journal of Laser Applications, 30, 032403(2018).

[7] Yuan K L, Sumi Y. Simulation of residual stress and fatigue strength of welded joints under the effects of ultrasonic impact treatment (UIT)[J]. International Journal of Fatigue, 92, 321-332(2016).

[8] Shalvandi M, Hojjat Y, Abdullah A et al. Influence of ultrasonic stress relief on stainless steel 316 specimens:a comparison with thermal stress relief[J]. Materials & Design, 46, 713-723(2013).

[9] Li N, Sun J, Zhang G et al. Effect of ultrasonic impact peening on Ti-6Al-4V laser deposition shaping[J]. Journal of Laser Applications, 29, 022505(2017).

[10] Qu H T. Investigation of ultrasonic impact equipment during welding and study on ultrasonic impact effect[D]. Harbin: Harbin Institute of Technology(2014).

[11] Chen Q H, Lin S B, Yang C L et al. Effect of ultrasonic impact during welding on microstructures and mechanical properties of TIG welded joint of 2A14 aluminum alloy[J]. The Chinese Journal of Nonferrous Metals, 26, 2071-2077(2016).

[12] Zhao W. Experimental and simulation study on eliminating welding residual stress and deformatiaon by real time ultrasonic impact treament[D]. Harbin: Harbin Institute of Technology(2017).

[13] Liang H, Kan Y, Jiang Y L et al. Mechanical properties of laser overlap welded joints of stainless steel sheets[J]. Chinese Journal of Lasers, 45, 0602001(2018).

[14] Yu X, Luo J Q, Xiao X S et al. Research progress of high-power ultrafast fiber lasers[J]. Chinese Journal of Lasers, 46, 0508007(2019).

[15] Liu E Z, Yao C W, Xie Y L et al. Deformation mechanism of SUS304 austenitic stainless steel at weldless side in partial penetration laser welding[J]. Chinese Journal of Lasers, 46, 0402004(2019).

[16] Liu Z, Sui S, Yuan Z H et al. Microstructure and tensile properties of high-deposition-rate laser metal deposited GH4169 alloy[J]. Chinese Journal of Lasers, 46, 0102004(2019).

[17] Fahlström K, Andersson O, Melander A et al. Correlation between laser welding sequence and distortions for thin sheet structures[J]. Science and Technology of Welding and Joining, 22, 150-156(2017).