[2] [2] M Shen, P Zhao, Y Gu, et al. High vacuum arc ion plating NiCrAlY coatings: Microstructure and oxidation behavior［C］. Corros. Sci., 2015, 94: 294-304.

[5] [5] Lin J, Sproul W D, Moore J J, et al. High rate deposition of thick CrN and CrN coatings using modulated pulse power (MPP) magnetron sputtering［J］. Surface & Coatings Technology, 2010, 205(10): 3226-3234.

[6] [6] Xu CZ, Jiang S M, Bao Z B, et al. Isothermal oxidation behavior of a gradient NiCoCrAlSiY coating deposited by arc ion plating on a Ni-based single crystal superalloy［J］. Corrosion Science, 2009, 51(6): 1467-1474.

[7] [7] Mohagheghian A, Ayagh K, Godini K, et al. Photocatalytic reduction of Cr(VI) from synthetic, real drinking waters and electroplating wastewater by synthesized amino-functionalized Fe3O4-WO3 nanoparticles by visible light［J］. Journal of Industrial and Engineering Chemistry, 2018, 59: 169-183.

[8] [8] Ang C, Kemery C, Katoh Y. Electroplating chromium on CVD SiC and SiCf-SiC advancedcladding via PyC compatibility coating［J］. Journal of Nuclear Materials, 2018, 503: 245-249.

[9] [9] Zhong W, Mouche P A, Heuser B J. Response of Cr and Cr-Al coatings on Zircaloy-2 to high temperature steam［J］. Journal of Nuclear Materials, 2017, 498: 137-148.

[10] [10] Zhao L, Ding Z, Sima J, et al. Development of phosphate rock integrated with iron amendment for simultaneous immobilization of Zn and Cr(VI) in an electroplating contaminated soil［J］. Chemosphere, 2017, 182: 15-21.

[11] [11] Tas MO, Banerji A, Lou M, et al. Roles of mirror-like surface finish and DLC coated piston ringson increasing scuffing resistance of cast iron cylinder liners［J］. Wear, 2017, 376-377: 1558-1569.

[14] [14] Archard J F. Contact and rubbing of flat surfaces［J］. Journal of Applied Physics, 1953, 24(8): 981-988.

[15] [15] Tomanik E, Mansori M E, Souza R, et al. Effect of waviness and roughness on cylinder liner friction［J］. Tribol. Int., 2018(120): 547-555.

[16] [16] Leyland A, Matthews A. On the significance of the H/E, ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour［J］. Wear, 2000, 246(1): 1.