[1] Lu B H, Li D C. Development of the additive manufacturing (3D printing) technology[J]. Machine Building & Automation, 42, 1-4(2013).

[2] Yang Y Q, Chen J, Song Z H et al. Current status and progress on technology of selective laser melting of metal parts[J]. Laser & Optoelectronics Progress, 55, 011401(2018).

[3] Wang H M. Materials' fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 35, 2690-3698(2014).

[4] Chen J L, Dong P, Zhang K et al[J]. Potential applications of additive manufacture in metal material for aerospace applications Electromachining & Mould, 2014, 66-69.

[5] Zhang L C, Attar H, Calin M et al. Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications[J]. Materials & Processing Report, 31, 66-76(2016). http://www.tandfonline.com/doi/abs/10.1179/1753555715Y.0000000076

[6] Zhao Y H, Wang Z G, Long Y et al. Research on in fluential factor of temperature of molten pool of Inconel 625 superalloy by laser additive manufacturing[J]. Applied Laser, 35, 137-144(2015).

[7] Zhang X W. Application of metal additive manufacturing in aero-engine[J]. Journal of Aerospace Power, 31, 10-16(2016).

[8] Liu R, Wang Z, Sparks T et al. Aerospace applications of laser additive manufacturing[M]. Holland: Elsevier, 351-371(2017).

[9] Wu K, Zhang J L, Wu B et al. Research and development of Ni-based superalloy fabricated by laser additive manufacturing technology[J]. Journal of Iron and Steel Research, 29, 953-959(2017).

[10] Su Y D, Wang X M, Wu B et al. Application potential of 4D printing technology in development of aircraft[J]. Journal of Aeronautical Materials, 38, 59-69(2018).

[11] Yu Y. ShiT C, Sun F F, et al. Study and application status of additive manufacturing of typical inorganic non-metallic materials[J]. Materials Review, 30, 119-129(2016).

[12] Duan M S, Wu F, Liu R X et al. Application of laser additive manufacturing technology in ophthalmology[J]. Laser & Optoelectronics Progress, 55, 011406(2018).

[13] Lusquiños F, Val J D, Arias-González F et al. Bioceramic 3D implants produced by laser assisted additive manufacturing[J]. Physics Procedia, 56, 309-316(2014). http://www.sciencedirect.com/science/article/pii/S1875389214003216

[14] Khorasani A M. Machining of spherical component fabricated by selected laser melting, part II: Application of Ti in biomedical[D]. Victoria: Deakin University(2017).

[15] Ma Z S, Chen G S, Ma D X et al. Metal additive manufacturing technologies used in equipment emergency support[J]. Ordnance Material Science and Engineering, 39, 119-124(2016).

[16] Wang M, Lin X, Huang W. Laser additive manufacture of titanium alloys[J]. Materials & Processing Report, 31, 90-97(2015). http://www.tandfonline.com/doi/abs/10.1179/1753555715Y.0000000079

[17] Huang C P, Huang S W, Liu F C[J]. Metal material additive manufacturing technology Metal Working (Thermal processing), 2016, 34-38.

[18] Wang Y Q, Shen J X, Wu H Q. Application and research status of alternative materials for 3D-printing technology[J]. Journal of Aeronautical Materials, 36, 89-98(2016).

[19] Rosa B, Mognol P, Hascoët J. Laser polishing of additive laser manufacturing surfaces[J]. Journal of Laser Applications, 27, S29102(2015). http://scitation.aip.org/content/lia/journal/jla/27/s2/10.2351/1.4906385

[20] Özel T, Altay A, Donmez A et al. Surface topography investigations on nickel alloy 625 fabricated via laser powder bed fusion[J]. The International Journal of Advanced Manufacturing Technology, 94, 4451-4458(2018). http://link.springer.com/article/10.1007%2Fs00170-017-1187-z

[21] Rosa B, Brient A, Samper S et al. Influence of additive laser manufacturing parameters on surface using density of partially melted particles[J]. Surface Topography: Metrology and Properties, 4, 045002(2016). http://adsabs.harvard.edu/abs/2016SuTMP...4d5002R

[22] Wu A S, Brown D W, Kumar M et al. An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel[J]. Metallurgical & Materials Transactions A, 45, 6260-6270(2014). http://link.springer.com/article/10.1007/s11661-014-2549-x

[23] Zhou X, Zhou Y, Wei Q S et al. Study on cracking mechanism and inhibiting process of near α Titanium alloy formed by SLM[J]. China Mechanical Engineering, 26, 2816-2820(2015).

[24] Shao Y C, Chen C J, Zhang M et al. Research on crack issue of Deloro 40Ni alloys prototype fabricated by laser additive manufacturing[J]. Applied Laser, 36, 397-402(2016).

[25] Shishkovsky I, Saphronov V. Peculiarities of selective laser melting process for permalloy powder[J]. Materials Letters, 171, 208-211(2016). http://www.sciencedirect.com/science/article/pii/S0167577X16302567

[26] Demir A G, Previtali B. Investigation of remelting and preheating in SLM of 18Ni300 maraging steel as corrective and preventive measures for porosity reduction[J]. International Journal of Advanced Manufacturing Technology, 93, 2697-2709(2017). http://link.springer.com/article/10.1007/s00170-017-0697-z

[27] Sears J W. Direct laser powder deposition-'State of the Art'. [C]∥Proceedings of the 1999 TMS Fall Extraction and Processing Meeting, November 1, 1999, San Diego, California. [S. l. : s. n. ], 213-226(1999).

[28] Beaman J J. -07-02[P]. Deckard C R. Selective laser sintering with assisted powder handling: US5053090A.(1990).

[29] Kruth J P. Froyen L, van Vaerenbergh J, et al. Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 149, 616-622(2004).

[30] Vrancken B, Cain V, Knutsen R et al. Residual stress via the contour method in compact tension specimens produced via selective laser melting[J]. Scripta Materialia, 87, 29-32(2014). http://www.sciencedirect.com/science/article/pii/S1359646214002164

[31] Mercelis P, Kruth J P. Residual stresses in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 12, 254-265(2006). http://www.tandfonline.com/servlet/linkout?suffix=CIT0029&dbid=16&doi=10.1080%2F14686996.2018.1455154&key=10.1108%2F13552540610707013

[32] Alimardani M, Toyserkani E, Huissoon J P et al. On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: an experimental-numerical investigation[J]. Optics & Lasers in Engineering, 47, 1160-1168(2009). http://www.sciencedirect.com/science/article/pii/S0143816609001535

[33] Wei L, Lin X, Wang M et al[J]. Numerical simulation on laser additive manufacturing process for metal components Aeronautical Manufacturing Technology, 2017, 16-25.

[34] Wu J J, Wang L Z, An X G. Numerical analysis of residual stress evolution of AlSi10Mg manufactured by selective laser melting[J]. Optik, 137, 65-78(2017). http://www.sciencedirect.com/science/article/pii/S0030402617302036

[35] Dai D H, Gu D D. Tailoring surface quality through mass and momentum transfer modeling using a volume of fluid method in selective laser melting of TiC/AlSi10Mg powder[J]. International Journal of Machine Tools and Manufacture, 88, 95-107(2015). http://www.sciencedirect.com/science/article/pii/S0890695514001424

[36] Bartkowiak K, Ullrich S, Frick T et al. New developments of laser processing aluminium alloys via additive manufacturing technique[J]. Physics Procedia, 12, 393-401(2011). http://www.sciencedirect.com/science/article/pii/S1875389211001295

[37] Tillmann W, Schaak C, Nellesen J et al. Hot isostatic pressing of IN718 components manufactured by selective laser melting[J]. Additive Manufacturing, 13, 93-102(2017). http://www.sciencedirect.com/science/article/pii/S2214860416300495

[38] Zhang S Y, Lin X, Chen J et al. Influence of heat treatment on residual stress of Ti-6Al-4V alloy by laser solid forming[J]. Rare Metal Materials and Engineering, 38, 774-778(2009).

[39] Vilaro T, Colin C, Bartout J D et al. Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy[J]. Materials Science & Engineering A, 534, 446-451(2012). http://www.sciencedirect.com/science/article/pii/S0921509311013311

[40] Zhang S, Gui R Z, Wei Q S et al. Cracking behavior and formation mechanism of TC4 alloy formed by selective laser melting[J]. Journal of Mechanical Engineering, 49, 21-27(2013). http://en.cnki.com.cn/Article_en/CJFDTOTAL-JXXB201323004.htm

[41] Zhang J, Li S, Wei Q S et al. Cracking behavior and inhibiting process of Inconel 625 alloy formed by selective laser melting[J]. Chinese Journal of Rare Metals, 39, 961-966(2015).

[42] Lai Y B, Liu W J, Zhao J B et al. Experimental study on residual stress in titanium alloy laser additive manufacturing[J]. Applied Mechanics & Materials, 431, 20-26(2013). http://www.scientific.net/AMM.431.20

[43] Yang Q Y, Wu Y D, Sha F. Microstructure and mechanical properties of Inconel 625 alloy manufactured by selective laser melting[J]. Materials for Mechanical Engineering, 40, 83-87(2016).

[44] Amato K N, Gaytan S M, Murr L E et al. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting[J]. Acta Materialia, 60, 2229-2239(2012). http://www.sciencedirect.com/science/article/pii/S1359645411008949

[45] Wang Z M, Guan K, Gao M et al. The microstructure and mechanical properties of deposited-IN718 by selective laser melting[J]. Journal of Alloys & Compounds, 513, 518-523(2012). http://www.sciencedirect.com/science/article/pii/S0925838811020767

[46] Pröbstle M, Neumeier S, Hopfenmüller J et al. Superior creep strength of a nickel-based superalloy produced by selective laser melting[J]. Materials Science and Engineering: A, 674, 299-307(2016). http://www.sciencedirect.com/science/article/pii/S092150931630822X

[47] Yan S X, Dong S Y, Xu B S et al. Mechanics of removing residual stress of Fe314 cladding layers with laser shock processing[J]. Chinese Journal of Lasers, 40, 1003004(2013).

[48] Sun J, Zhao J F, Xie N et al[J]. Residual stress of laser melt cladding assisted by electromagnetic field Journal of Nanjing University of Aeronautics & Astronautics, 2017, 805-811.

[49] Ding J, Colegrove P, Mehnen J et al. Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts[J]. Computational Materials Science, 50, 3315-3322(2011). http://www.sciencedirect.com/science/article/pii/S092702561100365X

[50] Ding J, Colegrove P, Mehnen J et al. A computationally efficient finite element model of wire and arc additive manufacture[J]. International Journal of Advanced Manufacturing Technology, 70, 227-236(2014). http://link.springer.com/article/10.1007/s00170-013-5261-x

[51] Xu W, Brandt M, Sun S et al. Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition[J]. Acta Materialia, 85, 74-84(2015). http://www.sciencedirect.com/science/article/pii/S1359645414008817

[52] Qin L Y, Wang W, Yang G et al. Experimental study on ultrasonic-assisted laser metal deposition of Titanium alloy[J]. Chinese Journal of Lasers, 40, 0103001(2013).

[53] Wang T, Zhang A F, Liang S D et al. Research on as-deposited microstructures and properties of IN718 parts by ultrasonic vibration-assisted laser metal forming[J]. Chinese Journal of Lasers, 43, 1102005(2016).

[54] Yuan D, Gao H B, Sun X J et al. Methods and techniques for improving microstructure and performance of metal additively manufactured materials[J]. Aeronautical Manufacturing Technology, 61, 40-48(2018).

[55] Montazeri M, Ghaini F M. The liquation cracking behavior of IN738LC superalloy during low power Nd∶YAG pulsed laser welding[J]. Materials Characterization, 67, 65-73(2012). http://www.sciencedirect.com/science/article/pii/S1044580312000447

[56] Ojo O A. Intergranular liquation cracking in heat affected zone of a welded nickel based superalloy in as cast condition[J]. Materials Science and Technology, 23, 1149-1155(2007). http://www.tandfonline.com/doi/abs/10.1179/174328407X213323

[57] Song B, Dong S J, Zhang B C et al. Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V[J]. Materials & Design, 35, 120-125(2012). http://www.sciencedirect.com/science/article/pii/S0261306911006765

[58] Gu D D, Hagedorn Y C, Meiners W et al. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium[J]. Acta Materialia, 60, 3849-3860(2012). http://www.sciencedirect.com/science/article/pii/S1359645412002522

[59] Kone ná R, Kunz L, Nicoletto G et al. . Long fatigue crack growth in Inconel 718 produced by selective laser melting[J]. International Journal of Fatigue, 92, 499-506(2016). http://www.sciencedirect.com/science/article/pii/S0142112316300172

[60] Cloots M, Uggowitzer P J, Wegener K. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles[J]. Materials & Design, 89, 770-784(2016). http://www.sciencedirect.com/science/article/pii/S0264127515306055

[61] Cheng L Y, Zhang S, Wei Q S et al. Microstructure and mechanical properties of stainless steel and nano hydroxyapatite composites fabricated by selective laser melting[J]. The Chinese Journal of Nonferrous Metals, 24, 1510-1517(2014).

[62] Gu D D, Dai D H, Xia M J et al. Cross-scale physical mechanisms for structure and performance control of metal components processed by selective laser melting additive manufacturing[J]. Journal of Nanjing University of Aeronautics & Astronautics, 49, 645-652(2017).

[63] Hou H P, Liang Y C, He Y L et al. Microstructural evolution and tensile property of Hastelloy-X alloys produced by selective laser melting[J]. Chinese Journal of Lasers, 44, 0202007(2017).

[64] Liu K, Wang R, Qi H et al. Effects of HIP on microstructure and mechanical properties of K4536 alloy manufactured by SLM[J]. Journal of Aeronautical Materials, 38, 46-51(2018).

[65] Benedetti M, Fontanari V, Bandini M et al. Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: Mean stress and defect sensitivity[J]. International Journal of Fatigue, 107, 96-109(2018). http://www.sciencedirect.com/science/article/pii/S014211231730419X

[66] Shi F, Zhao J B, Wang Z G et al. Research on processing technology of superalloy K465 via laser additive manufacturing[J]. Mechanical Science and Technology for Aerospace Engineering, 36, 1298-1302(2017).

[67] Liu Z W, Hou C J, Wang L F et al[J]. Study on selective multi-laser beam melting technology Manufacturing Technology & Machine Tool, 2018, 56-59.

[68] Huang W D, Lin X. Research progress in laser solid forming of high performance metallic component[J]. Materials China, 29, 12-27, 49(2010).

[69] Liu Y S, Han P L, Hu S F et al[J]. Development of laser additive manufacturing with metallic materials and its application in aviation engines Aeronautical Manufacturing Technology, 2014, 62-67.

[70] Chen C Y, Deng Q L, Song J L[J]. The influence of ultrasonic vibration on the process of laser cladding Electromachining & Mould, 2005, 37-40.

[71] Fan X F, Zhou J, Qiu C J et al. Experimental study on surface characteristics of laser cladding layer regulated by high-frequency microforging[J]. Journal of Thermal Spray Technology, 20, 456-464(2011). http://onlinelibrary.wiley.com/resolve/reference/XREF?id=10.1007/s11666-010-9534-8

[72] Tolochko N K, Mozzharov S E, Yadroitsev I A et al. Balling processes during selective laser treatment of powders[J]. Rapid Prototyping Journal, 10, 78-87(2004). http://www.emeraldinsight.com/doi/full/10.1108/13552540410526953

[73] Yadroitsev I, Bertrand P, Smurov I. Parametric analysis of the selective laser melting process[J]. Applied Surface Science, 253, 8064-8069(2007). http://www.sciencedirect.com/science/article/pii/S0169433207003534

[74] Yadroitsev I, Gusarov A, Yadroitsava I et al. Single track formation in selective laser melting of metal powders[J]. Journal of Materials Processing Technology, 210, 1624-1631(2010). http://www.sciencedirect.com/science/article/pii/S0924013610001469

[75] Gu D D, Shen Y F. Balling phenomena in direct laser sintering of stainless steel powder: metallurgical mechanisms and control methods[J]. Materials & Design, 30, 2903-2910(2009). http://www.sciencedirect.com/science/article/pii/S0261306909000181

[76] Gu D D, Wang H Q, Zhang G Q. Selective laser melting additive manufacturing of Ti-based nanocomposites: the role of nanopowder[J]. Metallurgical and Materials Transactions A, 45, 464-476(2014). http://link.springer.com/article/10.1007/s11661-013-1968-4

[77] Li R D. Research on key basic problems of selective laser melting of metal powder[D]. Wuhan: Huazhong University of Science and Technology, 51-74(2010).

[78] Li R D, Liu J H, Shi Y S et al. Balling behavior of stainless steel and nickel powder during selective laser melting process[J]. The International Journal of Advanced Manufacturing Technology, 59, 1025-1035(2012). http://www.tandfonline.com/servlet/linkout?suffix=CIT0020&dbid=16&doi=10.1080%2F14686996.2018.1455154&key=10.1007%2Fs00170-011-3566-1

[79] Wu W H, Yang Y Q, Wang D. Balling phenomenon in selective laser melting process[J]. Journal of South China University of Technology(Natural Science Edition), 38, 110-115(2010).

[80] Wang D, Yang Y Q, Su X B et al. Study on energy input and its influences on single-track, multi-track, and multi-layer in SLM[J]. The International Journal of Advanced Manufacturing Technology, 58, 1189-1199(2012). http://link.springer.com/article/10.1007/s00170-011-3443-y

[81] Dai D H, Gu D D. Effect of metal vaporization behavior on keyhole-mode surface morphology of selective laser melted composites using different protective atmospheres[J]. Applied Surface Science, 355, 310-319(2015). http://www.sciencedirect.com/science/article/pii/S0169433215016098

[82] Chen H Y, Gu D D, Gu R H et al. Microstructure evolution and mechanical properties of 5CrNi4Mo Die steel parts by selective laser melting additive manufacturing[J]. Chinese Journal of Lasers, 43, 0203003(2016).

[83] Qiu C L, Panwisawas C, Ward M et al. On the role of melt flow into the surface structure and porosity development during selective laser melting[J]. Acta Materialia, 96, 72-79(2015). http://www.sciencedirect.com/science/article/pii/S1359645415003870

[84] Zhang G, Wang J H, Zhang H. Research progress of balling phenomena in selective laser melting[J]. Foundry Technology, 38, 262-265(2017).

[85] Zhu H H, Lu L. Fuh J Y H. Development and characterisation of direct laser sintering Cu-based metal powder[J]. Journal of Materials Processing Technology, 140, 314-317(2003). http://www.sciencedirect.com/science/article/pii/S0924013603007556

[86] Deng S S, Yang Y Q, Li Y et al. Planning of area-partition scanning path and its effect on residual stress of SLM molding parts[J]. Chinese Journal of Lasers, 43, 1202003(2016).

[87] Ahsan M N, Pinkerton A J, Moat R J et al. A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders[J]. Materials Science and Engineering: A, 528, 7648-7657(2011).

[88] Shi Q M, Gu D D, Xia M J et al. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites[J]. Optics & Laser Technology, 84, 9-22(2016). http://www.sciencedirect.com/science/article/pii/S0030399215307349

[89] Xu J G, Chen Y, Chen H et al. Influence of process parameters on forming defects of H13 steel processed by selective laser melting[J]. Laser & Optoelectronics Progress, 55, 041405(2018).

[90] Zhong C L. Investigations on high deposition-rate laser metal deposition for additive manufacturing application based on Inconel 718 Changchun:Changchun Institute of Optics, Fine Mechanics and Physics,[D]. Chinese Academy of Sciences(2015).

[91] Zhong C L, Fu J B, Ding Y L et al. Porosity control of Inconel 718 in high deposition-rate laser metal deposition[J]. Optics and Precision Engineering, 23, 3005-3011(2015).

[92] Leuders S, Thöne M, Riemer A et al. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance[J]. International Journal of Fatigue, 48, 300-307(2013). http://www.sciencedirect.com/science/article/pii/S014211231200343X

[93] Li L J. Repair of directionally solidified superalloy GTD-111 by laser-engineered net shaping[J]. Journal of Materials Science, 41, 7886-7893(2006). http://link.springer.com/article/10.1007/s10853-006-0948-0

[94] Li S, Li C G, Zhang Q S et al. Research status and prospect of additive manufacturing in laser by aluminum alloy[J]. Light Industry Machinery, 35, 98-101(2017).

[95] Yuan X B, Wei Q S, Wen S F et al. Research on selective laser melting AlSi10Mg alloy powder[J]. Hot Working Technology, 43, 91-94(2014).

[96] Gerling R, Leitgeb R, Schimansky F P. Porosity and argon concentration in gas atomized γ-TiAl powder and hot isostatically pressed compacts[J]. Materials Science and Engineering: A, 252, 239-247(1998). http://www.sciencedirect.com/science/article/pii/S092150939800656X