[1] Cho D G, Yang S K, Yun J C et al. Effect of sintering profile on densification of nano-sized Ni/Al2O3 composite[J]. Composites Part B: Engineering, 45, 159-164(2013).

[2] Rao X W, Gu D D, Xi L X. Forming mechanism and mechanical properties of carbon nanotube reinforced aluminum matrix composites by selective laser melting[J]. Journal of Mechanical Engineering, 55, 1-9(2019).

[3] Cao G H, Sun T Y, Wang C H et al. Investigations of γ’, γ″ and δ precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting[J]. Materials Characterization, 136, 398-406(2018).

[4] Popov V A, Burghammer M, Rosenthal M et al. In situ synthesis of TiC nano-reinforcements in aluminum matrix composites during mechanical alloying[J]. Composites Part B: Engineering, 145, 57-61(2018).

[5] Guo C, Yu Z R, Hu X G et al. Y2O3 nanoparticles decorated IN738LC superalloy manufactured by laser powder bed fusion: cracking inhibition, microstructures and mechanical properties[J]. Composites Part B: Engineering, 230, 109555(2022).

[6] Zhu G L, Wang R, Wang W et al. Research progress on particulate-reinforced nickel-based composites[J]. Journal of Materials Science and Engineering, 36, 496-503, 486(2018).

[7] Xia M J, Gu D D, Ma C L et al. Microstructure evolution, mechanical response and underlying thermodynamic mechanism of multi-phase strengthening WC/Inconel 718 composites using selective laser melting[J]. Journal of Alloys and Compounds, 747, 684-695(2018).

[8] Santos E C, Shiomi M, Osakada K et al. Rapid manufacturing of metal components by laser forming[J]. International Journal of Machine Tools and Manufacture, 46, 1459-1468(2006).

[9] Gu D D, Zhang H M, Dai D H et al. Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance[J]. Composites Part B: Engineering, 163, 585-597(2019).

[10] Yang S Z, Han Q Q, Yin Y Y et al. Effects of TiB2 content on the processability and mechanical performance of Hastelloy-X based composites fabricated by selective laser melting[J]. Optics & Laser Technology, 155, 108441(2022).

[11] Rezaee Hajideh M, Farahani M. Direct laser metal deposition cladding of IN718 on DIN 1.2714 tool steel reinforced by the SiC nanoparticles[J]. Journal of Materials Research and Technology, 23, 2020-2030(2023).

[12] Wang Y D, Li B R. Influence of superficial Y2O3 coatings on high-temperature oxidation of Ni[J]. Rare Metal Materials and Engineering, 44, 1331-1334(2015).

[13] Basu B, Raju G B, Suri A K. Processing and properties of monolithic TiB2 based materials[J]. International Materials Reviews, 51, 352-374(2006).

[14] Han Q Q, Gu Y C, Huang J et al. Selective laser melting of Hastelloy X nanocomposite: effects of TiC reinforcement on crack elimination and strength improvement[J]. Composites Part B: Engineering, 202, 108442(2020).

[15] Li H, Zhang J X, Lu B H. Forming quality and mechanical properties of TiC-particle-reinforced Inconel 718 composites produced by laser powder bed fusion[J]. Chinese Journal of Lasers, 50, 0802307(2023).

[16] Nguyen Q B, Zhu Z, Chua B W et al. Development of WC-Inconel composites using selective laser melting[J]. Archives of Civil and Mechanical Engineering, 18, 1410-1420(2018).

[17] Li Y L, Liu Z W, Dong Z W et al. Microstructure and mechanical properties of TiB2 particle reinforced A356 composites[J]. Special Casting & Nonferrous Alloys, 44, 1326-1332(2024).

[18] Bi G, Sun C N, Nai M L et al. Micro-structure and mechanical properties of nano-TiC reinforced Inconel 625 deposited using LAAM[J]. Physics Procedia, 41, 828-834(2013).

[19] Zheng M, Wei L, Chen J et al. Surface morphology evolution during pulsed selective laser melting: numerical and experimental investigations[J]. Applied Surface Science, 496, 143649(2019).

[20] Xiao H, Li Y Q, Xiao W J et al. Grain structure and texture control of additive manufactured nickel-based superalloy using quasi-continuous-wave laser directed energy deposition[J]. Additive Manufacturing, 69, 103520(2023).

[21] Hua W J, Zhang J X. Defect and quality control of GH3536 super alloy fabricated via laser selective melting[J]. Laser & Optoelectronics Progress, 61, 0514008(2024).

[22] Wang L, Guo K, Cong J Q et al. Effect of process parameters on defect in selective laser melting of 316L stainless steel[J]. Laser & Optoelectronics Progress, 60, 0514007(2023).

[23] Wang L Z, Wang S, Wu J J. Experimental investigation on densification behavior and surface roughness of AlSi10Mg powders produced by selective laser melting[J]. Optics & Laser Technology, 96, 88-96(2017).

[24] Chen F. Study on microstructures and mechanical properties of TiN/Inconel 718 composites fabricated by selective laser melting[D](2020).

[25] Zhao M Q, Song J, Tang Q et al. Laser powder bed fusion of Inconel 718-based composites: effect of TiB2 content on microstructure and mechanical performance[J]. Optics & Laser Technology, 167, 109596(2023).

[26] Song J F, Song Y N, Wang W W et al. Prediction and control on the surface roughness of metal powder using selective laser melting[J]. Chinese Journal of Lasers, 49, 0202008(2022).

[27] Ma L, Kong X W, Liang J J et al. Influence of pulsed laser scanning patterns on microstructural evolution and mechanical properties of Inconel 718 in direct laser deposition[J]. Journal of Materials Research and Technology, 25, 1231-1244(2023).

[28] Sohn H, Liu P P, Yoon H et al. Real-time porosity reduction during metal directed energy deposition using a pulse laser[J]. Journal of Materials Science & Technology, 116, 214-223(2022).

[29] Li S M, Xiao H, Liu K Y et al. Melt-pool motion, temperature variation and dendritic morphology of Inconel 718 during pulsed- and continuous-wave laser additive manufacturing: a comparative study[J]. Materials & Design, 119, 351-360(2017).

[30] Jin L, Shi S H, Wei C et al. Influence of substrate irradiation proportion on stability of laser coaxial wire-melting deposition[J]. Acta Optica Sinica, 43, 0414003(2023).

[31] Shah K, Pinkerton A J, Salman A et al. Effects of melt pool variables and process parameters in laser direct metal deposition of aerospace alloys[J]. Materials and Manufacturing Processes, 25, 1372-1380(2010).