Laser intensity distribution measurement method based on tomographic imaging

[1] [1] WANG J L. Measurement technology of energy density distribution based on spot image[D]. Changchun: Changchun University of Science Technology, 2013. (in Chinese)

[2] WANG Y R, WANG J ZH, RAN ZH H, . Analysis of effects on the beam quality β factor of high power laser[J]. Chinese Optics, 14, 353-360(2021).

[3] GAO W K, DU X P, WANG Y, . Review of laser speckle target detection technology[J]. Chinese Optics, 13, 1182-1193(2020).

[4] WEN K, LI H ZH, MA ZH, . Effects of spot size on the temperature response of an aluminum alloy irradiated by a continuous laser[J]. Chinese Optics, 13, 1023-1031(2020).

[5] PANG M, YUAN X W, GAO X Y, . Spot distortion calibration in measurement of laser intensity distribution based on imaging by scattering[J]. Chinese Physics B, 5(2010).

[6] WANG F, XU Z D, JI Y F, . Measurement system for laser intensity distribution based on scanning diffuse reflection imaging[J]. Infrared and Laser Engineering, 43, 4(2014).

[7] ZHU ZH, WANG Y ZH, YI Y X, et al. Novel direct-detection scheme for measuring energy distribution of laser spots in outfield[J]. Opto-Electronic Engineering, 32, 49-53(2005).

[8] CHO K Y, SATIJA A, POURPOINT T L, et al. High-repetition-rate three-dimensional OH imaging using scanned planar laser-induced fluorescence system for multiphase combustion[J]. Applied Optics, 53, 316-326(2014).

[9] NYGREN J, HULT J, RICHTER M, et al. Three-dimensional laser induced fluorescence of fuel distributions in an HCCI engine[J]. Proceedings of the Combustion Institute, 29, 679-685(2002).

[10] CHEN Q, XU X P, JIANG ZH G, . Light field computational reconstruction from focal planes based on light field camera[J]. Optics and Precision Engineering, 26, 708-714(2018).

[11] SUN J, XU CH L, ZHANG B, et al. Three-dimensional temperature field measurement of flame using a single light field camera[J]. Optics Express, 24, 1118-1132(2016).

[12] LILLO P M, GREENE M L, SICK V. Plenoptic single-shot 3D imaging of in-cylinder fuel spray geometry[J]. Zeitschrift für Physikalische Chemie, 229, 549-560(2015).

[13] SAMARASINGHE J, PELUSO S, SZEDLMAYER M, et al. Three-dimensional chemiluminescence imaging of unforced and forced swirl-stabilized flames in a lean premixed multi-nozzle can combustor[J]. Journal of Engineering for Gas Turbines and Power, 135, 101503(2013).

[14] CAI W W, LI X S, MA L. Practical aspects of implementing three-dimensional tomography inversion for volumetric flame imaging[J]. Applied Optics, 52, 8106-8116(2013).

[15] CAI W W, LI X S, LI F, et al. Numerical and experimental validation of a three-dimensional combustion diagnostic based on tomographic chemiluminescence[J]. Optics Express, 21, 7050-7064(2013).

[16] SHI SH X, WANG J H, DING J F, et al. Parametric study on light field volumetric particle image velocimetry[J]. Flow Measurement and Instrumentation, 49, 70-88(2016).

[17] ZHOU G X, LI F, WANG K L, et al. Research on a quantitative method for three-dimensional computed tomography of chemiluminescence[J]. Applied Optics, 59, 5310-5318(2020).

[18] WINDLE C I, ANDERSON J, BOYD J, et al. In situ imaging of 4D fire events in a ground vehicle testbed using customized fiber-based endoscopes[J]. Combustion and Flame, 224, 225-232(2021).

[19] WANG Q, YU T, LIU H C, et al. Optimization of camera arrangement for volumetric tomography with constrained optical access[J]. Journal of the Optical Society of America B, 37, 1231-1239(2020).

[20] LIU H C, PAOLILLO G, ASTARITA T, et al. Computed tomography of chemiluminescence for the measurements of flames confined within a cylindrical glass[J]. Optics Letters, 44, 4793-4796(2019).

[21] [21] ZHANG ZH Y. Flexible camera calibration by viewing a plane from unknown ientations[C]. Proceedings of the Seventh IEEE International Conference on Computer Vision, IEEE, 1999: 666673.

[22] YU T, LIU H C, CAI W W. On the quantification of spatial resolution for three-dimensional computed tomography of chemiluminescence[J]. Optics Express, 25, 24093-24108(2017).

[23] YU T, TIAN B, CAI W W. Development of a beam optimization method for absorption-based tomography[J]. Optics Express, 25, 5982-5999(2017).

[24] WEI CH Y, PINEDA D I, PAXTON L, et al. Mid-infrared laser absorption tomography for quantitative 2D thermochemistry measurements in premixed jet flames[J]. Applied Physics B, 124, 123(2018).

[25] YU T, LI Z M, RUAN C, et al. Development of an absorption-corrected method for 3D computed tomography of chemiluminescence[J]. Measurement Science and Technology, 30, 045403(2019).

[26] LIU H C, SUN B, CAI W W. kHz-rate volumetric flame imaging using a single camera[J]. Optics Communications, 437, 33-43(2019).

[27] LIU H C, YU T, ZHANG M, et al. Demonstration of 3D computed tomography of chemiluminescence with a restricted field of view[J]. Applied Optics, 56, 7107-7115(2017).