[1] Rowe M, Liu S. Recent developments in underwater wet welding[J]. Science and Technology of Welding and Joining, 6, 387-396(2001).

[2] Zhang X D, Ashida E, Shono S et al. Effect of shielding conditions of local dry cavity on weld quality in underwater Nd∶YAG laser welding[J]. Journal of Materials Processing Technology, 174, 34-41(2006).

[3] Guo N, Xing X, Zhao H Y et al. Effect of water depth on weld quality and welding process in underwater fiber laser welding[J]. Materials & Design, 115, 112-120(2017).

[4] Qin H, Cai Z H, Zhu J L et al. Microstructure and properties of TC4 titanium alloy by direct underwater laser beam welding[J]. Transactions of the China Welding Institution, 40, 143-148, 167(2019).

[5] Sakate P M, Mullick S, Gopinath M et al. An investigation on physical phenomena of water-jet assisted underwater wet laser welding technique under continuous and pulsed mode operation[J]. Optik, 242, 167272(2021).

[6] Feng X R, Cui X F, Jin G et al. Underwater laser cladding in full wet surroundings for fabrication of nickel aluminum bronze coatings[J]. Surface and Coatings Technology, 333, 104-114(2018).

[7] Yoda M, Tamura M, Fukuda T et al. Underwater laser beam welding for nuclear reactors[C], 191-195(2012).

[8] Sun G L, Wang Z D, Lu Y et al. Underwater laser welding/cladding for high-performance repair of marine metal materials: a review[J]. Chinese Journal of Mechanical Engineering, 35, 42-60(2022).

[9] Guo N, Fu Y L, Xing X et al. Underwater local dry cavity laser welding of 304 stainless steel[J]. Journal of Materials Processing Technology, 260, 146-155(2018).

[10] Fu Y L, Guo N, Zhu B H et al. Microstructure and properties of underwater laser welding of TC4 titanium alloy[J]. Journal of Materials Processing Technology, 275, 116372(2020).

[11] Sun J H, Ren W J, Nie P L et al. Study on the weldability, microstructure and mechanical properties of thick Inconel 617 plate using narrow gap laser welding method[J]. Materials & Design, 175, 107823(2019).

[12] Cheng H, Kang L, Pang J et al. Effect of the welding position on weld quality when laser welding Inconel 617 Ni-based superalloy[J]. Optics & Laser Technology, 139, 106962(2021).

[13] Kuo T Y. Effects of pulsed and continuous Nd-YAG laser beam waves on welding of Inconel alloy[J]. Science and Technology of Welding and Joining, 10, 557-565(2005).

[14] Li H L, Liu S X, Sun F X et al. Preliminary investigation on underwater wet welding of Inconel 625 alloy: microstructure, mechanical properties and corrosion resistance[J]. Journal of Materials Research and Technology, 20, 2394-2407(2022).

[15] Yue T Y, Wen D X, Li J J et al. Research progress in nickel-based superalloy 690[J]. Journal of Netshape Forming Engineering, 13, 26-34(2021).

[16] Heiple C R. Mechanism for minor element effect on GTA fusion zone geometry[J]. Welding Journal, 61, 97-102(1982).

[17] Cheng H, Zhou L G, Liu J et al. Effect of heat input on microstructure and mechanical properties of laser welded joint of Inconel 617 nickel-base superalloy[J]. Journal of Materials Engineering, 51, 113-121(2023).

[18] Gong L, Chen B, Zhang L et al. Effect of cooling rate on microstructure, microsegregation and mechanical properties of cast Ni-based superalloy K417G[J]. Journal of Materials Science & Technology, 34, 811-820(2018).

[19] Zhu Z W, Ma X Q, Jiang P et al. Planar-cellular-dendritic transformation in the fusion zone of a GH909 superalloy weldment[J]. Journal of Materials Research and Technology, 10, 960-975(2021).

[20] Li J K, Zhang Z W, Yang Y Q et al. Crystal orientation and microstructure of DD91 nickel-based single crystal superalloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 49, 1402103(2022).

[21] Zhang L, Yan F. Microstructural characteristics of laser welded joints of GH909 alloy[J]. Chinese Journal of Lasers, 49, 0802004(2022).

[22] Perricone M J, Dupont J N. Effect of composition on the solidification behavior of several Ni-Cr-Mo and Fe-Ni-Cr-Mo alloys[J]. Metallurgical and Materials Transactions A, 37, 1267-1280(2006).