[1] KOJIMA A, SHIRAI Y, TESHIMA K et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells[D]. Journal of the American Chemical Society, 131, 6050-6051(2009).

[2] IM J H, LEE C R, LEE J W et al. 6.5% efficient perovskite quantum-dot-sensitized solar cell[D]. Nanoscale, 3, 4088-4093(2011).

[3] LEE M M, MIYASAKA T, TEUSCHER J et al. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites[D]. Science, 338, 643-647(2012).

[4] BURSCHKA J, MOON S, PELLET N et al. Sequential deposition as a route to high-performance perovskite-sensitized solar cells[D]. Nature, 499, 316-319(2013).

[5] JOHNSTON M B, LIU M, SNAITH H J. Efficient planar heterojunction perovskite solar cells by vapour deposition[D]. Nature, 501, 395-398(2013).

[6] GRÄTZEL M. The light and shade of perovskite solar cells[D]. Nat. Mater., 13, 838-842(2014).

[7] CHEN Q, LI G, ZHOU H et al. Interface engineering of highly efficient perovskite solar cells[D]. Science, 345, 542-546(2014).

[8] ASADPOUR R, NIE W, TSAI H et al. High-efficiency solution- processed perovskite solar cells with millimeter-scale grains[D]. Science, 347, 522-525(2015).

[9] JEON N J, NOH J H, YANG W S et al. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange[D]. Science, 348, 1234-1237(2015).

[10] JUNG E H, PARK B W, YANG W S et al. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells[D]. Science, 356, 1376-1379(2017).

[11] BOIX P P, VELDHUIS S A, YANTARA N et al. Perovskite materials for light-emitting diodes and lasers[D]. Advanced Materials, 28, 6804-6834(2016).

[12] LAI M L, MOGHADDAM R S, TAN Z K et al. Bright light-emitting diodes based on organometal halide perovskite[D]. Nature Nanotechnology, 9, 687-692(2014).

[13] DI D, LI G, TAN Z K et al. Efficient light-emitting diodes based on nanocrystalline perovskite in a dielectric polymer matrix[D]. Nano Letters, 15, 2640-2644(2015).

[14] JARAMILLOQUINTERO O A, RINCON M, SANCHEZ R S et al. Bright visible-infrared light emitting diodes based on hybrid halide perovskite with spiro-OMeTAD as a hole-injecting layer[D]. Journal of Physical Chemistry Letters, 6, 1883-1890(2015).

[15] XING J, YAN F, ZHAO Y et al. High-efficiency light-emitting diodes of organometal halide perovskite amorphous nanoparticles[D]. ACS Nano, 10, 6623-6630(2016).

[16] JIN Y, WANG J, WANG N et al. Interfacial control toward efficient and low-voltage perovskite light-emitting diodes[D]. Advanced Materials, 27, 2311-2316(2015).

[17] CHO H, JEONG S H, PARK M H et al. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes[D]. Science, 350, 1222-1225(2015).

[18] DOU L, WONG A B, YU Y et al. Atomically thin two-dimensional organic-inorganic hybrid perovskites[D]. Science, 349, 1518-1521(2015).

[19] AHMAD S, SADHANALA A, ZHAO B et al. Blue-green color tunable solution processable organolead chloride-bromide mixed halide perovskites for optoelectronic applications[D]. Nano Letters, 15, 6095-6101(2015).

[20] CHO H, HEO J H, KIM Y H et al. Multicolored organic/inorganic hybrid perovskite light-emitting diodes[D]. Advanced Materials, 27, 1248-1254(2015).

[21] CHUA M R, HOYE R L Z, MUSSELMAN K P et al. Enhanced performance in fluorene-free organometal halide perovskite light-emitting diodes using tunable, low electron affinity oxide electron injectors[D]. Advanced Materials, 27, 1414-1419(2015).

[22] BAEK G, KIM D B, YU J C et al. High-performance planar perovskite optoelectronic devices: a morphological and interfacial control by polar solvent treatment[D]. Advanced Materials, 27, 3492-3500(2015).

[23] COMIN R, QUAN L N, YUAN M et al. Perovskite energy funnels for efficient light-emitting diodes[D]. Nature Nanotechnology, 11, 872-877(2016).

[24] CHENG L, GE R, WANG N et al. Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells[D]. Nature Photonics, 10, 699-704(2016).

[25] KERNER R A, XIAO Z, ZHAO L et al. Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites[D]. Nature Photonics, 11, 108-115(2017).

[26] HU K, LIAO Q, ZHANG H et al. Perovskite microdisk microlasers self-assembled from solution[D]. Advanced Materials, 27, 3405-3410(2015).

[27] PATEL J B, SALIBA M, WOOD S M et al. Structured organic- inorganic perovskite toward a distributed feedback laser[D]. Advanced Materials, 28, 923-929(2016).

[28] AHMADI M, fundamental physics. Advanced Materials, WU T. 29(41): 1605242-1-24[D]. HU B. A review on organic-inorganic halide perovskite photodetectors: device engineering(2017).

[29] CHAE J, DONG R, FANG Y et al. High-gain and low-driving- voltage photodetectors based on organolead triiodide perovskites[D]. Advanced Materials, 27, 1912-1918(2015).

[30] ARMIN A, BURN P L, LIN Q et al. Filterless narrowband visible photodetectors[D]. Nature Photonics, 9, 687-694(2015).

[31] CHEN H W, JENA A K, SAKAI N et al. A switchable high-sensitivity photodetecting and photovoltaic device with perovskite absorber[D]. Journal of Physical Chemistry Letters, 6, 1773-1779(2015).

[32] RICCARDO C, SAIDAMINOV M I, VALERIO A et al. 6: 8724-1-7[D](2015).

[33] ABDELHADY A L, MACULAN G, SHEIKH A D et al. CH₃NH₃PbCl₃ single crystals: inverse temperature crystallization and visible-blind UV-photodetector[D]. Journal of Physical Chemistry Letters, 6, 3781-3786(2015).

[34] PENG M, YAN K, YU X et al. High-performance perovskite memristor based on methyl ammonium lead halides[D]. Journal of Materials Chemistry C, 4, 1375-1381(2016).

[35] GU C, LEE J S. Flexible hybrid organic-inorganic perovskite memory[D]. ACS Nano, 10, 5413-5418(2016).

[36] GUPTA S, KEDEM N, KULBAK M et al. Cesium enhances long-term stability of lead bromide perovskite-based solar cells[D]. Journal of Physical Chemistry Letters, 7, 167-172(2016).

[37] CAHEN D, HODES G, KULBAK M. How important is the organic part of lead halide perovskite photovoltaic cells? efficient CsPbBr₃ cells[D]. Journal of Physical Chemistry Letters, 6, 2452-2456(2015).

[38] BODNARCHUK M I, PROTESESCU L, YAKUNIN S et al. Nanocrystals of cesium lead halide perovskites (CsPbX₃, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut[D]. Nano Letters, 15, 3692-3696(2015).

[39] HUANG Y, WEI Y, WU Y et al. Capping CsPbBr₃ with ZnO to improve performance and stability of perovskite memristors[D]. Nano Research, 10, 1584-1594(2017).

[40] LIN Q, LIU D, ZANG Z et al. Flexible all-inorganic perovskite CsPbBr₃ nonvolatile memory device[D]. ACS Applied Materials & Interfaces, 9, 6171-6176(2017).

[41] HUO C, LIU X, SONG X et al. Field-effect transistors based on Van-Der-Waals-grown and dry-transferred all-inorganic perovskite ultrathin platelets[D]. Journal of Physical Chemistry Letters, 8, 4785-4792(2017).

[42] CHANG X, LI W, ZHU L et al. Carbon-based CsPbBr₃ perovskite solar cells: all-ambient processes and high thermal stability[D]. ACS Applied Materials & Interfaces, 8, 33649-33655(2016).

[43] CALMEIRO T, JANA S, PANIGRAHI S et al. Imaging the anomalous charge distribution inside CsPbBr₃ perovskite quantum dots sensitized solar cells[D]. ACS Nano, 11, 10214-10221(2017).

[44] CHEN C, CHIANG K, LIN H et al. 29(12): 1605290-1-7[D](2017).

[45] FENG X L, ZENG Q S, ZHANG X Y et al. 30(9): 1705393-1-9[D]. efficient solar cells with high open-circuit voltage over 1.3 V. Advanced Materials(2018).

[46] CHEN J, LI X, YU D et al. Constructing fast carrier tracks into flexible perovskite photodetectors to greatly improve responsivity[D]. ACS Nano, 11, 2015-2023(2017).

[47] GU Y, SHAN Q, XUE J et al. Constructing Mie-scattering porous interface-fused perovskite films to synergistically boost light harvesting and carrier transport[D]. Angewandte Chemie International Edition, 56, 5232-5236(2017).

[48] CHEN J, YANG B, ZHANG F et al. 29(40): 1703758-1-8[D]. fast all-inorganic perovskite-based photodetector via fast carrier diffusion. Advanced Materials(2017).

[49] DU Z, YANG T, ZHENG Y et al. Superior photodetectors based on all-inorganic perovskite CsPbI₃ nanorods with ultrafast response and high stability[D]. ACS Nano, 12, 1611-1617(2018).

[50] HUANG C Y, MAO C, ZOU C et al. CsPbBr₃ perovskite quantum dot vertical cavity lasers with low threshold and high stability[D]. ACS Photonics, 4, 2281-2289(2017).

[51] JIANG Q, YANG X, ZHANG L et al. Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes[D]. Nature Communication, 8, 15640(2017).

[52] CHO H, KIM Y H, light-emitting diodes. Advanced Materials, WOLF C et al. 1704587-1-24[D](2018).

[53] CAO F, LI X, optical properties, optoelectronic applications. Small, structural features, YU D et al. 13(9): 1603996-1-24[D](2017).

[54] HE X, QIU Y. 29(32): 1700775-1-27[D]. YANG S. Fully-inorganic trihalide perovskite nanocrystals: a new research frontier of optoelectronic materials. Advanced Materials(2017).

[55] LI J, SHAN X. BADE S G R, et al. Single-layer halide perovskite light-emitting diodes with sub-band gap turn-on voltage and high brightness[D]. Journal of Physical Chemistry Letters, 7, 4059-4066(2016).

[56] CHENCHENG R W, LIN H W, LY K T et al. Near-infrared organic light-emitting diodes with very high external quantum efficiency and radiance[D]. Nature Photonics, 11, 63-68(2017).

[57] BAWENDI M G, SHIRASAKI Y, SUPRAN G J et al. Emergence of colloidal quantum-dot light-emitting technologies[D]. Nature Photonics, 7, 13-23(2013).

[58] LI J, LI X, SONG J et al. Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX₃)[D]. Advanced Materials, 27, 7162-7167(2015).

[59] LI J, WANG T, XU L et al. 29(5): 1603885-1-9[D](2017).

[60] PAN J, QUAN L N, ZHAO Y et al. Highly efficient perovskite- quantum-dot light-emitting diodes by surface engineering[D]. Advanced Materials, 28, 8718-8725(2016).

[61] TAN Y, WU L, ZOU Y et al. Highly luminescent and stable perovskite nanocrystals with octylphosphonic acid as ligand for efficient light emitting diodes[D]. ACS Applied Materials & Interfaces, 10, 3784-3792(2018).

[62] MATSUSHIMA T, QIN C. SANDANAYAKA A S D, et al. Centrifugal-coated quasi-two-dimensional perovskite CsPb₂Br₅ films for efficient and stable light-emitting diodes[D]. Journal of Physical Chemistry Letters, 47, 5415-5421(2017).

[63] CHIBA T, HOSHI K, PU Y J et al. High-efficiency perovskite quantum-dot light-emitting devices by effective washing process and interfacial energy level alignment[D]. ACS Applied Materials & Interfaces, 9, 18054-18060(2017).

[64] HUANG C Y, SANEHIRA E M, ZOU C et al. 28(45): 455201-1-7[D](2017).

[65] enhanced oscillator strength, HUANG W, LI P, XU J et al. 29(43): 1703703-1-10[D]. application in light-emitting diodes. Advanced Materials(2017).

[66] LE Q V, PARK M, SOHN W et al. Investigation of energy levels and crystal structures of cesium lead halides and their application in full-color light-emitting diodes[D]. Advanced Electronic Materials, 3, 1600448(2017).

[67] CHOI J W, KIM T, SUH Y H et al. High-performance CsPbX₃ perovskite quantum dot light emitting devices via solid-state ligand exchange[D]. ACS Applied Nano Materials, 1, 488-496(2018).

[68] LUO Z, WANG Z, ZHAO C et al. Efficient and stable pure green all-inorganic perovskite CsPbBr₃ light-emitting diodes with a solution-processed NiO_x interlayer[D]. Journal of Physical Chemistry C, 121, 28132-28138(2017).

[69] WANG W, XU B, ZHANG X et al. Thin film perovskite light-emitting diode based on CsPbBr₃, powders and interfacial engineering[D]. Nano Energy, 37, 40-45(2017).

[70] HU Y, SHI Y L, WANG Q et al. Vacuum-evaporated all-inorganic cesium lead bromine perovskites for high-performance light-emitting diodes[D]. Journal of Materials Chemistry C, 5, 8144-8149(2017).

[71] CHO H, KIM J S, WOLF C et al. 29(31): 1700579-1-8[D](2017).

[72] BHAUMIK S, YAN F, YANTARA N et al. Inorganic halide perovskites for efficient light-emitting diodes[D]. Journal of Physical Chemistry Letters, 6, 4360-4364(2015).

[73] JAMALUDIN N F, WEI J N, YAN F N et al. Enhanced coverage of all-inorganic perovskite CsPbBr₃ through sequential deposition for green light-emitting diodes[D]. Energy Technology, 5, 1859-1865(2017).

[74] MENG L, their composites. Advanced Materials, YANG Z, YAO E P et al. 29(23): 1606859-1-7[D]. white LEDs based on inorganic perovskite nanocrystals(2017).

[75] JAMALUDIN N F, NG Y F, YANTARA N et al. Rapid crystallization of all-inorganic CsPbBr₃ perovskite for high-brightness light-emitting diodes[D]. ACS Omega, 2, 2757-2764(2017).

[76] CHU B, JIN F, ZHAO B et al. Morphology control towards bright and stable inorganic halide perovskite light-emitting diodes[D]. Journal of Materials Chemistry C, 6, 1573-1578(2018).

[77] LING Y, TIAN Y, WANG X et al. Enhanced optical and electrical properties of polymer-assisted all-inorganic perovskites for light-emitting diodes[D]. Advanced Materials, 28, 8983-8989(2016).

[78] GUO X, HU Y, SONG L et al. Efficient inorganic perovskite light-emitting diodes with polyethylene glycol passivated ultrathin CsPbBr₃ films[D]. Journal of Physical Chemistry Letters, 8, 4148-4154(2017).

[79] WANG W, XU B, ZHANG X et al. Plasmonic perovskite light-emitting diodes based on Ag-CsPbBr₃ system[D]. ACS Applied Materials & Interfaces, 9, 4926-4931(2017).

[80] KIM D B, LEE A Y, YU J C et al. Enhancing the performance and stability of perovskite nanocrystal light-emitting diodes with a polymer matrix[D]. Advanced Materials Technologies, 2, 1700003(2017).

[81] XIONG Z Y, YU F X, ZHANG Y et al. Full coverage all-inorganic cesium lead halide perovskite film for high-efficiency light-emitting diodes assisted by 1,3,5-tri(m-pyrid-3-yl-phenyl) benzene[D]. Organic Electronics, 50, 480-484(2017).

[82] WU C, WU T, ZOU Y et al. 27(28): 1700338-1-7[D]. stability of all-inorganic perovskite light-emitting diodes by antisolvent vapor treatment. Advanced Functional Materials(2017).

[83] KULKARNI S A, NG Y F, PARIDA S et al. Highly efficient Cs-based perovskite light-emitting diodes enabled by energy funnelling[D]. Chemical Communications, 53, 12004-12007(2017).

[84] XU B, ZHANG J, ZHANG X et al. All-inorganic perovskite nanocrystals for high-efficiency light emitting diodes: dual-phase CsPbBr₃-CsPb₂Br₅ composites[D]. Advanced Functional Materials, 26, 4595-4600(2016).

[85] HUANG H, LIN H, ZHANG X et al. Enhancing the brightness of cesium lead halide perovskite nanocrystal based green light-emitting devices through the interface engineering with perfluorinated lonomer[D]. Nano Letters, 16, 1415-1420(2016).

[86] CAO W, WANG W, ZHANG X et al. Efficient light-emitting diodes based on green perovskite nanocrystals with mixed-metal cations[D]. Nano Energy, 30, 511-516(2016).

[87] DAS S, JAGADEESWARARAO M, MIR W J et al. Colloidal Mn-doped cesium lead halide perovskite nanoplatelets[D]. ACS Energy Letters, 2, 537-543(2017).

[88] SHAI X, SUN P, ZUO L et al. Efficient planar perovskite solar cells using halide Sr-substituted Pb perovskite[D]. Nano Energy, 36, 213-222(2017).

[89] ABDELHADY A L, BEGUM R, PARIDA M R et al. Engineering interfacial charge transfer in CsPbBr₃ perovskite nanocrystals by heterovalent doping[D]. Journal of the American Chemical Society, 139, 731-737(2017).

[90] LI J, LIU Y, ZOU S et al. Stabilizing cesium lead halide perovskite lattice through Mn(II) substitution for air-stable light-emitting diodes[D]. Journal of the American Chemical Society, 139, 11443-11450(2017).

[91] GE J, HAN B N, YAO J et al. Ce³+-doping to modulate photoluminescence kinetics for efficient CsPbBr₃ nanocrystals based light-emitting diodes[D]. Journal of the American Chemical Society, 140, 3626-3634(2018).

[92] JELLICOE T C, RICHTER J M. GLASS H F J, et al. Synthesis and optical properties of lead-free cesium tin halide perovskite nanocrystals[D]. Journal of the American Chemical Society, 138, 2941-2944(2016).

[93] CHEN L J, CHUANG Y J, LEE C R et al. Synthesis and optical properties of lead-free cesium tin halide perovskite quantum rods with high-performance solar cell application[D]. Journal of Physical Chemistry Letters, 7, 5028-5035(2016).

[94] CHEN J, HONG F, YANG B et al. Lead-free, air-stable all-inorganic cesium bismuth halide perovskite nanocrystals[D]. Angewandte Chemie International Edition, 56, 12471-12475(2017).

[95] KONG W, TONG X, WANG Y et al. High-performance red light photodetector based on lead-free bismuth halide perovskite film[D]. ACS Applied Materials & Interfaces, 9, 18977-18985(2017).

[96] GUO Y, MUHAMMAD F, WANG A et al. Controlled synthesis of lead-free cesium tin halide perovskite cubic nanocages with high stability[D]. Chemistry of Materials, 29, 6493-6501(2017).

[97] DENG H, YANG Y, ZHANG J et al. High quantum yield blue emission from lead-free inorganic antimony halide perovskite colloidal quantum dots[D]. ACS Nano, 11, 9294-9302(2017).

[98] LENG M, YANG Y, ZENG K et al. 28: 1704446-1-11[D]. excellent stability. Advanced Functional Materials(2018).

[99] LI Y, SHI Z, ZHANG Y et al. High-efficiency and air-stable perovskite quantum dots light-emitting diodes with an all-inorganic heterostructure[D]. Nano Letters, 17, 313-321(2016).

[100] LI J, SHAN Q, SONG J et al. All-inorganic quantum-dot light-emitting diodes based on perovskite emitters with low turn-on voltage and high humidity stability[D]. Journal of Materials Chemistry C, 5, 4565-4570(2017).

[101] HU D, MA X, ZHUANG S et al. Air-stable all inorganic green perovskite light emitting diodes based on ZnO/CsPbBr₃/NiO heterojunction structure[D]. Ceramics International, 44, 4685-4688(2018).

[102] LI S, LI Y, SHI Z et al. Strategy of solution-processed all-inorganic heterostructure for humidity/temperature-stable perovskite quantum dot light-emitting diodes[D]. ACS Nano, 12, 1462-1472(2018).