[1] [1] FENG C, LI R Z, LIU Y G, et al. Aging treatment effect on microstructure and mechanical properties of Ti-5Al-3V-1.5Mo-2Zr titanium alloy drill pipe［J］. Journal of Materials Engineering and Performance, 2020, 29(11): 7011-7025.

[2] [2] WANG K H, LIU G, ZHAO J, et al. Formability and microstructure evolution for hot gas forming of laser-welded TA15 titanium alloy tubes［J］. Materials & Design, 2016, 91: 269-277.

[3] [3] LIU L M, DU X, ZHU M L, et al. Research on the microstructure and properties of weld repairs in TA15 titanium alloy［J］. Materials Science and Engineering: A, 2007, 445-446: 691-696.

[4] [4] YEGANEH V E, LI P J. Effect of beam offset on microstructure and mechanical properties of dissimilar electron beam welded high temperature titanium alloys［J］. Materials & Design, 2017, 124: 78-86.

[5] [5] ION J C. Laser beam welding of wrought aluminium alloys［J］. Science and Technology of Welding and Joining, 2000, 5(5): 265-276.

[6] [6] HAROONI M, CARLSON B, KOVACEVIC R. Dual-beam laser welding of AZ31B magnesium alloy in zero-gap lap joint configuration［J］. Optics & Laser Technology, 2014, 56: 247-255.

[7] [7] SNCHEZ-AMAYA J M, AMAYA-VZQUEZ M R, GONZLEZ-ROVIRA L, et al. Influence of surface pre-treatments on laser welding of Ti6Al4V alloy［J］. Journal of Materials Engineering and Performance, 2014, 23(5): 1568-1575.

[8] [8] CHAUSS F, PAILLARD P, BERTRAND E, et al. Hybrid laser-metal active gas welding of S460ML steel plates: Weldability and consequences of dropping on weld quality［J］. Journal of Laser Applications, 2016, 28: 022416.

[9] [9] EBESTOV H, HORNK P, MRA L, et al. Fatigue properties of laser and hybrid laser-TIG welds of thermo-mechanically rolled steels［J］. Materials Science and Engineering: A, 2020, 772: 138780.

[10] [10] SEE T L, LIU Z, CHEETHAM S, et al. Laser abrading of carbon fibre reinforced composite for improving paint adhesion［J］. Applied Physics A, 2014, 117(3): 1045-1054.

[11] [11] ZHANG F D, LIU H, SUEBKA C, et al. Corrosion behaviour of laser-cleaned AA7024 aluminium alloy［J］. Applied Surface Science, 2018, 435: 452-461.

[12] [12] TURNER M W, CROUSE P L, LI L, et al. Investigation into CO2 laser cleaning of titanium alloys for gas-turbine component manufacture［J］. Applied Surface Science, 2006, 252(13): 4798-4802.

[13] [13] WHITEHEAD D J, CROUSE P L, SCHMIDT M J J, et al. Monitoring laser cleaning of titanium alloys by probe beam reflection and emission spectroscopy［J］. Applied Physics A, 2008, 93(1): 123-127.

[14] [14] DATTA S, RAZA M S, SAHA P, et al. Effects of process parameters on the quality aspects of weld-bead in laser welding of NiTinol sheets［J］. Materials and Manufacturing Processes, 2019, 34(6): 648-659.

[16] [16] GILLEN-CHRISTANDL K, GILLEN G D, PIOTROWICZ M J, et al. Comparison of Gaussian and super Gaussian laser beams for addressing atomic qubits［J］. Applied Physics B, 2016, 122(5): 1-20.

[17] [17] ALSHAER A W, LI L, MISTRY A. The effects of short pulse laser surface cleaning on porosity formation and reduction in laser welding of aluminium alloy for automotive component manufacture［J］. Optics & Laser Technology, 2014, 64: 162-171.

[18] [18] MIZUSAWA M, STOEV K N, SAKURAI K. Density gradient of a mirror-polished rutile (110) surface: X-ray reflectivity evaluation［J］. Japanese Journal of Applied Physics, 2003, 42(Part 1, No. 6A): 3709-3710.

[19] [19] ARAFIN S, SINGH R N. Thermal and physical properties of titanium oxide at high pressure［J］. Journal of Physics and Chemistry of Solids, 2016, 99: 86-91.

[20] [20] PINTO M A, CHEUNG N, IERARDI M C F, et al. Microstructural and hardness investigation of an aluminum-copper alloy processed by laser surface melting［J］. Materials Characterization, 2003, 50(2/3): 249-253.

[21] [21] LIU B W, MI G Y, WANG C M. Reoxidation process and corrosion behavior of TA15 alloy by laser ablation［J］. Rare Metals, 2021, 40(4): 865-876.

[22] [22] KITAMURA Y, OKINAKA N, SHIBAYAMA T, et al. Combustion synthesis of TiO2 nanoparticles as photocatalyst［J］. Powder Technology, 2007, 176(2/3): 93-98.

[24] [24] GASPER A N D, SZOST B, WANG X, et al. Spatter and oxide formation in laser powder bed fusion of Inconel 718［J］. Additive Manufacturing, 2018, 24: 446-456.

[25] [25] YE Z P, ZHANG Z J, JIN X, et al. Study of hybrid additive manufacturing based on pulse laser wire depositing and milling［J］. The International Journal of Advanced Manufacturing Technology, 2017, 88(5/6/7/8): 2237-2248.

[26] [26] LI S, WANG J, YANG S L, et al. Study on porosity defects of aluminium alloy in laser-MIG hybrid welding［J］. Applied Laser, 2013, 33(6): 595-600.

[27] [27] MAINA M, OKAMOTO Y, INOUE R, et al. Influence of surface state in micro-welding of copper by Nd: YAG laser［J］. Applied Sciences, 2018, 8(12): 2364.

[31] [31] BURZIC B, HOFELE M, MRDTER S, et al. Laser polishing of ground aluminum surfaces with high energy continuous wave laser［J］. Journal of Laser Applications, 2017, 29(1): 011701.