[1] CHUCL P. Using non-conetact thread measurement to reduce operator-induced variation[J]. Quality, 56, 22(2017).

[2] HU H, WEI B, LIANG J et al. Two-step calibration for vision measurement system with large field of view and high depth[J]. Opt. Precision Eng., 30, 478-488(2022).

     胡浩, 魏斌, 梁晋. 大视场远距离视觉测量系统的分步标定[J]. 光学 精密工程, 30, 478-488(2022).

[3] BAI X L, FAN Z H, ZHANG T Y et al. Application of five-axis Measurement Technology in Tubing Thread Measurement[J]. Tool Engineering, 56, 118-120(2022).

     白小亮, 樊治海, 张田云. 五轴测量技术在石油管螺纹测量中的应用[J]. 工具技术, 56, 118-120(2022).

[4] LI X, ZHOU J Y, XIN H J et al. Vision measurement system for geometric parameters of tubing internal thread based on double-mirrored structured light[J]. Optics Express, 30, 47701-47719(2022).

[5] SCHÄDEL S, WEDMANN A, STEIN M. Advanced screw thread metrology using an areal measuring strategy and a holistic evaluation method[J]. Measurement Science and Technology, 30(2019).

[6] LIN X M, YU J, YANG Y L et al. Study on contact scanning probe dynamic characteristics of high precision 3D thread measuring machine[J]. Chinese Journal of Scientific Instrument, 42, 92-98(2021).

     林希萌, 禹静, 杨艳玲. 高精度三维螺纹测量机接触式扫描测头动态特性研究[J]. 仪器仪表学报, 42, 92-98(2021).

[7] LI Q, LIU Y X, ZHANG Y C et al. A measuring method for radial section sizes of ring forgings based on laser scanning[J]. China Mechanical Engineering, 31, 2491-2496(2020).

     李群, 刘原西, 张玉存. 基于激光扫描的环形锻件径向尺寸测量方法[J]. 中国机械工程, 31, 2491-2496(2020).

[8] JIANG T, LI Y, HE C L. Visual measurement method of thread key parameters based on contour corner detection[J]. Journal of Electronic Measurement and Instrument, 36, 54-61(2022).

     江涛, 李媛, 贺晨龙. 基于轮廓角点检测的螺纹关键参数视觉测量方法[J]. 电子测量与仪器学报, 36, 54-61(2022).

[9] 田东庄, 陈彦宇, 李晴. 煤矿用钻杆螺纹的研究现状及展望[J]. 煤田地质与勘探, 48, 233-239(2020).

     TIAN D Z, CHEN Y Y, LI Q et al. Research status and prospect of drill pipe thread used in coal mine[J]. Coal Geology & Exploration, 48, 233-239(2020).

[10] LU Q H, KONG L F, LI L L et al. Compensation algorithm for taper thread distortion with large pitch and biased trapezoid[J]. Optical Engineering, 62, 84101(2023).

[11] GADELMAWLA E S. Computer vision algorithms for measurement and inspection of external screw threads[J]. Measurement, 100, 36-49(2017).

[12] 董祉序, 孙兴伟, 王可. 石油钻杆螺纹在机精密检测方法研究[J]. 机械工程学报, 54, 101-108(2018).

     DONG Z X, SUN X W, WANG K et al. Research on the on-machine precise measurement method for drill pipe thread[J]. Journal of Mechanical Engineering, 54, 101-108(2018).

[13] YU J, LIN X M, YANG Y L et al. Design and characteristic research of contact probe for high-precision 3D thread-measuring machine[J]. The International Journal of Advanced Manufacturing Technology, 119, 2235-2245(2022).

[14] CUI CH C, YANG C, LI Z Q et al. Measuring and evaluating system for surface morphology of sapphire substrates[J]. Opt. Precision Eng., 29, 2556-2566(2021).

     崔长彩, 杨成, 李子清. 蓝宝石衬底表面形貌检测和评价系统[J]. 光学 精密工程, 29, 2556-2566(2021).

[15] YOU R Q. Research on High-Precision Thread Detection based on Incomplete Point Cloud[D](2022).

     尤睿琦. 基于残缺点云的高精度螺纹检测研究[D](2022).

[16] YAO B, CAI Z Q, LU J et al. Novel laser triangulation measurement method for screw rotor profile under multi-factor constraints[J]. Measurement, 152, 107317(2020).

[17] 刘勇, 李昆, 王帼媛. 激光在机测量系统的实现[J]. 光学 精密工程, 25, 2668-2675(2017).

     LIU Y, LI K, WANG G Y. Implementation of laser on-machine measuring system[J]. Opt. Precision Eng., 25, 2668-2675(2017).

[18] 陈盛, 赵东标, 沈建新. 轮廓扫描式螺纹中径测量的两规校准补偿方法[J]. 仪器仪表学报, 35, 2184-2191(2014).

     CHEN S, ZHAO D B, SHEN J X et al. Compensation method of two gauge calibration for the thread pitch diameter measurement with profile scanning[J]. Chinese Journal of Scientific Instrument, 35, 2184-2191(2014).

[19] WU W B, SHAO D X, WANG W Q et al. Thread measurement algorithm research and software development[J]. Key Engineering Materials, 579/580, 392-397(2013).

[20] BAI J, LI J W, WANG X H et al. A new method to measure spectral reflectance and film thickness using a modified chromatic confocal sensor[J]. Optics and Lasers in Engineering, 154, 107019(2022).

[21] LI H T, LI X H. High-precision non-contact probes based on spectral confocal technology[J]. Journal of Measurement Science and Instrumentation, 14, 270-279(2023).

[22] DONG Z X, SUN X W, CHEN C Z et al. A fast and on-machine measuring system using the laser displacement sensor for the contour parameters of the drill pipe thread[J]. Sensors, 18, 1192(2018).