[1] CHENG R H, ZHANG Z S, CHEN Z G. Technical characteristics and implementation of the fourth-generation jet fighter engiens[J]. Acta Aero-nautica et Astronautica Sinica, 40, 022698(2019).

[2] LI Qiang, GUO Chenguang, DING Guangshuo et al. Research on milling subsurface layer damages of DD5 Ni-based single crystal superalloyxperimental study of nickel-based superalloy[J]. China Mechanical Engineering, 31(21), 2638-2645(2020).

[3] [3] YANG Wei. Experimental study on femtosecond laser micro hole machining of nockelbased superalloy [J]. Electromachining & Mould , 2021(4): 5660. (in Chinese)

[4] [4] YANG Qin. Study on the influence of film cooling structure on the cooling aerodynmic perfmance of highpress turbine vane[D]. Harbin: Harbin Institute of Technology, 2019. (in Chinese)

[5] LIU Z, LU Y, LIU Y. The present situation and development of small holes machining technology[J]. Journal of Physics. Conference Series, 1176, 42038(2019).

[6] MCNALLY C, FOLKES J, PASHBY I. Laser drilling of cooling holes in aeroengines: State of the art and future challenges[J]. Materials Science and Technology, 20, 805-813(2004).

[7] KUMAR N, MANDAL N, DAS A K. Micro-machining through electrochemical discharge processes: A review[J]. Materials and Manufacturing Processes, 35, 363-404(2020).

[8] [8] ZHOU Xijie, XIE Herui, XU Jingji, et al. Experimental study on femtosecond laser processing nontaper microholes in injection components of liquid rocket engines[J]. Journal of Mechanical Engineering , 2024, 60(17): 357366. (in Chinese)

[9] RUF A, BERGER P, DAUSINGER F et al. Analytical investigations on geometrical influences on laser drilling[J]. Journal of Physics. D, Applied Physics, 34, 2918-2925(2001).

[10] LIN Yuantian, GUO Liang, ZHANG Qingmao. The effects of steel drilling by ultra short laser abd the improvements of taper[J]. Applied Laser, 35, 356-362(2015).

[11] [11] KONONENKO T V, KLIMENTOV S M, GARNOV S V, et al. Hole fmation process in laser deep drilling with sht ultrasht pulses [C]Second International Symposium on Laser Precision Microfabrication, SPIE, 2002, 4426: 108112.

[12] ZHANG Z, WANG W, JIANG R et al. Investigation on geometric precision and surface quality of microholes machined by ultrafast laser[J]. Optics & Laser Technology, 121, 105834(2020).

[13] MARIMUTHU S, ANTAR M, DUNLEAVEY J. Characteristics of micro-hole formation during fibre laser drilling of aerospace superalloy[J]. Precision Engineering, 55, 339-348(2019).

[14] WANG M L, YANG L J, ZHANG S et al. Experimental investigation on the spiral trepanning of K24 superalloy with femtosecond laser[J]. Optics & Laser Technology, 101, 284-290(2018).

[15] ZHANG F Y, WANG J, WANG X et al. Experimental study of nickel-based superalloy IN792 with femtosecond laser drilling method[J]. Optics & Laser Technology, 143, 107335(2021).

[16] LI M, WEN Z, WANG P et al. Femtosecond laser high-quality drilling of film cooling holes in nickel-based single superalloy for turbine blades with a two-step helical drilling method[J]. Journal of Materials Processing Technology, 312, 117827(2023).

[17] [17] XU Jingji. Research on femtosecond laser processing technology of microholes in injection components of liquid rocket engines[D]. Xi’an: Xi’an Jiaotong University, 2022. (in Chinese)

[18] AUERSWALD J, RUCKLI A, GSCHWILM T et al. Taper angle correction in cutting of complex micro-mechanical contours with ultra-short pulse laser[J]. J Mech Eng Autom, 6, 334-338(2016).

[19] A Zhanwen, CHEN Lingling, WU Ying. Controlling of diameter and taper in ultrafast laser helical drilling[J]. Chinese Journal of Lasers, 48, 194-201(2021).

[20] ZHAO Wanqin, MEI Xuesong, WANG Wenjun. Ultrashort pulse laser drilling of micro-holes (part 1)- theoretical study[J]. Infrared and Laser Engineering, 48, 140-148(2019).