[1] [1] W.W.Duley. Laser Welding[M]. New York: John Wiley & Sons, 1999

[2] [2] Z.Sun, J.C. Ion, Laser welding of dissimilar metal combinations [J]. Journal of Materials Science Letters，1995, 30: 4205～4214

[3] [3] Li Yajiang, Wang Juan, Liu Peng. Welding of Badly Welding Dissimilar Materials and Application[M]. Beijing: Chemical Industry Press, 2004.1

[4] [4] Yu Gang, Yu Heji. Integrated Laser Intelligent Manufacturing[M]. Beijing：Metallurgy Industry Press, 2001.1

[5] [5] A.F.H.Kaplan. Unbounded keyhole collapse and bubble formation during pulsed laser interaction with liquid zinc[J]. J.Phys. D:Appl. Phys.，,2002. 35(11): 1218～1228

[6] [6] E.M.Anawa, E.M., A.G. Olabi. Control of welding residual stress for dissimilar laser welded materials[J]. Journal of Materials Processing Technology，2008,204(1-3): 22～33

[7] [7] C. Radhakrishna, K.P. Rao. The formation and control of Laves phase in superalloy 718 welds[J]. Journal of Materials Science，1997,32(8): 1977～1984

[8] [8] R.Kaul, P.Ganesh, A.K.Nath. Microstructural characterization of dissimilar laser weld between austenitic and ferritic stainless steels[J]. Journal of Laser Applications, 2005,17(1): 21～29

[9] [9] E.M.Anawa, A.G.Olabi. Using Taguchi method to optimize welding pool of dissimilar laser-welded components[J]. Optics and Laser Technology，,2008, 40(2): 379～388

[10] [10] Zuo Tiechuan, Xiao Rongshi, Chen Kai. Laser Materials Processing of High Strength Aluminum Alloys[M]. Beijing: National Defence Industry Press, 2002

[11] [11] Zhang Shenghai, Chen Kai, Xiao Rongshi et al.. Influence of metal powder on high power CO2 laser welding of aluminum alloy [J]. Chinese J. Lasers,2005, 32 (6) :860～863

[12] [12] Zhang Shenghai, Chen Kai, Xiao Rongshi et al.. High power CO2 laser powder welding of aluminum alloy[J]. Chinese J. Lasers,2006, 33(5) : 714-718

[13] [13] A.Mathieu, R.Shabadi, A.Deschamps et al.. Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire) [J]. Optics and Laser Technology,2007, 39(3): 652～661

[14] [14] K.Nishimoto, H.Fujii, S.Katayama. Laser pressure welding of Al alloy and low C steel[J]. Science and Technology of Welding and Joining,2006, 11(2): 224～231

[15] [15] R.Borrisutthekul, T.Yachi, Y.Miyashita et al..Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy[J]. Materials Science and Engineering, 2007, 467(1-2): 108～113

[16] [16] L.M.Liu, G. Song, M.L. Zhu.Low-power laser/arc hybrid welding behavior in AZ-based Mg alloys[J]. Metallurgical and Materials Transactions A, 2008, 39A(7): 1702～1711

[17] [17] L.M.Liu, X.J. Liu, S.H. Liu. Microstructure of laser-TIG hybrid welds of dissimilar Mg alloy and Al alloy with Ce as interlayer[J]. Scripta Materialia, 2006, 55(4): 383～386

[18] [18] G.Phanikumar, P. Dutta, K. Chattopadhyay. Continuous welding of Cu-Ni dissimilar couple using CO2 laser[J]. Science and Technology of Welding and Joining, 2005, 10(2): 158～166

[19] [19] T.A.Mai, A.C. Spowage. Characterisation of dissimilar joints in laser welding of steel-kovar, copper-steel and copper-aluminium. materials science and engineering a-structural materials[J]. Properties Microstructure and Processing, 2004, 374(1-2): 224～233

[20] [20] Zhu Ying, Zhang Mo, Wang Guojian et al.. The effect of different crystal conditions of filler metal on vacuum brazing of TiAl alloy and 42CrMo[J]. China Welding, 2007, 16(4): 17～19

[21] [21] M. Pang, G. Yu, H.H.Wang et al..Microstructure study of laser welding cast nickel-based superalloy K418[J]. Journal of Materials Processing Tech., 2008，207(1-3): 271～275

[22] [22] X.B. Liu, G. Yu, M. Pang et al.. Dissimilar autogenous full penetration welding of superalloy K418 and 42CrMo steel by a high power CW Nd∶YAG laser[J]. Applied Surface Science, 2007, 253(17): 7281～7289

[23] [23] Pang Ming, Yu Gang, Liu Zhao et al.. Dissimilar metal of K418 and 42CrMo full penetration laser welding[J]. Chinese J. Lasers, 2006, 33(8):1122～1126

[24] [24] A.Matsunawa, N.Seto, J.D.Kim et al.. Dynamics of keyhole and molten pool in high-power CO laser welding[C]. SPIE, 2000, 3888: 34～45

[25] [25] D.T.Swift-Hook, A.E.F.Gick. Penetration welding with lasers[J]. Research Supplement, 1973, 52(11): 492～498

[26] [26] Mazumder J. W. M. Steen. Heat transfer model for cw laser material processing[J]. J.Appl. Phys., 1980, 51: 941～950

[27] [27] J.Dowden, N.Postacioglu, M.Davis et al.. A keyhole model in penetration welding with a laser[J]. J.Phys. D: Appl. Phys., 1987, 20(1):36～44

[28] [28] J.Dowden, P.Kapadia, N.Postacioglu. An analysis of the laser-plasma interaction in laser keyhole welding[J]. J. Phys. D: Appl. Phys., 1989, 22:741～749

[29] [29] J.Dowden, P.Kapadia. A mathematical investigation of the penetration depth in keyhole welding with continuous CO2 lasers[J]. J. Phys. D:Appl. Phys., 1995, 28(11):2252～2261

[30] [30] A.Kaplan. A model of deep penetration laser welding based on calculation of the keyhole profile[J]. J. Phys. D: Appl. Phys., 1994,27: 1805～1814

[31] [31] C.Lampa. An analytical thermodynamic model of laser welding[J]. J. Phys.D:Appl. Phys., 1997, 30: 1293～1299

[32] [32] N.Chakraborty, S.Chakraborty. Modelling of turbulent molten pool convection in laser welding of a copper-nickel dissimilar couple[J]. International Journal of Heat and Mass Transfer, 2007, 50(9-10): 1805～1822