[1] Zhao X K, Xing D S, Liu D Y. Research and application development on laser micro joining technology[J]. Aeronautical Manufacturing Technology, 60, 28-34(2017).

[2] Kumar N, Masters I, Das A. In-depth evaluation of laser-welded similar and dissimilar material tab-to-busbar electrical interconnects for electric vehicle battery pack[J]. Journal of Manufacturing Processes, 70, 78-96(2021).

[3] Katrakova-Krüger D, Pegoraro L, Salmaso L et al. Laser welding of nitinol thin foils: mechanical properties and microstructure depending on process parameters[J]. Metallurgical and Materials Transactions A, 54, 998-1009(2023).

[4] Häusler A, Helm J, Hollatz S, Poprawe R, Häfner C, Wester R et al. Laserbeam microwelding[M]. Tailored light 2. RWTHedition, 599-615(2024).

[5] Deepak J R, R P A , Sundar S S. Applications of lasers in industries and laser welding: a review[J/OL]. Materials Today: Proceedings, 1-6. https:∥www.sciencedirect.com/science/article/pii/S221478532300620X?via%3Dihub

[6] Yoon H S, Bang H S. The effect of wobbling on the welding characteristics in Al/Cu fiber laser welded joints[J]. The International Journal of Advanced Manufacturing Technology, 127, 5343-5352(2023).

[7] Kumar A, Neogy S, Keskar N et al. Studies on welding of thin stainless steel sheets with pulsed nanosecond fiber laser in butt joint configuration[J]. Journal of Laser Applications, 35, 042013(2023).

[8] Xu J Y, Jiang Q, Yang J et al. A review on ultrafast laser microwelding of transparent materials and transparent material-metals[J]. Metals, 13, 876(2023).

[9] Malinauskas M, Žukauskas A, Hasegawa S et al. Ultrafast laser processing of materials: from science to industry[J]. Light, Science & Applications, 5, e16133(2016).

[10] Jain V K, Sidpara A, Balasubramaniam R et al. Micromanufacturing: a review: part I[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228, 973-994(2014).

[11] Naeem M, Katayama S. Developments in laser microwelding technology[M]. Handbook of laser welding technologies, 163-211(2013).

[12] Zhou Y[M]. Microjoining and nanojoining(2008).

[13] Vollertsen F, Wagner F, Thomy C. Micro welding for environmental-friendly products[C], 308(2007).

[15] O’Toole L, Kang C W, Fang F Z. Precision micro-milling process: state of the art[J]. Advances in Manufacturing, 9, 173-205(2021).

[16] Wojciechowski S. Estimation of minimum uncut chip thickness during precision and micro-machining processes of various materials: a critical review[J]. Materials, 15, 59(2021).

[17] Maina M, Okamoto Y, Inoue R et al. Influence of surface state in micro-welding of copper by Nd: YAG laser[J]. Applied Sciences, 8, 2364(2018).

[18] Song D B, Kim R, Choi K et al. Effects of beam shape on the microstructures and mechanical properties during thin-foil laser welding[J]. Metals, 13, 916(2023).

[19] Jamaludin M N, Quazi M M, Aiman M H et al. Distortion in laser micro welding of stainless steel SS304 foils[J/OL]. Materials Today: Proceedings, 1-6. https:∥www.sciencedirect.com/science/article/pii/S2214785323049593?via%3Dihub

[20] Dong Z S, Pan R, Zhou T S et al. Microstructure and mechanical property of Ti/Cu ultra-thin foil lapped joints with different weld depths by nanosecond laser welding[J]. Journal of Manufacturing Processes, 108, 88-97(2023).

[21] Woizeschke P, Vollertsen F. Laser keyhole micro welding of aluminum foils to lap joints even with large gap sizes[J]. CIRP Annals, 69, 237-240(2020).

[22] Olowinsky A, Spurk C, Helm J et al. Laser-based joining of electrode stacks for automated large-scale production of Li-ion battery cells[J]. Energy Technology, 11, 2200770(2023).

[23] Patschger A, Bliedtner J, Bergmann J P. Process-limiting factors and characteristics of laser-based micro welding[J]. Physics Procedia, 56, 740-749(2014).

[24] Wautelet M. Scaling laws in the macro-, micro- and nanoworlds[J]. European Journal of Physics, 22, 601-611(2001).

[25] Solchenbach T, Plapper P. Mechanical characteristics of laser braze-welded aluminium-copper connections[J]. Optics & Laser Technology, 54, 249-256(2013).

[26] Patschger A, Bliedtner J, Hild M et al. Flexible and efficient laser remote welding of ultra-thin metal foils[J]. Journal of Laser Applications, 24, 052005(2012).

[27] Du W Z, Huang T, Cao Z et al. Galvanometer scanning laser-micro-welding of AISI304 stainless-steel foil[J]. Chinese Journal of Lasers, 46, 1102006(2019).

[28] Xiao X F, Fu Y S, Ye X J et al. Analysis of heat transfer and melt flow in conduction, transition, and keyhole modes for CW laser welding[J]. Infrared Physics & Technology, 120, 103996(2022).

[29] Rai R, Elmer J W, Palmer T A et al. Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti-6Al-4V, 304L stainless steel and vanadium[J]. Journal of Physics D: Applied Physics, 40, 5753-5766(2007).

[30] Svenungsson J, Choquet I, Kaplan A F H. Laser welding process—a review of keyhole welding modelling[J]. Physics Procedia, 78, 182-191(2015).

[31] Du W Z, Xu J J, Xiao R S et al. Laser micro-welding of stainless steel foil: welding mode, microstructure and corrosion properties[J]. Optics & Laser Technology, 161, 109241(2023).

[32] Karagiannis S, Chryssolouris G. Nd∶YAG laser welding: an overview[J]. Proceedings of SPIE, 5131, 260-264(2003).

[33] Abe N, Funada Y, Ishide M. Micro-welding of thin foil with direct diode laser[J]. Proceedings of SPIE, 5063, 287-291(2003).

[34] Shi W, Fang Q, Zhu X S et al. Fiber lasers and their applications[J]. Applied Optics, 53, 6554-6568(2014).

[35] Pelaprat J M, Finuf M, Fritz R et al. Seeing things in a new light: high power blue lasers for metal processing[J]. Laser Technik Journal, 15, 39-41(2018).

[36] Grabmann S, Tomcic L, Zaeh M F. Laser beam welding of copper foil stacks using a green high power disk laser[J]. Procedia CIRP, 94, 582-586(2020).

[37] Engler S, Ramsayer R, Poprawe R. Process studies on laser welding of copper with brilliant green and infrared lasers[J]. Physics Procedia, 12, 339-346(2011).

[38] Grabmann S, Kriegler J, Harst F et al. Laser welding of current collector foil stacks in battery production—mechanical properties of joints welded with a green high-power disk laser[J]. The International Journal of Advanced Manufacturing Technology, 118, 2571-2586(2022).

[39] Cha J H, Choi H W. Characterization of dissimilar aluminum-copper material joining by controlled dual laser beam[J]. The International Journal of Advanced Manufacturing Technology, 119, 1909-1920(2022).

[40] Huang H, Hu A M, Peng P et al. Femtosecond laser-induced microwelding of silver and copper[J]. Applied Optics, 52, 1211-1217(2013).

[41] Huang H, Yang L M, Bai S et al. Femtosecond fiber laser welding of dissimilar metals[J]. Applied Optics, 53, 6569-6578(2014).

[42] Sheikhbahaee H, Mirahmadi S J, Pakmanesh M R et al. Investigating sensitivity to process parameters in pulsed laser micro-welding of stainless steel foils[J]. Optics & Laser Technology, 148, 107737(2022).

[43] Ventrella V A, Berretta J R, De Rossi W. Application of pulsed Nd: YAG laser in thin foil microwelding[J]. International Journal of Materials and Product Technology, 48, 194(2014).

[44] Pakmanesh M R, Shamanian M. Optimization of pulsed laser welding process parameters in order to attain minimum underfill and undercut defects in thin 316L stainless steel foils[J]. Optics & Laser Technology, 99, 30-38(2018).

[45] Xu H, Guo X Y, Lei Y P et al. Welding deformation of ultra-thin 316 stainless steel plate using pulsed laser welding process[J]. Optics & Laser Technology, 119, 105583(2019).

[46] Hozoorbakhsh A, Hamdi M, Sarhan A A D M et al. CFD modelling of weld pool formation and solidification in a laser micro-welding process[J]. International Communications in Heat and Mass Transfer, 101, 58-69(2019).

[47] Matsuoka S, Okamoto Y, Okada A. Influence of weld bead geometry on thermal deformation in laser micro-welding[J]. Procedia CIRP, 6, 492-497(2013).

[48] Mehlmann B, Gehlen E, Olowinsky A et al. Laser micro welding for ribbon bonding[J]. Physics Procedia, 56, 776-781(2014).

[49] Lee S J, Choi K D, Lee S J et al. Welding properties of dissimilar Al-Cu thin plate by a single-mode fiber laser[J]. Metals, 12, 1957(2022).

[50] Dimatteo V, Ascari A, Liverani E et al. Experimental investigation on the effect of spot diameter on continuous-wave laser welding of copper and aluminum thin sheets for battery manufacturing[J]. Optics & Laser Technology, 145, 107495(2022).

[51] Fortunato A, Ascari A. Laser welding of thin copper and aluminum sheets: feasibility and challenges in continuous-wave welding of dissimilar metals[J]. Lasers in Manufacturing and Materials Processing, 6, 136-157(2019).

[52] Patschger A, Bliedtner J. Constraints and optimization of the laser microwelding process of thin metal foils[J]. Journal of Laser Applications, 29, 022408(2017).

[53] Velázquez de la Hoz J L, Cheng K. Development of an intelligent quality management system for micro laser welding: an innovative framework and its implementation perspectives[J]. Machines, 9, 252(2021).

[54] Seiler M, Patschger A, Tianis L et al. Experimental determination of influencing factors on the humping phenomenon during laser micro welding of thin metal sheets[J]. Journal of Laser Applications, 29, 022413(2017).

[55] Otto A, Patschger A, Seiler M. Numerical and experimental investigations of humping phenomena in laser micro welding[J]. Physics Procedia, 83, 1415-1423(2016).

[56] Seiler M, Patschger A, Bliedtner J. Investigations of welding instabilities and weld seam formation during laser microwelding of ultrathin metal sheets[J]. Journal of Laser Applications, 28, 022417(2016).

[57] Schmidt P A, Schmitz P, Zaeh M F. Laser beam welding of electrical contacts for the application in stationary energy storage devices[J]. Journal of Laser Applications, 28, 022423(2016).

[58] Ali S, Shin J. In-depth characterization of laser-welded aluminum-and-copper dissimilar joint for electric vehicle battery connections[J]. Materials, 15, 7463(2022).

[59] Solchenbach T, Plapper P, Greger M et al. Thermal and electrical aging of laser braze-welded aluminum-copper interconnects[J]. Translational Materials Research, 1, 015001(2014).

[60] Haubold M, Ganser A, Eder T et al. Laser welding of copper using a high power disc laser at green wavelength[J]. Procedia CIRP, 74, 446-449(2018).

[61] Zhang X D, Miyagi M, Okamoto S. Fundamental study on welding properties of 515 nm green laser[C], 458-462(2014).

[62] Ismail M I S, Okamoto Y, Okada A et al. Experimental investigation on micro-welding of thin stainless steel sheet by fiber laser[J]. American Journal of Engineering and Applied Sciences, 4, 314-320(2011).

[63] Kim J, Kim S, Kim K et al. Effect of beam size in laser welding of ultra-thin stainless steel foils[J]. Journal of Materials Processing Technology, 233, 125-134(2016).

[64] Rohde M, Markert C, Pfleging W. Laser micro-welding of aluminum alloys: experimental studies and numerical modeling[J]. The International Journal of Advanced Manufacturing Technology, 50, 207-215(2010).

[65] Lee S J, Nakamura H, Kawahito Y et al. Effect of welding speed on microstructural and mechanical properties of laser lap weld joints in dissimilar Al and Cu sheets[J]. Science and Technology of Welding and Joining, 19, 111-118(2014).

[66] Mathivanan K, Plapper P. Laser welding of dissimilar copper and aluminum sheets by shaping the laser pulses[J]. Procedia Manufacturing, 36, 154-162(2019).

[67] Dimatteo V, Ascari A, Fortunato A. Continuous laser welding with spatial beam oscillation of dissimilar thin sheet materials (Al-Cu and Cu-Al): process optimization and characterization[J]. Journal of Manufacturing Processes, 44, 158-165(2019).

[68] Zhu B H, Zhen L, Xia H B et al. Effect of the scanning path on the nanosecond pulse laser welded Al/Cu lapped joint[J]. Optics & Laser Technology, 139, 106945(2021).

[69] Li Q G, Zhu B H, Li H Y et al. Effect of spiral scan distance on the nanosecond-pulsed-laser lap joint of Al/Cu[J]. Optics & Laser Technology, 158, 108896(2023).

[70] Huang W K, Cai W, Rinker T J et al. Effects of laser oscillation on metal mixing, microstructure, and mechanical property of aluminum-copper welds[J]. International Journal of Machine Tools and Manufacture, 188, 104020(2023).

[71] Kenda M, Klobčar D, Nagode A et al. Analysis and prevention of weld crater cracking in circumferential laser microwelding of automotive pressure sensors[J]. Engineering Failure Analysis, 128, 105579(2021).

[72] Yi P Y, Du X Y, Kan Y Y et al. Modeling and experimental study of laser welding distortion of thin metallic bipolar plates for PEM fuel cells[J]. International Journal of Hydrogen Energy, 40, 4850-4860(2015).

[73] Otte F, Stute U, Ostendorf A. Microwelding of electronic components with 532 nm laser radiation[J]. Proceedings of SPIE, 6458, 645804(2007).

[74] Ely K J, Hall P, Zhou Y, Zhou Y, Breyen M D. Microwelding methods in medical components and devices[M]. Joining and assembly of medical materials and devices, 47-78(2013).

[75] Cao X L, Jiang W C, Zhang W C et al. Design and verification of medium energy telescope onboard HXMT satellite[J]. Spacecraft Engineering, 27, 127-133(2018).

[76] Huang T, Du W Z, Su K et al. Laser microwelding technology and equipment for cross-scale collimator grid of deep-space exploration satellite[J]. Chinese Journal of Lasers, 49, 1002402(2022).

[77] Ji L, Yang W X, Xiao R S. Study on laser micro welding of crossed tantalum foils[J]. Applied Laser, 33, 601-605(2013).

[78] Zwicker M F R, Moghadam M, Zhang W et al. Automotive battery pack manufacturing—a review of battery to tab joining[J]. Journal of Advanced Joining Processes, 1, 100017(2020).

[79] Lee S S, Kim T H, Hu S J et al. Joining technologies for automotive lithium-ion battery manufacturing: a review[C], 541-549(2011).

[80] Das A, Li D Z, Williams D et al. Joining technologies for automotive battery systems manufacturing[J]. World Electric Vehicle Journal, 9, 22(2018).