[1] Wu J, Wang X Q, Wang W et al. Microstructure and strength of selectively laser melted AlSi10Mg[J]. Acta Materialia, 117, 311-320(2016).

[2] Li B, Wang H W, Jie J C et al. Effects of yttrium and heat treatment on the microstructure and tensile properties of Al-7.5Si-0.5Mg alloy[J]. Materials & Design, 32, 1617-1622(2011).

[3] Miao Q Y, Liu M R, Zhao K et al. Research progress on technologies of additive manufacturing of aluminum alloys[J]. Laser & Optoelectronics Progress, 55, 011405(2018).

[4] Huang Y, Huang J, Nie P L. Microstructures and textures of 6016 and 5182 aluminum laser welded joints[J]. Chinese Journal of Lasers, 46, 0402003(2019).

[5] Zhao Z G, Bai L, Li L et al. Status and progress of selective laser melting forming technology[J]. Aeronautical Manufacturing Technology, 463, 46-49(2014).

[6] Zhang S, Wei Q S, Cheng L Y et al. Effects of scan line spacing on pore characteristics and mechanical properties of porous Ti6Al4V implants fabricated by selective laser melting[J]. Materials & Design, 63, 185-193(2014).

[7] Qian D Y, Chen C J, Zhang M et al. Study on microstructure and micro-mechanical properties of porous aluminum alloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 43, 0403002(2016).

[8] Liao C H, Zhou J, Shen H. Electrochemical corrosion behaviors before and after laser polishing of additive manufactured TC4 titanium alloy[J]. Chinese Journal of Lasers, 47, 0102003(2020).

[9] Rao H, Giet S, Yang K et al. The influence of processing parameters on aluminium alloy A357 manufactured by selective laser melting[J]. Materials & Design, 109, 334-346(2016).

[10] Kimura T, Nakamoto T. Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting[J]. Materials & Design, 89, 1294-1301(2016).

[11] Thijs L, Kempen K, Kruth J P et al. Fine-structured aluminium products with controllable texture by selective laser melting of prealloyed AlSi10Mg powder[J]. Acta Materialia, 61, 1809-1819(2013).

[12] Martin J H, Yahata B D, Hundley J M et al. 3D printing of high-strength aluminium alloys[J]. Nature, 549, 365-369(2017).

[13] Spierings A B, Dawson K, Kern K et al. SLM-processed Sc- and Zr- modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment[J]. Materials Science and Engineering: A, 701, 264-273(2017).

[14] [14] Aboulkhair NT, Everitt NM, AshcroftI, et al., 2014, 1/2/3/4: 77- 86.

[15] Louvis E, Fox P, Sutcliffe C J. Selective laser melting of aluminium components[J]. Journal of Materials Processing Technology, 211, 275-284(2011).

[16] Read N, Wang W, Essa K et al. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development[J]. Materials & Design, 65, 417-424(2015).

[17] Li W, Li S, Liu J et al. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism[J]. Materials Science and Engineering: A, 663, 116-125(2016).

[18] Wang T, Chen X H, Wang Z D. Anisotropy of crystal-melt interfacial energy for Al-Si and Al-Si-Sc alloys[J]. Rare Metal Materials and Engineering, 46, 1566-1571(2017).

[19] Zhang G W, Hou H, Zhao Y H et al. Phase field model for highly anisotropic interfacial energy in crystal growth[J]. Foundry Technology, 29, 239-243(2008).

[20] Tang D X, Liu Y J, Zhang H J[M]. Rare metal materials, 509-513(2011).

[21] He B, Qin M, Liang L Q et al. Effect of Sc content on microstructure and mechanical properties of Al-Si casting alloy[J]. Foundry Technology, 38, 2360-2364(2017).

[22] Li G R, Wang H M, Zhao Y T et al. Effect mechanism of yttrium on melting and solidification of 7055 aluminum alloy[J]. Rare Metal Materials and Engineering, 39, 80-84(2010).

[23] Wei P, Wei Z, Xhen Z et al. The AlSi10Mg samples produced by selective laser melting: single track, densification, microstructure and mechanical behavior[J]. Applied Surface Science, 408, 38-50(2017).

[24] Li X P, Ji G, Chen Z et al. Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility[J]. Acta Materialia, 129, 183-193(2017).

[25] Pan F S, Zhou S Z. An investigations on the eutectic compound of Al-Mg-Si-Re alloys[J]. Journal of Mechanical Engineering, 26, 7-11(1990).

[26] Ding P D, Pan F S, Zhou S Z. Effect of rare earth on as cast structure of Al-Mg-Si alloy[J]. Ordnance Material Science and Engineering, 12, 48-55, 47(1989).