[1] [1] GJB 151B2013, Electromagic emission susceptibility requirements measurements f military equipment subsystems[S]

[2] [2] GBT 17626.212014, Electromagic compatibility—testing measurement techniques—reverberation chamber test methods[S]

[3] [3] Wang Qingguo, Cheng Erwei. Theies applications of electromagic reverberation chamber[M]. Beijing: National Defense Industry Press, 2013

[4] [4] Hill D A. Electromagic fields in cavities: deterministic statistical theies[M]. Piscataway: WileyIEEE Press, 2009.

[5] Andrieu G. On the possible benefits of inserting metallic diffractors to improve low frequency performance of reverberation chambers[J]. IEEE Transactions on Electromagnetic Compatibility, 63, 304-307(2021).

[6] [6] IEC 61000421: 2011, Electromagic compatibility (EMC) part 421: testing measurement techniques—reverberation chamber test methods[S].

[7] Sorrentino A, Nunziata F, Cappa S, et al. A semi-reverberation chamber configuration to emulate second-order descriptors of real-life indoor wireless propagation channels[J]. IEEE Transactions on Electromagnetic Compatibility, 63, 3-10(2021).

[8] Reis A, Sarrazin F, Richalot E, et al. Radar cross section pattern measurements in a mode-stirred reverberation chamber: theory and experiments[J]. IEEE Transactions on Antennas and Propagation, 69, 5942-5952(2021).

[9] Jiang Lin, Wang Qingguo, Cheng Erwei. Modelling and experimental study of the number of independent samples in reverberation chamber with mechanical stirring[J]. High Power Laser and Particle Beams, 25, 3050-3054(2013).

[10] Cheng Erwei, Liu Yifei. Theory and application of frequency stirring reverberation chamber[J]. High Power Laser and Particle Beams, 27, 103202(2015).

[11] Shen Yuanmao, Tao Hongbo, Li Ji, . Research on performance improvement of source stirring reverberation chamber introduced by stationary diffusers[J]. High Voltage Engineering, 40, 918-922(2014).

[12] Kouveliotis N K, Trakadas P T, Capsalis C N. Examination of field uniformity in vibrating intrinsic reverberation chamber using the FDTD method[J]. Electronics Letters, 38, 109-110(2002).

[13] Kouveliotis N K, Trakadas P T, Capsalis C N. FDTD modeling of a vibrating intrinsic reverberation chamber[J]. Progress in Electromagnetics Research, 39, 47-59(2003).

[14] [14] Leferink F, Boudenot J C, Van Etten W. Experimental results obtained in the vibrating intrinsic reverberation chamber[C]IEEE International Symposium on Electromagic Compatibility. Symposium Recd (Cat. No. 00CH37016). 2000: 639644.

[15] [15] Leferink F. Insitu high field strength testing using a transptable reverberation chamber[C]2008 AsiaPacific Symposium on Electromagic Compatibility 19th International Zurich Symposium on Electromagic Compatibility. 2008: 379382.

[16] [16] Serra R, Leferink F B J. Optimizing the stirring strategy f the vibrating intrinsic reverberation chamber[C]9th International Symposium on EMC 20th International Wroclaw Symposium on Electromagic Compatibility. 2010: 457462.

[17] [17] Hara M, Takahashi Y, VogtArdatjew R, et al. Statistical analysis f reverberation chamber with flexible shaking walls with various amplitudes[C]2018 International Symposium on Electromagic Compatibility. 2018: 694698.

[18] [18] Serra R, Leferink F, Canavero F. “Goodbutimperfect” electromagic reverberation in a VIRC[C]2011 IEEE International Symposium on Electromagic Compatibility. 2011: 954959.

[19] Liu Yifei, Chen Yongguang, Cheng Erwei, . Material shielding effectiveness calculation for nested reverberation chamber method based on energy conservation principle[J]. High Voltage Engineering, 40, 945-950(2014).

[20] [20] Skrzypczynski J. Dual vibrating intrinsic reverberation chamber used f shielding effectiveness measurements[C]10th International Symposium on Electromagic Compatibility. 2011: 133136.

[21] Cheng Erwei, Wang Pingping, Zhao Min, . Design and performance evaluation of boundary deformation reverberation chamber[J]. High Power Laser and Particle Beams, 33, 123002(2021).

[22] [22] Xu Hognqiang. Development of automatic calibration test software f reverberation chamber based on C# the research of field strength acteristics inside a reverberation chamber [D]. Beijing: Beijing Jiaotong University, 2014

[23] Su Zhengming, Liu Qiang, Zhao Yuan, . Design and application of flexible shielding material based reverberation chamber[J]. High Power Laser and Particle Beams, 30, 073202(2018).

[24] Chen Chaochan, Zhu Siting, Cai Qing. Uncertainty analysis and evaluation of shielding effectiveness measurement uncertainty for electromagnetic shielding films[J]. Scientific and Technological Innovation Information, 35-36(2020).

[25] [25] Qin Gaoqiang. Analysis of influence of EUT electrical size on uncertainty of reverberation chamber immunity test[D]. Nanjing: Southeast University, 2018

[26] Cheng Erwei, Wang Pingping, Zhang Yi, . Research on shielding effectiveness test technology of boundary deformation mutual coupling reverberation chamber[J]. High Voltage Engineering, 49, 3102-3109(2023).