[1] [1] Zhai Yufeng, Wang Xinhong, Huang Jian. Microstructure and properties of TiC-Mo2C particles reinforced Fe-based composite coatings produced by laser cladding［J］. Chinese J. Lasers, 2009, 36(12): 3287～3292

[2] [2] Cao Huaihua, Chen Chuanzhong, Sun Yiwang. Laser cladding of TiC-Co metal ceramics on the W18Cr4V steel［J］. Appl. Laser Technol., 1999, 19(3): 103～106

[3] [3] W. P. Jiang, P. Mollan. Nanocrystalline TiC powder alloying and glazing of H13 steel using a CO2 laser for improved life of die-casting dies［J］. Surf. Coat. Technol., 2001, 135(2-3): 139～149

[4] [4] W. H. Jiang, R. Kovacevic. Laser deposited TiC/H13 tool steel composite coatings and their erosion resistance［J］. J. Mater. Process. Technol., 2007, 186(1-3): 331～338

[5] [5] Tang Xiaodan, Yao Jianhua, Kong Fanzhi et al.. Influence of TiC on microstructure and performance of H13-TiC composite layer prepared by laser cladding［J］. Hot Working Technology, 2009, 38(14): 92～96

[6] [6] P. H. Chong, H. C. Man, T. M. Yue. Microstructure and wear properties of laser surface-cladded Mo-WC MMC on AA6061 aluminum alloy［J］. Surf. Coat. Technol., 2001, 145(1-3): 51～59

[7] [7] K. Van Acker, D. Vanhoyweghen, R. Persoons et al.. Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings［J］. Wear, 2005, 258(1-4): 194～202

[8] [8] C. Tassin, F. Laroudie, M. Pons et al.. Carbide-reinforced coatings on AISI 316L stainless steel by laser surface alloying［J］. Surf. Coat. Technol., 1995, 77(1-3): 450～455

[9] [9] D. Liu, S. Q. Zhang, A. Li et al.. Microstructure and tensile properties of laser melting deposited TiC/TA15 titanium matrix composites［J］. J. Alloys and Compounds, 2009, 485(1-2): 156～162

[10] [10] R. L. Sun, D. Z. Yang, L. X. Gu. Laser cladding of Ti-6Al-4V alloy with TiC and TiC+NiCrBS powders［J］. Surf. Coat. Technol., 2001, 135(2-3): 307～312

[11] [11] M. Kouzeli, L. Weber, C. San Marchi et al.. Influence of damage on the tensile behaviour of pure aluminium reinforced with ≥40 vol.pct alumina particles［J］. Acta Materialia, 2001, 49(18): 3699～3709

[12] [12] Q. G. Wang. Microstructural effects on the tensile and fracture behavior of aluminum casting alloys A356/357［J］. Chem. Mater. Sci., 2003, 34(12): 2887～2899

[13] [13] Tae-Won Kim. Heterogeneous void distribution in aluminum metal matrix composites and its effect on deformation-failure processes［J］. Scripta Materialia, 2006, 55(12): 1115～1118

[14] [14] Mao Xiaonan, Zhang Tingjie, Zhang Xiaoming. The deformation of TiC particle reinforced titanium matrix composite［J］. Rare Metal Materials and Engineering, 2001, 35(4): 245～248

[15] [15] C. S. Ramesha, R. Keshavamurthy, B. H. Channabasappab et al.. Microstructure and mechanical properties of Ni-P coated Si3N4 reinforced Al6061 composites［J］. Mater. Sci. Engng., 2009, 502(1-2): 99～106

[16] [16] Antonio A. M. da Silva, Axel Meyer, Jorge F. dos Santos. Mechanical and metallurgical properties of friction-welded TiC particulate reinforced Ti-6Al-4V［J］. Composites Sci. Technol., 2004, 64(10-11): 1495～1501

[17] [17] T. S. Srivatsan, Meslet Al-Hajri, C. Smith et al.. The tensile response and fracture behavior of 2009 aluminum alloy metal matrix composite［J］. Mater. Sci. Engng., 2003, 346(1-2): 91～100

[18] [18] Tsongi Chai, Chia Kai Chou. Mechanical properties of laser-welded cast titanium joints under different conditions［J］. J. Prosthetic Dentistry, 1998, 79(4): 477～483

[19] [19] Dongdong Gu, Yifu Shen. Influence of reinforcement weight fraction on microstructure and properties of submicron WC-Co/Cu bulk MMCs prepared by direct laser sintering［J］. J. Alloys and Compounds, 2007, 431(1-2): 112～120

[20] [20] P. J. Maziasz, E. A. Payzant, M. E. Schlienger et al.. Residual stresses and microstructure of H13 steel formed by combining two different direct fabrication methods［J］. Scripta Materialia, 1998, 39(10): 1471～1476

[21] [21] Aude Hauert, Andreas Rossoll, Andreas Mortensen. Ductile-to-brittle transition in tensile failure of particle-reinforced metals［J］. J. Mech. Phys. Solids, 2009, 57(3): 473～499

[22] [22] Y. Benveniste. A new approach to the application of Mori-Tanaka′s theory in composite materials［J］. Mech. Mater., 1987, 6(2): 147～157

[23] [23] Jiang Fang, Ning Jianguo. Elastoplastic behavior of particle reinforced metal matrix composites considering the interfacial debonding［J］. Journal of Materials Engineering, 2006, 96(S1): 366～369

[24] [24] J. D. Eshelby. The determination of the elastic field of an ellipsoidal inclusion and related problems［J］. Proc. R. Soc. Lond. A, 1957, 241(1226): 376～396

[25] [25] I. Doghri, A. Ouaar. Homogenization of two-phase elasto-plastic composite materials and structures-study of tangent operators, cyclic plasticity and numerical algorithms［J］. Internat. J. Solids and Structures, 2003, 40(7): 1681～1712

[26] [26] I. Doghri, L. Tinel. Micromechanical modeling and computation of elasto-plastic materials reinforced with distributed-orientation fibers［J］. Internat. J. Plasticity, 2005, 21(10): 1919～1940